Pricing estimates

Flat rate vs time and materials for plumbing

Flat rate or time and materials? Decision criteria by plumbing job type, a worked example, the hybrid model most shops use and scripts for explaining it.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Two ways to put a price on plumbing work
  2. Side by side
  3. Why the wage spread matters
  4. Decision criteria by job type
  5. A worked example
  6. The hybrid model most shops land on
  7. Explaining it to customers
  8. A 60-day switch from hourly to flat rate
  9. Mistakes to avoid
  10. Frequently asked questions
  11. References
Pricing estimates: Flat rate vs time and materials for plumbingArticle coverPRICING ESTIMATESFlat rate vs time andmaterials for plumbingAva for PlumbersInsightsPricing estimates: Flat rate vs time and materials for plumbingArticle coverPRICING ESTIMATESFlat rate vs time andmaterials forplumbingAva for Plumbers

Key takeaways

  • Flat rate prices the task; time and materials prices the hours. Each fits different jobs, and most shops end up using both.
  • Under time and materials, the bill depends on who shows up: plumber hourly wages range from $21.22 at the 10th percentile to $52.13 at the 90th[1].
  • Use flat rate for repeatable repairs, and time and materials with a written not-to-exceed figure for open-ended work.
  • Whichever you choose, labor cost moves: average hourly earnings at plumbing, heating and AC contractors rose about 4.4% in the year to September 2026[2].
  • Explain the model before the work starts, in one sentence, and put it on the estimate.

Two ways to put a price on plumbing work

Time and materials (T&M) charges the customer for the hours worked at an hourly rate, plus the parts used with a markup. The customer carries the risk that the job takes longer; the shop carries little. Flat rate, sometimes called upfront pricing, sets a price per task before the work begins, drawn from a price book that already includes typical labor, materials, overhead and profit. The shop carries the risk that the job runs long; the customer knows the price before saying yes.

Preparing cost estimates is one of the core duties BLS lists for plumbers[3], and how you price shapes that conversation more than any other choice. Neither model is more honest than the other. Both can be done well or badly. The question is which one fits which job, and how clearly you explain it.

Side by side

How flat rate and time and materials compare
FactorFlat rateTime and materials
Price known before workYesOnly an estimate or a cap
Who carries the risk of overrunsThe shopThe customer
Reward for fast, skilled techsHigher margin per taskFewer billable hours
Setup effortPrice book with task timesAn hourly rate and a materials markup
Fit for unknown scopePoor unless tasks are well definedGood, with a not-to-exceed figure
Customer argumentsAbout the price of a short jobAbout the hours on the invoice
Price updatesWhole book when costs changeOne rate and the markup

The table shows why so many shops are hybrids. Flat rate is better on the jobs you do every week; T&M is safer on the jobs you cannot see into.

Why the wage spread matters

Under T&M, a customer pays for hours, so the bill depends heavily on the tech’s speed and experience. O*NET reports plumber hourly wages from $21.22 at the lowest 10% to $52.13 at the highest 10%, with a median of $30.67[1]. If a shop charges one hourly rate for everyone, the customer whose job goes to the newest apprentice may pay for more hours than the customer who gets the fastest senior tech, for the same result.

Hourly wages for plumbers, pipefitters and steamfitters, 2025
Hourly wages for plumbers, pipefitters and steamfitters, 2025Bar chart. Lowest 10%: $21.22; Median: $30.67; Highest 10%: $52.13.Lowest 10%Lowest 10%: $21.22$21.22MedianMedian: $30.67$30.67Highest 10%Highest 10%: $52.13$52.13Hourly wages for plumbers, pipefitters and steamfitters, 2025Bar chart. Lowest 10%: $21.22; Median: $30.67; Highest 10%: $52.13.Lowest 10%Lowest 10%: $21.22$21.22MedianMedian: $30.67$30.67Highest 10%Highest 10%: $52.13$52.13

Source: O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data, 2025[1]

Show the data
ItemValue
Lowest 10%$21.22
Median$30.67
Highest 10%$52.13

Flat rate breaks that link. The price reflects the task, and the shop’s average time for it. Fast techs earn the shop more margin, slow techs earn less, and the customer pays the same either way. That is the main fairness argument for flat rate, and also why it rewards training: every minute saved on a repeatable task is margin.

Labor cost is rising in both models. Average hourly earnings for all employees at plumbing, heating and AC contractors were $42.38 in September 2026, up from $40.59 a year earlier[2], and benefits made up 30.0% of private-industry compensation cost in June 2026[4]. Payroll alone equalled about 27% of receipts for plumbing, heating and AC contractors in 2022[5]. A T&M rate that has not been reviewed this year is probably too low; so is a price book built on last year’s labor figures.

Decision criteria by job type

Sort your job list into three groups. The groups, not ideology, decide the model.

  • Repeatable repairs with predictable time: toilet rebuilds, faucet and valve replacements, water heater swaps, disposal installs, standard drain clearing. Flat rate works well because you have data on how long they take.
  • Diagnosis-first work: leaks you cannot see, intermittent problems, low pressure. Charge a flat diagnostic or trip fee, then price the repair as a flat-rate task once the cause is known.
  • Open-ended or hidden-condition work: old-house remodels, slab leak reroutes where the path is unknown, jobs needing extensive wall access. Use T&M with a written not-to-exceed figure and a rule that you stop and call before passing it.
  • Large projects: repipes, sewer replacements and new construction usually get a written fixed-price bid with clear exclusions and allowances, which is a project version of flat rate.
  • Contract and commercial work: follow what the contract specifies, often T&M at agreed rates or unit pricing.

A worked example

Example (fictional numbers): a shop’s fully burdened billable rate is $165 an hour and a 40-gallon water heater swap uses $900 of materials at the shop’s markup. Under T&M, a senior tech who finishes in 2.5 hours produces a bill of $1,312.50; an apprentice-led crew taking 3.5 hours produces $1,477.50 for the same result. Under flat rate, the price book sets the task at $1,400 based on the shop’s average of 3 hours. The customer pays $1,400 either way; the shop earns more on the fast crew and less on the slow one.

The example shows the trade-off clearly. Flat rate gives the customer one number and gives the shop a reason to train and equip techs well. T&M is simpler to set up but leaves the customer exposed to the clock and the shop exposed to arguments about hours.

The hybrid model most shops land on

  1. Flat-rate the top tasks

    Start with the 30 to 50 tasks that make up most of your service tickets. Build their prices carefully from labor, materials, overhead and margin.

  2. Charge for diagnosis

    Use a flat diagnostic or trip fee for the first visit, credited or not according to a published policy.

  3. Use T&M with a cap for unknowns

    Write the hourly rate, the materials markup and a not-to-exceed figure. Stop and get approval before exceeding it.

  4. Bid the projects

    Give fixed written bids for repipes, sewer replacements and other large jobs, with allowances for unknown conditions spelled out.

  5. Review quarterly

    Compare actual times on flat-rate tasks with the book. Re-price any task where actual time drifts well above the assumption.

The steps for building the book itself are in how to build a plumbing price book, and the hourly figure underneath both models is covered in how to calculate your billable labor rate.

Explaining it to customers

Customers rarely object to the model; they object to surprises. Say which model applies before the work starts and put it in writing.

  • Flat rate: “We price by the job, not the hour. This is the price for the repair, including parts and labor, and it won’t change if it takes us longer than expected.”
  • When a flat-rate job is quick: “The price covers the skill, the parts, the truck and the warranty, not just the minutes we’re here. If it had taken twice as long, the price would be the same.”
  • T&M with a cap: “Because we can’t see inside the wall yet, we charge for the time and parts used, and we won’t go past this figure without stopping to talk to you first.”

Price-shopping callers ask for an hourly rate because it is the only number they know to compare. Explain the model and offer a range for the common job instead; see handling price shopper calls.

A 60-day switch from hourly to flat rate

  1. Weeks 1 to 2: data

    Pull a year of invoices, list the most common tasks and their actual times, and recalculate your billable rate.

  2. Weeks 3 to 4: prices

    Price the top tasks, write their definitions and re-price thirty past jobs to check the results against what you earned.

  3. Weeks 5 to 6: training

    Role-play the price conversation with each tech, including the quick-job objection, until everyone uses the same words.

  4. Week 7: soft launch

    Use flat rate for the top tasks only, keep T&M with a cap for everything else, and log every question customers ask.

  5. Week 8 onward: review

    Compare actual times with the book weekly for a month, fix outliers and add the next batch of tasks.

Tell the office before you tell customers. Callers will ask about the change, and the office needs a clear one-line answer from day one.

Mistakes to avoid

  1. Building flat-rate prices from guesses instead of your own job times.
  2. Never updating the book after labor and material costs rise.
  3. Using flat rate on open-ended jobs, then absorbing the overruns or arguing about change orders.
  4. Running T&M without a cap, so the customer learns the price only at the end.
  5. Different techs explaining the model differently. Give them the same short script.

Margin math errors make every model fail. If your markup and margin numbers feel off, check markup vs margin before re-pricing anything.

Frequently asked questions

Is flat-rate pricing more expensive for customers?

Not necessarily. A well-built flat rate is based on the shop's average time for a task, so some customers pay less than they would under time and materials and some pay more. The difference is that the price is known before the work starts.

Can a plumbing company use both flat rate and time and materials?

Yes, and most do. Flat rate suits repeatable repairs, while time and materials with a written cap suits work with hidden or unknown conditions.

How do I switch from time and materials to flat rate?

Start with your most common 30 to 50 tasks, time them from your own job history, price them from your labor rate, materials and margin, and train techs on the script before launch. Add tasks gradually.

References

  1. O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  2. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) ↑

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  4. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) ↑

  5. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo