Sales memberships

Measuring and improving technician closing rates

How to define technician closing rate, count opportunities consistently, compare techs fairly across call types and coach without adding pressure.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why the number is often misleading
  2. Definitions to agree on
  3. What counts as an opportunity
  4. Comparing technicians fairly
  5. Small shops, small samples
  6. Look past the rate
  7. After-hours and emergency calls
  8. Coaching that moves the number
  9. Recording calls and visits
  10. Red flags in the data
  11. Talking to technicians about their numbers
  12. A monthly scorecard
  13. Example: reading one technician's scorecard
  14. Frequently asked questions
  15. References
Sales memberships: Measuring and improving technician closing ratesArticle coverSALES MEMBERSHIPSMeasuring and improvingtechnician closingratesAva for PlumbersInsightsSales memberships: Measuring and improving technician closing ratesArticle coverSALES MEMBERSHIPSMeasuring andimproving technicianclosing ratesAva for Plumbers

Key takeaways

  • Define the opportunity before the rate: a closing rate is only as good as the rule for what gets counted in the denominator.
  • Compare technicians on similar work. Call mix, member share and after-hours calls change close rates more than skill does.
  • Most shops are small: about 63% of plumbing, heating and AC firms had receipts under $1 million in 2022[1], so monthly samples per tech are small too.
  • Coach with records and recordings, and get consent where state law requires it before recording[2].

Why the number is often misleading

Closing rate sounds simple: of the jobs a technician quoted, how many did the customer approve? In practice, shops calculate it in different ways, count different things as opportunities and compare technicians running very different work. The result is a league table that rewards whoever got the easy calls and punishes the technician who took the after-hours emergencies and the difficult customers.

Preparing cost estimates for clients is one of the core duties BLS lists for plumbers[3], so closing rate is a reasonable thing to measure. It just needs a clear definition, a fair comparison and a few companion measures so it does not drive the wrong behavior.

Definitions to agree on

Core sales measures for plumbing technicians
MeasureHow to calculateWhat it tells you
Opportunity close rateOpportunities sold ÷ opportunities presentedHow often presented work is approved
Presentation rateOpportunities presented ÷ eligible callsWhether the tech offers options at all
Average sold ticketRevenue from sold opportunities ÷ number soldSize of the work customers approve
Revenue per opportunityRevenue sold ÷ opportunities presentedCombines close rate and ticket in one figure
Callback rateJobs needing a return visit for the same issue ÷ jobs completedQuality check on what was sold
Membership conversionMemberships sold ÷ eligible non-member callsSeparate from repair close rate

Revenue per opportunity is often the most useful single measure, because a technician can raise close rate by only quoting small jobs, or raise average ticket by only quoting large ones. Revenue per opportunity rewards neither trick on its own. Callback rate keeps both honest.

What counts as an opportunity

  • Any call where the technician diagnosed a problem and presented at least one written option with a price.
  • Not counted: calls where no work was possible, such as no access, a utility problem or a customer who cancelled on arrival.
  • Not counted: warranty and callback visits where the customer is not paying.
  • Counted separately: memberships and maintenance agreements, which have their own measure.
  • Counted once: one opportunity per call, even if several options were presented.

Write the rules down and apply them in the software, not by hand. If technicians decide what counts, the numbers will drift toward whatever makes them look good.

Comparing technicians fairly

  • Call type: drain calls, water heater calls and leak calls close at different rates. Compare within call type, or weight for mix.
  • Customer type: members, repeat customers and new customers behave differently.
  • Time of day: after-hours and weekend emergency calls often close at high rates but involve fewer options. Plumbers are often on call for evenings and weekends[3], so rotation affects everyone's numbers.
  • Territory: neighborhoods with older homes and different incomes produce different opportunities.
  • Tenure: new technicians should be compared with their own progress, not with veterans.

A simple way to start is to show each technician's close rate next to the shop average for the same call types. A tech who closes below average on drains but above on water heaters needs specific coaching, not a general talk.

Small shops, small samples

Most plumbing companies are small. In 2022, about 63% of plumbing, heating and AC contractor firms had annual receipts under $1 million, and about 28% had receipts between $1 million and $5 million[1]. The industry generated roughly $260,000 in receipts per employee[4]. In a shop that size, a technician may present only a few dozen opportunities a month, split across call types.

Plumbing, heating and AC contractor firms by annual receipts, 2022Under $1 million and $1 million to $5 million are published shares; $5 million or more is the remainder.
Plumbing, heating and AC contractor firms by annual receipts, 2022Donut chart. Under $1 million: 63%; $1 million to $5 million: 28%; $5 million or more: 9%.Under $1 million: 63%$1 million to $5 million: 28%$5 million or more: 9%Firms
  • Under $1 million 63%
  • $1 million to $5 million 28%
  • $5 million or more 9%

Source: U.S. Census Bureau, 2022[1]

Show the data
ItemValue
Under $1 million63%
$1 million to $5 million28%
$5 million or more9%

Example (fictional): a tech who presents 40 opportunities in a month and closes 24 has a 60% close rate. If two more customers had said yes, it would be 65%; two fewer, 55%. A ten-point swing from four decisions is noise, not a trend. Use rolling three-month figures, and do not coach on one month's change unless something else in the records supports it.

Look past the rate

A very high close rate is not automatically good. It can mean a technician is excellent at explaining options, or that they only present when the customer is already sold, or that they apply pressure. Look at presentation rate, revenue per opportunity, callbacks, refunds and complaints together. A technician with a slightly lower close rate, more presentations, few callbacks and good reviews may be worth more to the business than the leader of the close-rate board.

Labor is getting more expensive, too: average hourly earnings at plumbing, heating and AC contractors were about 4.4% higher in September 2026 than a year earlier[5]. Every visit that ends without a decision costs more each year, which makes follow-up on unsold estimates part of any closing-rate plan.

After-hours and emergency calls

Emergency calls distort closing rates in both directions. A homeowner with water on the floor at midnight approves the repair almost every time, so close rates on those calls look excellent. But the options are narrower, the customer is stressed and larger recommendations are usually better left for a follow-up. Report emergency and after-hours calls as their own category, and judge technicians on them mainly by whether the problem was solved, the price was explained before work began and any larger recommendation was written down for a daytime follow-up rather than pressed at the door.

Coaching that moves the number

  1. Read the records

    Pull a technician's last 20 opportunities. Look at photos, option sets and notes. Patterns appear quickly, such as single options or missing do-nothing notes.

  2. Ride along

    Spend a day with the technician and watch the presentation, not the repair. Note timing and wording.

  3. Listen to recordings

    Where calls or visits are recorded lawfully, review two or three together and pick one thing to change.

  4. Practice

    Role-play the change in the morning meeting with real job photos.

  5. Follow up unsold work

    Make sure every unsold estimate has a scheduled follow-up. Many decisions happen days later.

  6. Recheck in a quarter

    Compare the rolling three-month figures for the same call types.

Recording calls and visits

Recordings are the fastest coaching tool, but they carry legal duties. Federal wiretap law allows a call to be recorded when the recorder is a party or one party has consented, while some states require the consent of all parties[2]. Announce recording on office calls, get the customer's agreement before recording in-home conversations, and check your states' rules. When in doubt, use ride-alongs instead.

Red flags in the data

  • Close rate far above peers with callback or refund rates also above peers.
  • A sudden jump in average ticket without a change in call mix.
  • Presentation rate falling while close rate rises: the tech may be quoting only sure things.
  • Complaints or negative reviews mentioning pressure, clustered on one technician.

Each of these warrants a conversation and a ride-along, not an automatic conclusion. Sometimes the explanation is a run of unusual jobs.

Talking to technicians about their numbers

Numbers land badly when they arrive as a verdict. Start the conversation with what the technician does well, show the measures beside the shop averages for the same call types, and ask what they think explains any gap before offering your view. Technicians often know exactly why a month looked odd: a run of rental properties, a week of rain-driven drain calls, a new territory. Agree on one change to try and a date to look again. Keep the conversation private and keep notes, so the next review builds on this one instead of starting over.

A monthly scorecard

  1. Presentation rate by call type.
  2. Close rate by call type, rolling three months.
  3. Revenue per opportunity.
  4. Callback and refund rate.
  5. Unsold estimates with a scheduled follow-up.
  6. Membership conversion, reported separately.

Share it with each technician privately, with the shop averages beside their figures. Public boards can motivate, but they also pressure, so many shops show only team totals in public.

Example: reading one technician's scorecard

Example (fictional): over three months, a technician presents options on 78% of eligible calls, against a shop average of 85%, and closes 58% against 55%. Revenue per opportunity is close to average and callbacks are low. The coaching focus is presentation: on drain calls he often clears the line and leaves without mentioning the camera inspection or the seized stops he noted. The fix is a short look-around habit and the option set in the app. For fixture-related opportunities he misses, see selling toilets, faucets and valves well, and for unsold work, the follow-up after a service call.

Frequently asked questions

What is a good closing rate for plumbing technicians?

It depends on call mix, customer type and how opportunities are defined. Compare each technician with the shop average for the same call types, using rolling three-month figures.

Should membership sales count in closing rate?

Track them separately. Mixing memberships into repair close rate hides problems in both.

Is it legal to record technicians' conversations with customers?

Federal law allows one-party consent, but some states require all parties to consent[2]. Get the customer's agreement and check state rules first.

How do we stop closing-rate targets from creating pressure?

Pair close rate with presentation rate, revenue per opportunity, callbacks and complaints, and coach on the records rather than ranking technicians publicly.

References

  1. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: Firms by industry and enterprise receipts size (opens in a new tab) ↑

  2. Legal Information Institute, Cornell Law School (2026). 18 U.S. Code § 2511 - Interception and disclosure of wire, oral, or electronic communications prohibited (opens in a new tab) ↑

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  4. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) ↑

  5. U.S. Bureau of Labor Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo