Sales memberships

Selling whole-house repipes to homeowners

How plumbers build the evidence for a whole-house repipe, explain pipe materials honestly, stage the job around the family and handle financing.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. A big decision deserves evidence
  2. Signs that point to a repipe
  3. Building the evidence file
  4. Explaining pipe materials honestly
  5. Galvanized pipe, lead and the health question
  6. Repipe or spot repair?
  7. Staging the job
  8. The financing conversation
  9. What goes in the proposal
  10. Who to talk to
  11. Example: from third leak to repipe
  12. Frequently asked questions
  13. References
Sales memberships: Selling whole-house repipes to homeownersArticle coverSALES MEMBERSHIPSSelling whole-houserepipes to homeownersAva for PlumbersInsightsSales memberships: Selling whole-house repipes to homeownersArticle coverSALES MEMBERSHIPSSelling whole-houserepipes to homeownersAva for Plumbers

Key takeaways

  • A repipe recommendation rests on evidence: repair history, pipe material, pressure and flow readings, photos and, where relevant, a water test.
  • EPA's lead rule treats galvanized lines that are or were downstream of lead as requiring replacement[1]; new work must meet the federal lead-free definition[2].
  • Staging is half the sale: customers want to know how many days without water, which walls get opened and who patches them.
  • A repipe sold in the home may fall under the FTC's Cooling-Off Rule[3]; build the cancellation notice into the paperwork.

A big decision deserves evidence

A whole-house repipe is one of the largest jobs a plumbing company sells to homeowners, and one of the most disruptive to live through. Customers rarely wake up wanting one. They arrive at it after the third pinhole leak, a ceiling stain, or a technician showing them corroded pipe cut out of a wall. That history is the strongest argument for the job, and it is also why the sale should never feel rushed.

The approach that works is the same as for any major recommendation: build an evidence file, explain the options including spot repair, show exactly how the job will run, and give the customer time. Customers who choose a repipe this way rarely regret it, and they talk about the experience to neighbors in similar houses.

Signs that point to a repipe

  • Repeated leaks in different places on the same piping material, rather than a single damaged section.
  • Low flow or pressure at several fixtures that cleaning aerators and checking the pressure-reducing valve does not fix.
  • Discolored water, especially rusty water on first draw, in a home with galvanized steel supply lines.
  • Pipe materials with a poor track record, such as old galvanized steel or older plastic supply pipe like polybutylene, found throughout the house.
  • Any lead pipe in the supply, or galvanized pipe that sits or sat downstream of a lead service line.
  • A planned renovation that will open walls anyway, which makes replacing the piping much less disruptive.

Chronic leaks are common enough to take seriously. EPA estimates 9% of homes have leaks that waste 50 gallons or more a day[4], and an average household's leaks can waste more than 9,300 gallons a year[4]. Most of those are fixtures, not pipes, which is a reminder to rule out the simple causes first.

Share of US homes with leaks wasting 50 gallons or more a dayEPA WaterSense estimate.
Share of US homes with leaks wasting 50 gallons or more a dayDonut chart. Homes with leaks of 50+ gallons a day: 9%.Homes with leaks of 50+ gallons a day: 9%9%
  • Homes with leaks of 50+ gallons a day 9%

Source: U.S. Environmental Protection Agency (WaterSense), 2026[4]

Show the data
ItemValue
Homes with leaks of 50+ gallons a day9%

Building the evidence file

  1. Repair history

    List every leak repair you or the customer know of, with dates, locations and photos. Patterns across the house are the core of the case.

  2. Material survey

    Identify pipe materials at the meter, the water heater, under sinks and in any accessible basement or crawl space. Photograph each.

  3. Pressure and flow

    Record static pressure and observe flow at the farthest fixtures with others running. Note any drop.

  4. Pipe sample

    With permission, cut out a short section during a repair and show the inside. Corrosion and scale inside galvanized pipe are persuasive and honest evidence.

  5. Water test where relevant

    If lead is possible, arrange a certified laboratory test rather than relying on assumptions.

  6. Write it up

    A two-page summary of findings with photos, before any price is discussed.

Explaining pipe materials honestly

Supply pipe materials and how to discuss them with homeowners
MaterialCommon concernsHow to talk about it
Galvanized steelInternal corrosion, reduced flow, rusty water; may have collected lead if downstream of a lead lineShow a cut section; explain flow loss and the lead question plainly
PolybutyleneOlder plastic supply pipe with a history of failures at fittings and pipeIdentify it carefully and explain why many owners replace it proactively
CopperUsually long-lived; pinhole leaks in some water conditionsRepipe only with a clear leak pattern; otherwise spot repair
LeadHealth risk; no safe exposure levelRecommend replacement and explain the utility's role in the service line
PEX or CPVCUsually modern; check fittings and installation qualityRarely a repipe reason by itself

Be careful with identification. Misidentifying a material, especially calling something lead or polybutylene when it is not, damages trust quickly. If you are not sure, say so and confirm before it goes in a proposal.

Galvanized pipe, lead and the health question

Galvanized pipe has a specific place in EPA's lead rules. Under the Lead and Copper Rule Improvements, a galvanized service line that is or ever was downstream of a lead service line, or is downstream of a line of unknown material, is classed as galvanized requiring replacement, and water systems must fully replace lead and such galvanized lines under their control within 10 years[1]. That rule covers service lines, not interior plumbing, but it explains why homeowners and utilities are paying attention to galvanized pipe in older homes.

New work must use lead-free materials. Under Safe Drinking Water Act Section 1417, lead free means a weighted average of 0.25% lead across wetted surfaces of pipes, fittings and fixtures, and 0.2% for solder and flux[2]. Say this in the proposal; it reassures customers who came to you worried about lead.

Repipe or spot repair?

  1. Is the problem in one area or throughout the house? One area favors spot repair.
  2. Is the material itself failing, or was one section damaged? Failing material favors a repipe.
  3. How long will the customer stay? Short stays favor repair and disclosure; long stays favor a repipe.
  4. Are walls being opened for other reasons soon? That lowers the cost and disruption of a repipe.
  5. What would another leak damage? A leak over a finished basement or under hardwood floors raises the stakes.

Always price the spot repair alongside the repipe. A customer who chooses the repair with full information may come back for the repipe later; one who feels pushed will not. For a general framework, see repair or replace: guiding the customer conversation.

Staging the job

Customers worry about the disruption more than the price. Answer those worries before they ask, with a written plan:

  • How many days the job takes, and on which days the water will be off and for how long.
  • Which walls and ceilings will be opened, marked on a simple floor sketch.
  • Who patches the openings, to what standard, and whether painting is included.
  • How furniture and floors are protected, and how the site is cleaned each day.
  • When the permit inspection happens and what the customer needs to do for it.
  • Where the crew parks and which entrance they use.

Plan water outages around the household. Restoring water to at least one bathroom each evening makes a multi-day job livable for most families. Put the schedule on paper and stick to it; a crew that finishes when promised gets referrals.

The financing conversation

Repipes often lead to questions about payment over time. If you offer financing through a lender, show the full cash price first and let the lender's documents carry the financing terms and disclosures. Never present only a monthly figure.

Because repipes are usually sold at the customer's home, the FTC's Cooling-Off Rule may apply. It gives buyers until midnight of the third business day to cancel certain home sales of $25 or more, with exceptions for emergencies and for repairs the customer asked you to come and do[3]. A repipe proposed during a leak repair visit is usually beyond what the customer asked for, so provide the cancellation notice and schedule work after the cancellation period unless the job is a genuine emergency.

What goes in the proposal

  • The evidence summary, with photos and the repair history.
  • Scope: materials, fixtures and connections included, and what is excluded.
  • The staging plan, water outage schedule and patching scope.
  • Permits and inspections.
  • Warranty on materials and workmanship.
  • The spot repair option and its price, so the customer can compare.
  • Cancellation rights where they apply.

Who to talk to

Older homes are where repipes concentrate. NAHB's analysis of 2024 American Community Survey data puts the median owner-occupied home at 42 years old[5]. Water damage claims for water and freezing averaged about $15,400 over 2019 to 2023[6], so a household with repeated leaks has a real stake in the decision. Direct outreach in neighborhoods with known galvanized or polybutylene piping, explained in direct mail for plumbing companies, works best when it offers an inspection rather than a repipe.

Example: from third leak to repipe

Example (fictional): a 1962 house has its third galvanized pipe leak in two years. The technician repairs the leak, cuts out the old section with the customer's permission and shows heavy internal corrosion. Pressure is fine but flow drops sharply upstairs when the kitchen runs. The evidence summary lists the three repairs, the material survey and the photos. The proposal prices a full repipe over three days, with water restored every evening and drywall patching included, plus a spot repair option for comparison. The customer receives the cancellation notice, takes a week to decide and books the repipe for the following month.

Frequently asked questions

When is a whole-house repipe better than spot repairs?

When the pipe material is failing throughout the house, leaks keep appearing in different places, or walls will be opened anyway. One damaged section usually calls for a spot repair.

Does galvanized pipe contain lead?

Galvanized pipe can collect lead if it is or was downstream of a lead line, which is why EPA's rule treats such service lines as requiring replacement[1]. A certified lab test answers the question for a specific home.

How long does a repipe take?

It depends on the house, but many single-family repipes take a few days. A good proposal states the days, the water outage schedule and when water will be restored each evening.

Can customers cancel a repipe after signing?

For sales made in the home that go beyond the repair they asked for, the FTC's Cooling-Off Rule may allow cancellation until midnight of the third business day[3].

References

  1. U.S. Environmental Protection Agency (2024). EPA's Final Lead and Copper Rule Improvements: Service Line Inventory and Replacement Requirements (technical fact sheet) (opens in a new tab) โ†‘

  2. U.S. Environmental Protection Agency (2026). Use of Lead Free Pipes, Fittings, Fixtures, Solder and Flux for Drinking Water (opens in a new tab) โ†‘

  3. Federal Trade Commission (Consumer Advice) (n.d.). Buyer's Remorse: The FTC's Cooling-Off Rule May Help (opens in a new tab) โ†‘

  4. U.S. Environmental Protection Agency (WaterSense) (2026). Fix a Leak Week (opens in a new tab) โ†‘

  5. National Association of Home Builders (Eye on Housing) (2026). Age of Housing Stock by State (opens in a new tab) โ†‘

  6. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo