Sales memberships

Talking to homeowners about lead service lines

What plumbers can tell homeowners about lead service lines: EPA facts, who owns which part, what utility programs must do and how to work alongside them.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why homeowners are asking now
  2. Facts you can state with confidence
  3. Who owns which part of the line
  4. What the utility program must do
  5. Why partial replacements are restricted
  6. Checking a line on a service call
  7. How the conversation should sound
  8. Working with the utility program
  9. Inside the house
  10. Keeping it honest
  11. Example: a letter from the utility
  12. Frequently asked questions
  13. References
Sales memberships: Talking to homeowners about lead service linesArticle coverSALES MEMBERSHIPSTalking to homeownersabout lead servicelinesAva for PlumbersInsightsSales memberships: Talking to homeowners about lead service linesArticle coverSALES MEMBERSHIPSTalking to homeownersabout lead servicelinesAva for Plumbers

Key takeaways

  • EPA says there is no safe level of lead exposure[1] and estimates about four million lead service lines remain in the US[2].
  • Under EPA's 2024 rule, water systems must fully replace lead and certain galvanized lines under their control within 10 years[3].
  • A line counts as fully replaced only when both the customer side and the system side are non-lead[3], so coordinate with the utility.
  • Start every conversation with the utility's records; EPA suggests asking the utility first and a licensed plumber where records are missing[1].

Why homeowners are asking now

EPA's Lead and Copper Rule Improvements, issued on October 8, 2024, require drinking water systems to identify and replace lead pipes within 10 years[4]. Utilities are building service line inventories, sending letters to customers whose lines are lead or of unknown material, and planning replacement programs. Those letters lead to phone calls, and many of the calls go to plumbers.

Homeowners usually want three answers: do I have a lead line, who pays to replace it, and what should I do in the meantime. Plumbers who can answer clearly, and who work with the utility program rather than around it, earn trust and good work. Plumbers who use the letters to frighten people do lasting damage to the trade's reputation.

Facts you can state with confidence

  • EPA's maximum contaminant level goal for lead in drinking water is zero, and EPA says there is no safe level of exposure to lead[1].
  • Lead pipes are more likely to be found in older cities and in homes built before 1986[1].
  • EPA's latest infrastructure needs survey estimates a total of four million lead service lines in the US[2].
  • New plumbing must be lead free, defined as a weighted average of no more than 0.25% lead across wetted surfaces of pipes, fittings and fixtures, and 0.2% for solder and flux[5].
  • To find out whether a home has a lead service line, EPA suggests asking the water utility, and says a licensed plumber may be able to help where the utility has no information[1].

Stick to these and to what you can see at the property. Do not tell a homeowner their water contains lead unless a certified laboratory test shows it, and do not guess at the material of a line you have not seen.

Who owns which part of the line

A service line runs from the water main to the house. Property owners often own part of it, which EPA's rule recognizes when it refers to customers paying for the portion of the line they own[3]; where the boundary falls depends on the utility and local rules. EPA's rule sidesteps ownership in one important way: a lead or galvanized-requiring-replacement line counts as fully replaced only when the entire length, both the customer side and the system side, is non-lead[3].

Utilities must replace lines under their control, which EPA defines as wherever the system has access, legal or physical, to conduct full replacement[3]. Where access requires the owner's consent, the system must make a reasonable effort to get it: at least four attempts using at least two methods, such as letters, calls, texts or door hangers[3]. A utility's replacement plan must also include a strategy for customers who cannot pay to replace the portion of the line they own[3]. That is the conversation homeowners most need help with.

What the utility program must do

Key requirements of EPA's Lead and Copper Rule Improvements for service lines
Requirement under EPA's ruleWhat it means for the homeowner
Inventory every service line, regardless of ownership, as lead, non-lead, galvanized requiring replacement or unknownThe utility should be able to tell them how their line is classified
Submit a replacement plan by November 1, 2027Programs, schedules and funding details are being set now
Fully replace lead and GRR lines under its control within 10 yearsReplacement is coming, though timing varies by system
Make a reasonable effort to get owner consent where neededOwners will be contacted repeatedly; saying yes keeps them in the program
Offer full replacement to new owners within 6 months of a saleBuyers of older homes should expect an offer
Avoid partial replacements except in emergencies or planned infrastructure workUtilities should not leave a lead section on the customer side

These requirements come from EPA's technical fact sheet on the rule[3]. Individual states and utilities may set shorter deadlines, and some systems qualify for deferred ones, so always check the local program before quoting.

Minimum share of lead and GRR lines replaced at a 10% average annual rateIllustration of EPA's cumulative 10% average annual replacement rate, first assessed at the end of program year 3 (December 31, 2030); deferred or shortened deadlines apply to some systems.
Minimum share of lead and GRR lines replaced at a 10% average annual rateColumn chart. Program year 3: 30%; Program year 5: 50%; Program year 10: 100%.0%25%50%75%100%Program year 3: 30%30%Program year 3Program year 5: 50%50%Program year 5Program year 10: 100%100%Program year 10Minimum share of lead and GRR lines replaced at a 10% average annual rateColumn chart. Program year 3: 30%; Program year 5: 50%; Program year 10: 100%.0%25%50%75%100%Program year 3: 30%30%Programyear 3Program year 5: 50%50%Programyear 5Program year 10: 100%100%Programyear 10

Source: U.S. Environmental Protection Agency, 2024[3]

Show the data
ItemValue
Program year 330%
Program year 550%
Program year 10100%

Why partial replacements are restricted

Replacing only one side of a lead line leaves lead in service, and the work itself can disturb the remaining pipe. EPA's rule prohibits partial replacements unless they are part of an emergency repair or coordinated with planned infrastructure work such as a main or meter replacement[3]. For a plumber, the practical lesson is simple: do not replace the customer side of a lead line on your own and walk away. Coordinate with the utility so both sides are done, or so the customer knows exactly when the utility will do its part.

Checking a line on a service call

  1. Ask about the letter

    Has the utility contacted them about their service line, and how is it classified? Ask to see the letter.

  2. Look where the line enters

    Inspect the pipe where it comes through the foundation or floor to the meter or main shutoff, and photograph it.

  3. Identify carefully

    Use EPA's Protect Your Tap guide and your training to identify the material. If you are not certain, say so.

  4. Report to the customer

    Tell them what you saw, how sure you are and that the utility may want the information for its inventory.

  5. Point to next steps

    The utility program, a certified lab test if they want one and a filter certified to remove lead in the meantime if lead is suspected[1].

How the conversation should sound

β€œThe pipe coming in here looks like it could be lead, but I'd want to confirm. The water utility is required to replace lead lines under its control, and they should know how yours is listed. Here's their number. If it is lead, they'll usually need you to agree to work on your side. Until then, a filter certified to remove lead is a sensible step, and a lab test would tell you what's actually in your water.”

That script does several things: it reports what the technician saw, admits uncertainty, points the homeowner to the utility, explains consent and suggests reasonable interim steps. It does not sell anything, and that is exactly why the homeowner will call back when work is needed.

Working with the utility program

  • Find out whether your local utility uses approved contractors for the customer side and how to qualify.
  • Learn the program's funding rules: some cover the customer side in full or in part, and many require approval before work starts.
  • Know the paperwork: permits, consent forms, material verification photos and inspection sign-offs.
  • Coordinate dates so the customer side and system side are replaced together.
  • Keep records of every line you see, by address and material, in case the utility asks for help with its inventory.

Inside the house

Replacing the service line does not end the lead question. Older interior plumbing can include lead solder, old brass fixtures and galvanized pipe that has collected lead over decades. EPA's rule classes galvanized service lines that are or were downstream of lead as requiring replacement[3], which is why homeowners often ask about galvanized pipe indoors too. Any new interior work must meet the lead-free definition[5]. For whole-house options, see selling whole-house repipes; for fixtures, fixture upgrades.

Keeping it honest

Lead is a subject where fear sells, and that is the reason to be careful. Never tell a family their children are being poisoned, never claim a line is lead without seeing it, and never imply that a homeowner must hire you instead of joining the utility's program. If the utility will replace the customer side at little or no cost, say so, even if it means you lose the job. Homeowners compare notes with neighbors, and a company that told one family the truth about a free program will get the calls from the rest of the street when private work is needed.

Write down what you saw and what you told the customer. If the utility later confirms a different material, your record shows you were clear about your level of certainty.

Example: a letter from the utility

Example (fictional): a homeowner in a 1940s house calls after receiving a letter saying her service line is of unknown material. During a scheduled faucet repair, the technician photographs the pipe at the meter, which appears to be lead, and tells her so with the caveat that the utility will confirm. He gives her the utility's program number and explains that full replacement needs both sides done. She calls the utility, signs the consent form and the program schedules the work. Because the shop is on the utility's approved contractor list, it does the customer side on the same day the utility crew replaces its portion. The technician also recommends a lab test and leaves information on certified filters.

Frequently asked questions

Who pays to replace a lead service line?

It depends on the utility and local rules. EPA requires utility replacement plans to include a strategy for customers who cannot pay to replace the portion they own[3], and many programs offer funding. Check the local program first.

Can a plumber replace just the homeowner's side of a lead line?

Avoid it unless coordinated with the utility. EPA's rule largely prohibits partial replacements, and a line counts as replaced only when both sides are non-lead[3].

How do I know if my home has a lead service line?

Ask your water utility, which is building an inventory. EPA says a licensed plumber may be able to help if the utility has no information[1].

What should a household do while waiting for replacement?

EPA advises using a filter certified to remove lead[1]. A certified laboratory test shows whether lead is present at the tap.

References

  1. U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) ↑

  2. U.S. Environmental Protection Agency (2025). EPA's 7th Drinking Water Infrastructure Needs Survey and Assessment (opens in a new tab) ↑

  3. U.S. Environmental Protection Agency (2024). EPA's Final Lead and Copper Rule Improvements: Service Line Inventory and Replacement Requirements (technical fact sheet) (opens in a new tab) ↑

  4. U.S. Environmental Protection Agency (2024). Lead and Copper Rule Improvements (opens in a new tab) ↑

  5. U.S. Environmental Protection Agency (2026). Use of Lead Free Pipes, Fittings, Fixtures, Solder and Flux for Drinking Water (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo