Key takeaways
- Overhead per billable hour equals total annual overhead divided by the billable hours your field techs actually produce.
- The usual misses are the owner’s own salary, vehicle replacement, warranty callbacks, card fees and software creep.
- Office roles are real overhead: the median dispatcher wage was $50,340 in 2025[1] and the median receptionist wage $38,010[2].
- Check the result against the industry’s shape: payroll was about 27% of receipts at plumbing, heating and AC contractors in 2022[3].
- Lower overhead per hour by raising billable hours as well as by cutting costs.
What overhead means here
Every dollar a plumbing business spends falls into one of two buckets. Direct costs belong to a specific job: the tech’s time on that job and the parts installed. Overhead is everything else that keeps the business able to do jobs at all: the office, the trucks, insurance, software, marketing, tools, the owner’s management time and the hours techs are paid but not billing.
Overhead does not show up on any single invoice, which is why it is so often under-recovered. The fix is to turn it into a number per billable hour and build that number into every price. The same figure feeds the billable labor rate and the price book.
The formula
Total the year’s overhead
Use last year’s profit and loss statement, adjusted for known changes this year. Include every cost that is not field labor on jobs or job materials.
Count field billable hours
Add up the hours your techs actually billed last year, or estimate them per tech after time off, training, unbilled drive and callbacks.
Divide
Overhead per billable hour equals total overhead divided by total billable hours.
Add it to labor cost
Labor cost per billable hour plus overhead per billable hour is your break-even cost per hour, before profit.
Repeat each year
Recalculate at least annually and whenever a big cost or headcount change happens.
Overhead categories and what hides in them
| Category | Typical lines | Often forgotten |
|---|---|---|
| Office and admin staff | Dispatch, customer service, bookkeeping, management | Their payroll taxes and benefits |
| Owner | Salary at a market rate for the role | Owners who pay themselves only from profit |
| Vehicles | Payments or leases, fuel, insurance, maintenance | Replacement fund for trucks you own outright |
| Facility | Rent, utilities, storage, shop equipment | Yard or storage unit for stock and spoils |
| Insurance and licensing | General liability, auto, bonding, licenses | Continuing education and renewal time |
| Tools and equipment | Cameras, jetters, locators, power tools | Repair and replacement of expensive equipment |
| Technology | Scheduling, phones, accounting, price book software | Small subscriptions that add up |
| Marketing | Website, ads, directories, vehicle wraps | Agency retainers and review platforms |
| Financial | Accounting, legal, bank fees | Card processing fees, bad debt, financing fees |
| Field non-billable | Warranty callbacks, training time, unbilled drive | Recall labor that never appears as overhead |
The costs owners forget
The table is a starting point. These are the items that most often go missing when owners first calculate overhead, and each one quietly lowers the real margin on every job.
- The owner’s salary. If you run the business, your management time is a cost. Use what you would pay someone else to do your job, and keep profit separate.
- Vehicle replacement. A paid-off truck still wears out. Set aside a yearly amount for each vehicle based on its remaining life and replacement cost.
- Warranty and callback labor. Free return visits are paid time that appears nowhere on invoices.
- Card processing and financing fees. They scale with revenue and are easy to overlook in the budget.
- Office benefits. Payroll taxes, insurance and paid leave for office staff belong in overhead, not just their wages.
- Training. Classroom hours, ride-along time as a trainer and certification costs.
- Software creep. Count every subscription, including the ones billed to a personal card.
- Bad debt. Unpaid invoices are a cost of doing business.
Benefits are a large share of labor cost everywhere: 30.0% of private-industry employer compensation costs in June 2026[4]. Leaving them out for office staff is one of the most common reasons overhead looks lower than it is.
Worked example
The fictional shop below has five field techs and a small office. Every figure is an example to show the method, not a benchmark.
| Overhead line (Example) | Annual amount |
|---|---|
| Office staff: dispatcher, customer service, bookkeeper, with burden | $190,000 |
| Owner salary at market rate for the role | $110,000 |
| Vehicles: payments, fuel, insurance, maintenance, replacement fund | $85,000 |
| Facility and utilities | $36,000 |
| Insurance, bonding and licenses | $28,000 |
| Tools and equipment repair and replacement | $15,000 |
| Software, phones and IT | $14,000 |
| Marketing | $42,000 |
| Accounting, legal, bank and card fees, bad debt | $26,000 |
| Warranty callbacks and training time | $18,000 |
| Total | $564,000 |
Example (fictional): five techs each bill about 1,400 hours a year, for 7,000 billable hours. Overhead per billable hour equals $564,000 divided by 7,000, or about $80.57. If the shop had divided by 10,400 paid hours instead, it would have recovered only $54.23 per hour and fallen short by more than $180,000 over the year.
That shortfall is the reason the denominator matters as much as the total. Billable hours are the only hours customers pay for, so they must carry the whole overhead load.
Checking the result against industry figures
Industry data cannot give you your number, but it can tell you if something is badly off. In 2022, plumbing, heating and AC contractors had receipts of about $260,000 per employee, and payroll equalled about 26.9% of receipts[3]. Average annual payroll per employee was about $73,700 in 2023[5].
- Payroll 26.9%
- Everything else 73.1%
Source: U.S. Census Bureau, 2022[3]
Show the data
| Item | Value |
|---|---|
| Payroll | 26.9% |
| Everything else | 73.1% |
Use these figures as a rough cross-check. If your prices imply payroll eats half of every ticket, your overhead and margin are probably not being recovered. If your revenue per employee is far below the industry figure, look at billable hours and pricing before blaming overhead alone. Remember that the industry figures mix plumbing with HVAC and cover businesses of every size.
Office roles in the overhead line
Office staff are usually the largest overhead line after vehicles. O*NET reports a median dispatcher wage of $50,340 a year in 2025[1], and BLS reports a median receptionist wage of $38,010[2], before benefits. These roles make billable hours possible, so the question is not whether to have them but whether each one produces enough booked, well-prepared work to justify its share of the hourly rate.
Track how many billable hours each office role supports. When call volume rises, adding coverage is often cheaper per billable hour than losing booked work. When it falls, cross-training and shared duties keep the overhead line steady.
Service work, installs and projects
Some shops apply one overhead figure to every billable hour. That is simple and usually good enough for a service-focused business. Shops that also do large installs, repipes or new construction may find that a single figure distorts prices, because project work often uses less office time and marketing per hour than service calls do.
If your work mix is broad, consider two overhead rates. Assign marketing, customer service and dispatch mainly to service hours, where they are used, and share facility, insurance, vehicles and management across all hours. The method does not need to be precise; it needs to be reasonable, written down and applied the same way every year.
Whatever method you choose, keep the total the same. Splitting overhead changes where it is recovered, not how much has to be recovered.
When to recalculate
- Every year with the budget, using the latest profit and loss statement.
- When you add or lose a tech, because billable hours change overnight.
- When a major cost changes: a new office hire, a move, a fleet purchase, an insurance renewal.
- When billable hours shift because of new routing, a new service area or a training program.
Example (fictional): the five-tech shop above hires a sixth tech, which adds about 1,400 billable hours, plus a truck, tools and some extra office load that together raise overhead by $70,000. Overhead per billable hour moves from about $80.57 to $634,000 divided by 8,400, or about $75.48. The new tech lowers overhead per hour, but only once they are fully billable; during training months the figure goes up, not down.
Lowering overhead per hour
There are two levers, and the second is often the bigger one.
- Reduce the total: cancel unused software, renegotiate insurance at renewal, cut marketing channels that do not book jobs, and plan vehicle purchases instead of reacting to breakdowns.
- Raise billable hours: tighter routing, fewer return trips for parts, faster booking of callers, better van stock and fewer unbilled callbacks. Every extra billable hour spreads the same overhead thinner.
- Add capacity carefully: a new tech adds billable hours, but also a truck, tools and some office load. Recalculate before and after.
- Watch growth costs: a new office hire or location changes overhead per hour overnight. Price for it before it starts.
Put the overhead calculation on the calendar alongside the yearly budget. Then feed the result into pricing, and check the margin with markup vs margin so the profit you intend is the profit you get.
Frequently asked questions
What is overhead per billable hour?
It is your total annual overhead divided by the hours your field techs bill to customers. Adding it to your labor cost per billable hour gives your break-even cost before profit.
Should the owner's salary be part of overhead?
Yes. Include a market-rate salary for the role the owner performs, and keep profit separate. Otherwise prices only cover the business if the owner works for free.
Why divide by billable hours instead of paid hours?
Because customers only pay for billable hours. Dividing by paid hours makes overhead per hour look smaller and leaves part of it unrecovered.
References
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 43-5032.00 - Dispatchers, Except Police, Fire, and Ambulance (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Receptionists (opens in a new tab) ↑
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) ↑
U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) ↑