Key takeaways
- A billable labor rate is the price of one hour a customer pays for, so it must carry the unpaid hours, burden, overhead and profit behind it.
- Benefits were 30.0% of private-industry compensation cost in June 2026[1]; wage alone understates what an hour costs.
- The biggest error is dividing by paid hours instead of billable hours. Count holidays, training, drive and callbacks honestly.
- Price from cost using margin, not markup: price equals cost divided by one minus the target margin.
- Recalculate after every wage review; average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[2].
Why wage is only the starting point
Many owners set their hourly rate by looking at a competitor’s ad or by doubling what they pay a tech. Both methods miss what an hour actually costs. The median hourly pay for plumbers, pipefitters and steamfitters was $30.67 in 2025[3], but the shop pays far more than that for each hour a customer is billed: payroll taxes and benefits, paid hours that nobody bills, the office and trucks that make the work possible, and the profit that keeps the business alive.
The calculation below walks through each layer with a fictional example. Replace every example figure with your own payroll and accounting numbers. The structure is what matters.
Layer 1: the burdened cost of a paid hour
Start with what you pay the tech per hour, then add everything the employer pays on top: payroll taxes, workers’ compensation, health insurance, retirement contributions, paid leave and bonuses. BLS employer cost data shows how large this layer is. In June 2026, private-industry employers paid an average $46.89 per hour worked in total compensation, of which wages were 70.0% and benefits 30.0%, or $14.07 an hour[1].
- Wages and salaries 70%
- Benefits 30%
Source: U.S. Bureau of Labor Statistics, 2026[1]
Show the data
| Item | Value |
|---|---|
| Wages and salaries | 70% |
| Benefits | 30% |
Put another way, benefits added about 43% on top of wages in that average, calculated as $14.07 divided by the wage portion[1]. Your own figure depends on your state, your workers’ compensation class, your health plan and whether you pay union benefits. Get the real number from your payroll provider and insurance invoices for the past twelve months.
Example (fictional): a service tech earns $34 an hour, or $70,720 for 2,080 paid hours. Payroll taxes, workers’ compensation, health insurance, retirement match, uniforms and the bonus program add 35%, or $24,752. Annual burdened labor cost: $95,472.
Layer 2: billable hours, honestly counted
This is where most rates go wrong. A full-time tech is paid for roughly forty hours a week all year, but customers are billed for far fewer of those hours. Subtract every paid hour that does not end up on an invoice.
| Paid hours that are not billed | How to estimate |
|---|---|
| Paid time off and holidays | From your policy and last year’s payroll |
| Training and meetings | Scheduled training days, weekly meetings, ride-alongs as trainer |
| Drive time not charged | From the scheduling system, if trip fees do not cover it |
| Callbacks and warranty work | Recall hours from job records |
| Shop, stock and vehicle time | Restocking, supply-house runs, vehicle care |
| Slow periods | Hours paid with no job booked, from the slowest months |
Example (fictional): 2,080 paid hours, minus 80 hours of vacation, 56 hours of holidays and 40 hours of training, leaves 1,904 available hours. Drive time not charged, callbacks, shop time and quiet days take another 25%, leaving about 1,428 billable hours. The shop rounds down to 1,400 to stay conservative.
Divide the burdened labor cost by billable hours, not paid hours. In the example, $95,472 divided by 1,400 is about $68.19 of labor cost per billable hour. Dividing by 2,080 would suggest $45.90, a third less, and every price built on it would be too low.
Layer 3: overhead per billable hour
Overhead is everything the business spends that is not field labor or job materials: office staff, rent, trucks, fuel, insurance, software, phones, marketing, accounting, tools and equipment. Add it up for the year and divide by the total billable hours of all field techs. The overhead per billable hour guide shows how to build that number and the costs owners most often forget.
Example (fictional): the shop has five techs at about 1,400 billable hours each, or 7,000 billable hours. Annual overhead is $504,000. Overhead per billable hour: $72. Labor plus overhead per billable hour: $68.19 plus $72, or $140.19.
Layer 4: profit, using margin
Profit is not optional. It pays for growth, slow seasons, equipment and the owner’s risk. Decide a target net margin, then convert cost to price with the margin formula: price equals cost divided by one minus the margin. Do not simply add the margin percentage to cost, which is a markup and produces less profit than intended.
Example (fictional): with a 15% target net margin, price equals $140.19 divided by 0.85, or about $164.93. The shop sets its billable labor rate at $165 an hour. Adding 15% to cost instead would give $161.22, and the shop would earn a margin of about 13%, not 15%.
The difference looks small per hour and large per year. The markup vs margin guide has a conversion table so the same mistake does not creep into material pricing.
The whole calculation in order
Annual wages per tech
Hourly wage multiplied by paid hours, plus overtime typical for your shop.
Add burden
Payroll taxes, workers’ compensation, benefits, paid leave and bonuses, from real invoices.
Count billable hours
Paid hours minus time off, training, unbilled drive, callbacks, shop time and slow periods.
Labor cost per billable hour
Burdened annual cost divided by billable hours.
Add overhead per billable hour
Annual overhead divided by total field billable hours.
Apply target margin
Labor plus overhead, divided by one minus the target net margin.
Sense-check
Compare with your current rate, your local market and your financial statements. If the result is far above what customers will pay, work on billable hours and overhead before cutting margin.
Different rates for different techs?
Some shops calculate one blended rate; others calculate by tech level. A blended rate is simpler and works well with flat-rate pricing, where the task price matters more than who does it. Separate rates can make sense for time and materials work or for crews where an apprentice’s time is billed differently. Either way, use your actual mix of techs and wages.
Payroll per employee also gives a quick check. Average annual payroll per employee at plumbing, heating and AC contractors was about $73,700 in 2023 across all staff[4]. If your burdened field cost per tech is far below that, check whether some costs are missing from your numbers.
Overtime, after-hours and emergency rates
The rate above covers normal working hours. Overtime and on-call work cost more: time-and-a-half or on-call pay, more wear on the tech and often a slower, lone-worker job at night. Calculate the after-hours rate the same way, starting from the actual hourly cost of overtime or on-call pay, and add the premium your market supports. Write the after-hours policy in a sentence the office can say on the phone, and see setting after-hours emergency fees for the customer-facing side.
Mistakes that keep rates too low
- Dividing by paid hours instead of billable hours.
- Leaving out the owner’s salary, so the rate only works if the owner works for free.
- Using last year’s wages and insurance costs after a raise or renewal.
- Counting drive time as billable when trip fees do not actually cover it.
- Adding profit as a markup instead of using the margin formula.
- Matching a competitor’s rate without knowing their costs or what their rate includes.
Any one of these can take several dollars off every billed hour. Together they explain why busy shops sometimes end the year with little to show for it.
When to recalculate
- After annual wage reviews or any change in pay structure.
- When insurance, workers’ compensation or health plan costs renew.
- When billable hours change: a new tech still in training, a new service area with longer drives, or better routing.
- When overhead changes: a new office hire, more trucks, a new software system.
- At least yearly, even if nothing seems to have changed.
Labor cost has been rising across the trade. Average hourly earnings for all employees at plumbing, heating and AC contractors were $42.38 in September 2026, up from $40.59 a year earlier[2]. A rate set two years ago is very likely below cost today. Feed the new rate straight into the price book so task prices move with it.
Frequently asked questions
What is a billable labor rate in plumbing?
It is the price charged for one hour of billed work. It must cover the tech's wage and payroll burden, the paid hours that are never billed, the company's overhead and a profit margin.
Why is my billable rate so much higher than my techs' wage?
Because each billed hour carries benefits and payroll taxes, unbilled hours such as training and drive time, and a share of office, vehicle, insurance and other overhead, plus profit. Dividing by billable hours rather than paid hours is what makes the difference visible.
Should I use markup or margin to add profit?
Use margin. Divide cost by one minus the target margin. Adding the percentage to cost is a markup and yields a smaller margin than intended.
References
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) ↑
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) ↑