Key takeaways
- Markup is profit as a share of cost; margin is profit as a share of price. A 50% markup is only a 33.3% margin.
- To hit a target margin, divide cost by one minus the margin. Never add the margin percentage to cost.
- Small errors compound: a job priced with a 20% markup instead of a 20% margin earns about 16.7%, not 20%.
- Discounts hit margin harder than they look; a 10% discount on a 40% margin job removes a quarter of the profit.
- Thin margins matter in a trade where only 42.5% of construction establishments opened in 2015 were still operating ten years later[1].
Two numbers that sound alike
Markup and margin describe the same profit from two different starting points. Markup compares profit with what something cost you. Margin compares profit with what you charged. Because price is always larger than cost when you make money, the margin percentage is always smaller than the markup percentage for the same job.
- Markup = (price − cost) ÷ cost
- Margin = (price − cost) ÷ price
- Price from a target margin = cost ÷ (1 − margin)
- Convert markup to margin: margin = markup ÷ (1 + markup)
- Convert margin to markup: markup = margin ÷ (1 − margin)
The mistake happens when an owner decides on a target margin, for example 40%, and then adds 40% to cost. That is a 40% markup, which produces a margin of about 28.6%. Every price in the book is then lower than intended, and the gap never shows up on a single invoice.
Conversion table
| Markup on cost | Margin on price | Multiply cost by |
|---|---|---|
| 10% | 9.1% | 1.10 |
| 20% | 16.7% | 1.20 |
| 25% | 20.0% | 1.25 |
| 33.3% | 25.0% | 1.333 |
| 50% | 33.3% | 1.50 |
| 66.7% | 40.0% | 1.667 |
| 100% | 50.0% | 2.00 |
| 150% | 60.0% | 2.50 |
| 200% | 66.7% | 3.00 |
Print the table and tape it inside the office binder or pin it in the price book software. The right-hand column is the multiplier: cost multiplied by it gives the price that achieves the margin in the middle column.
Worked example 1: a part
Example (fictional): a pressure-reducing valve costs the shop $200. The owner wants a 40% margin on materials. Wrong way: add 40% to cost, price $280, profit $80, margin $80 ÷ $280 = 28.6%. Right way: divide by 0.60, price $333.33, profit $133.33, margin $133.33 ÷ $333.33 = 40%. The difference on one part is about $53.
Multiply that difference across every part in a year and it becomes one of the largest leaks in a small shop. The material markup guide covers how to set the material target in the first place, including sliding scales by part cost.
Worked example 2: a whole job
Example (fictional): a water heater replacement costs the shop $1,000 in labor, overhead share and materials. The owner wants a 20% net margin. With a 20% markup the price is $1,200 and profit is $200, a 16.7% margin. With the margin formula the price is $1,000 ÷ 0.80 = $1,250 and profit is $250, a true 20% margin. Over 300 similar jobs a year, the markup mistake costs $15,000 in profit.
The same logic applies to the billable labor rate. If overhead and labor cost per billable hour come to a certain figure, profit has to be added with the margin formula, as shown in how to calculate your billable labor rate.
Gross margin and net margin
Plumbing owners use margin in two ways, and mixing them causes a second kind of mistake.
- Gross margin is price minus direct costs, meaning field labor on the job and materials, divided by price. It shows what each job contributes toward overhead and profit.
- Net margin is what remains after overhead as well, divided by price. It is the business’s actual profit rate.
- A job can show a healthy gross margin and still lose money if gross margin is smaller than the overhead share each job must carry.
- When someone quotes a margin target, ask which one they mean before using it.
Industry figures help keep these in proportion. Payroll alone equalled about 26.9% of receipts at plumbing, heating and AC contractors in 2022[2]. Materials, vehicles, insurance, office costs and profit all have to fit in what remains.
The discount trap
Discounts come straight out of margin, so they cut profit by a larger share than the discount percentage. That is easy to miss when a tech offers money off at the door.
Example (fictional): a job priced at $1,000 has a cost of $600, so profit is $400 and margin is 40%. A 10% discount drops the price to $900. Cost is still $600, so profit falls to $300, a margin of 33.3%. The customer saw 10% off; the shop lost 25% of its profit on the job.
Before any discount program, check how much extra work it must bring in to break even. If the 10% discount in the example above costs a quarter of the profit per job, the shop needs roughly a third more jobs at the discounted price to earn the same total profit. Many coupon programs never reach that.
Why this matters more for small shops
Most plumbing businesses are small enough that a few points of margin decide whether the year is good or bad. About 63% of plumbing, heating and AC contractor firms had annual receipts under $1 million in 2022[3]. In construction overall, 83.3% of establishments opened in March 2015 survived their first year, 57.5% survived five years and 42.5% were still operating after ten[1].
Source: U.S. Bureau of Labor Statistics, 2015-2025[1]
Show the data
| Period | Value |
|---|---|
| After 1 year | 83.3% |
| After 5 years | 57.5% |
| After 10 years | 42.5% |
Pricing is not the only reason businesses close, but persistent under-pricing leaves no cushion for a slow season, a big repair to a truck or a rise in wages. Average hourly earnings at plumbing, heating and AC contractors reached $42.38 in September 2026, up from $40.59 a year earlier[4]. If prices were set with the wrong formula, each cost increase eats into an already smaller margin.
Setting up the formulas once
Pick your targets in margin terms
Write a target gross margin for materials and a target net margin for jobs. Use margin language everywhere so nobody converts in their head.
Build the multiplier into the tools
In the price book or spreadsheet, store the margin target and calculate price as cost divided by one minus the target.
Lock the formula
Protect the cells or settings so a quick edit cannot replace the formula with a flat percentage add-on.
Test with known numbers
For example, enter a cost of 100 and a 40% margin. The price must come out at 166.67. If it shows 140, the formula is a markup.
Train the office and techs
Explain the difference with the discount example. Most people understand it immediately once they see the profit fall.
Reading your numbers in margin terms
Once pricing uses margin, read the books the same way. Ask your bookkeeper for a monthly report that shows revenue, direct job costs and gross margin by job type: service repairs, water heaters, drains, sewer and installs. Then compare each with its target.
- If a job type sits well below target month after month, check its time standards and material costs before blaming the techs.
- If gross margin is on target but net margin is not, overhead is under-recovered; revisit overhead per billable hour.
- If margins swing a lot between months, look for one-off large jobs or discounts that were not recorded as discounts.
- Keep the same definitions every month, so the trend can be trusted.
If a customer asks about your markup
Occasionally a customer who bought a part online asks why yours costs more. Keep the answer short and factual: “Our price includes sourcing the right part, carrying it on the truck so we can finish today, handling returns and warranty, and standing behind the installation.” Do not quote your markup percentage; it invites a negotiation about a number that does not reflect what the customer is buying. For jobs where the customer insists on supplying parts, see customer-supplied parts policy.
A simple final check before pricing anything new: write the cost, the target margin and the price on one line, and divide profit by price. If the result does not match the target, the formula is wrong. It takes ten seconds and catches the mistake that costs small shops the most. For the numbers that feed the cost line, see overhead per billable hour.
Frequently asked questions
What is the difference between markup and margin?
Markup is profit divided by cost. Margin is profit divided by price. For the same job, the margin percentage is always lower than the markup percentage.
What markup gives a 50% margin?
A 100% markup, which means doubling the cost. Price equals cost divided by one minus 0.50.
Should plumbing companies price with markup or margin?
Set targets as margins and calculate prices with the margin formula. Markup is fine as a multiplier, provided it is derived from the margin you want.
References
U.S. Bureau of Labor Statistics (2015-2025). Business Employment Dynamics: Establishment survival, Construction (Table 7) (opens in a new tab) ↑
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) ↑
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: Firms by industry and enterprise receipts size (opens in a new tab) ↑
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) ↑