Key takeaways
- Decide your policy in advance by part category; improvising at the door leads to inconsistent prices and warranty disputes.
- Many shops accept finished fixtures and trim but decline valves, supply lines, water heaters and anything inside the wall.
- Install customer parts on labor-only terms: workmanship covered, part not covered, extra visits charged if the part is wrong or faulty.
- Check every customer part before work starts, including lead-free compliance for drinking water use[1] and flow ratings[2].
- Put the terms in writing and get a signature before the work, not after a failure.
Why customers bring their own parts
Customers supply their own parts for good reasons: they chose a faucet to match a remodel, a relative bought a toilet on sale, or they compared a part price online and decided to save. The request is reasonable. The risk for the plumber is that the installation becomes your responsibility while the part’s quality, completeness and suitability are not under your control.
- Wrong part: incompatible connections, wrong rough-in size, missing valves or trim kits.
- Low quality or counterfeit: parts that fail early, sometimes in ways that look like an installation fault.
- Compliance gaps: products not certified for drinking water or not meeting local code.
- Missing pieces: supply lines, wax rings, mounting hardware that must be sourced on the spot.
- Return trips: a defective part means a second visit, and somebody has to pay for it.
- Warranty confusion: customers often assume the plumber’s warranty covers everything installed.
There is also a reputational side. Among Americans who read online reviews, 54% pay more attention to extremely negative reviews[3]. A leaking customer-supplied faucet usually produces a review about the plumber, not the part.
Choose a policy by part category
Most shops land on a middle path: accept parts the customer chose for appearance, decline parts where failure causes damage or where code and safety matter most.
| Part category | Common policy | Reason |
|---|---|---|
| Faucets, showerheads, decorative trim | Accept, labor-only | Customer choice of style; failure is usually visible and contained |
| Toilets and sinks | Accept, labor-only, after inspection | Check rough-in, condition and included parts first |
| Supply lines, wax rings, small connectors | Decline; use shop parts | Cheap parts with a high cost of failure |
| Valves, PRVs, expansion tanks | Usually decline | Pressure and safety components |
| Water heaters and gas appliances | Decline or case by case | Safety, venting, code and permit implications |
| Pipe and fittings inside walls | Decline | Hidden work where failure causes the largest damage |
Write your version down and make sure the office, the techs and the website say the same thing. Inconsistency is what customers remember.
Labor-only terms that protect both sides
When you accept a customer’s part, change the terms of the job explicitly. The customer gets a fair price for installation and a clear warranty on your work; you avoid carrying the risk of a part you did not choose.
- Workmanship warranty covers the installation only: connections, mounting and the work you did, for your normal period.
- No warranty on the part. Defects are between the customer and the seller or manufacturer.
- If the part is defective, incomplete or incompatible, a return visit is charged at your standard rate.
- If additional parts are needed to complete the job, they are supplied by the shop at normal prices.
- The tech inspects the part before starting and may decline it if it is unsafe, damaged or unsuitable.
- The customer handles returns or warranty claims with the seller.
Example policy wording (adapt with your own counsel): We are happy to install fixtures you have purchased. For customer-supplied parts, our workmanship warranty covers our installation for the standard period; the part itself is covered only by its manufacturer or seller. Before we begin, we will inspect the part. If it is damaged, incomplete, unsuitable for your plumbing or not approved for drinking water use, we may recommend a replacement. Return visits caused by a defective or incorrect customer-supplied part are charged at our standard rate.
Check the part before any work starts
Ask at booking
The office asks whether the customer is supplying anything, records the brand and model, and sends the policy by text or email.
Open the box on arrival
The tech checks the part against the order, looks for damage and confirms that every component is present.
Check compatibility
Rough-in, connection sizes, valve type and mounting must suit the existing plumbing.
Check certification
For anything touching drinking water, confirm it is marked as compliant. Under the Safe Drinking Water Act, lead free means a weighted average of no more than 0.25% lead on wetted surfaces of pipes, fittings and fixtures, and no more than 0.2% in solder and flux[1].
Check ratings
Toilets and fixtures should meet current flow standards. The federal standard for toilets is 1.6 gallons per flush, and WaterSense models use 1.28 or less[2].
Sign before starting
The customer signs the labor-only terms on the work order. Photograph the part and its label for the job notes.
Source: U.S. Environmental Protection Agency, WaterSense, 2026[2]
Show the data
| Item | Value |
|---|---|
| Older inefficient toilets (up to) | 6 gallons per flush |
| Federal standard | 1.6 gallons per flush |
| WaterSense labeled | 1.28 gallons per flush |
Older fixtures, salvage pieces and some unusual imports may not meet these standards. Older inefficient toilets can use as much as 6 gallons per flush[2]. If a part fails the check, the tech explains why and offers a shop-supplied alternative.
Pricing labor-only work
When the customer supplies the part, the job loses its material margin, but the cost of the visit does not change. Truck, travel, insurance, office time and warranty exposure are all still there. That is why many shops do not simply quote the labor portion of the normal task price.
- Use a labor-only price for each accepted task in the price book so quotes are consistent.
- Include inspection and any extra handling time in that price.
- Do not discount labor to compete with the online part saving.
- Charge return visits for defective customer parts at the standard rate, as the policy states.
Explain it without defensiveness: the customer saves on the part and pays for the installation and the warranty on your work. The material markup guide explains what the material margin normally covers, which helps techs answer the question honestly.
Scripts for the office and the tech
- Phone: “Yes, we can install a faucet you’ve bought. We install customer parts on a labor-only basis, which means our warranty covers our work and the faucet is covered by the manufacturer. Could you tell me the brand and model so the tech can check it fits? I’ll text you our terms.”
- Declining a category: “For valves and supply lines we use our own parts, because if one fails it can flood the house. We can install your new faucet and supply the lines and valves we warranty.”
- At the door, part fails inspection: “This toilet is missing the tank bolts and the flange it needs. I can finish today with our parts, or you can return it and we’ll rebook. Which works better?”
- After a failure: “Our installation is covered, so I’ll check that first. If the part itself has failed, the manufacturer handles it, and I can help you with the model details for the claim.”
When to say no
Even with a written policy, techs need permission to decline. Give them clear grounds so the decision is about safety and quality, not mood or price.
- The part is damaged, used, incomplete or not the model the customer described at booking.
- It is not marked as approved for drinking water where that matters.
- It does not suit the existing plumbing without modifications the customer has not agreed to.
- It is a pressure, gas or safety component the policy excludes.
- Installing it would require work outside the scope and price agreed.
Declining politely, with a ready alternative and the option to rebook, keeps the customer. Forcing an unsuitable part into place to avoid an awkward moment is how callbacks and bad reviews start.
Damage, liability and paperwork
The biggest exposure with customer parts is water damage. The average homeowners claim for water damage and freezing was $15,400 over 2019 to 2023[4]. If a customer-supplied part fails and floods a room, the question of who is responsible will be decided by what was agreed and documented, so the signed terms and the photos in the job record matter.
Most states and some localities require plumbers to be licensed[5], and your license and insurance stand behind the installation either way. Ask your insurance agent how your policy treats customer-supplied components, and keep the policy wording consistent across the estimate, the work order and the invoice. For the warranty language itself, see workmanship warranty terms, and for how price changes interact with parts sourcing, see updating prices when material costs jump.
Frequently asked questions
Do plumbers have to install parts customers buy?
No. It is a business decision. Many plumbers accept finished fixtures on labor-only terms and decline components such as valves, supply lines and water heaters where failure is more costly or code and safety matter more.
Does a plumber's warranty cover customer-supplied parts?
Usually only the installation. The part is covered by its manufacturer or seller. State this in writing before the work starts.
Should labor-only installation cost less?
Less in total than a job with shop-supplied parts, but not simply the labor portion of the normal price. The visit still carries travel, overhead and warranty exposure, and inspection takes time.
References
U.S. Environmental Protection Agency (2026). Use of Lead Free Pipes, Fittings, Fixtures, Solder and Flux for Drinking Water (opens in a new tab) ↑
U.S. Environmental Protection Agency, WaterSense (2026). Residential Toilets (opens in a new tab) ↑
Pew Research Center (2016). Online Reviews (Online Shopping and E-Commerce) (opens in a new tab) ↑
Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑