Call handling

How many CSRs does a plumbing company need?

Turn peak-hour calls, handle time and an answer-speed target into a CSR headcount, with Erlang C worked numbers, shrinkage and an overflow plan.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing11 min read

On this page
  1. Start from the busiest hour
  2. Input 1: calls offered in the peak hour
  3. Input 2: handle time, including the notes
  4. Input 3: the answer standard you will hold
  5. Run the math: workload, then Erlang C
  6. Turn seats into people
  7. Example: a nine-truck shop's weekday
  8. The ratio check: CSRs per technician
  9. Covering the hours no schedule reaches
  10. Signs the desk is too small, or too big
  11. Frequently asked questions
  12. References
Call handling: How many CSRs does a plumbing company need?16,240: customer service representatives employed by US plumbing, heating and AC contractors in May 2025CALL HANDLINGHow many CSRs does aplumbing company need?16,240customer service representatives employed by USplumbing, heating and AC contractors in May 2025Ava for PlumbersInsightsCall handling: How many CSRs does a plumbing company need?16,240: customer service representatives employed by US plumbing, heating and AC contractors in May 2025CALL HANDLINGHow many CSRs does aplumbing companyneed?16,240customer service representativesemployed by US plumbing, heating andAC contractors in May 2025Ava for Plumbers
Figure source: U.S. Bureau of Labor Statistics, 2025[1]

Key takeaways

  • Size the desk from your busiest hour, not the daily total: calls in that hour times handle time (talk plus wrap-up) is the work arriving.
  • Write down an answer standard first. Call centers usually target a share of calls answered within 20 or 30 seconds[2].
  • Small desks need more spare capacity than averages suggest: in the Erlang C model one person taking six 6-minute calls an hour answers only about 41% within 20 seconds (Example).
  • Turn seats into people with shrinkage: absences, paid leave, breaks and the non-phone work CSRs also do[3][4].
  • Cover the peak by pooling the dispatcher and manager into a second ring group and adding an overflow layer, not by hiring for the busiest two hours.

Start from the busiest hour

Most owners size the office from the daily count. Ninety calls a day, a good CSR can take a hundred, so one CSR is plenty. Then Monday at 8 a.m. brings sixteen calls in an hour, the CSR is still on the second call when the third and fourth ring, and two of them reach voicemail. The daily total was right. The hour was wrong.

Staffing a phone desk is a peak problem. Three numbers decide it: how many calls arrive in your busiest hour, how long each one keeps a person busy, and how fast you want callers answered. Part-timers, ring groups and overflow are all ways of meeting those three numbers at a sensible cost.

This guide takes each number in turn, runs the math on a worked Example and ends with the headcount and overflow plan that come out of it. If you have never pulled hourly call counts, start with forecasting call volume by hour and day, which builds the hour-of-week profile used here.

Input 1: calls offered in the peak hour

Count calls offered, not calls answered. A call that rang out, reached voicemail or hung up in the queue was still work that arrived. Leave those out and your busiest hours look quieter than they are, because they are exactly the hours when calls go unanswered. A one-week call audit gives you clean counts if your phone reports are muddled.

  • Pull four to eight normal weeks. Drop holiday weeks and freeze days and plan for those separately.
  • Count by hour of the week. Monday from 8 to 9 a.m. and Thursday from 8 to 9 a.m. are different hours with different staffing.
  • Use a busy normal week for each hour, not the average week, so the plan holds on an ordinary hard Monday.
  • Count callers once. A homeowner who rings four times in three minutes is one call of work and three signs that nobody picked up.
  • Keep outbound work in view. Callbacks, estimate follow-ups and confirmations come out of the same people's hours.

Input 2: handle time, including the notes

Handle time is everything a call costs the person who took it: the talk, the hold while they check the board, and the work after the caller hangs up. Call-center researchers call that last part wrap-up, such as updating the customer's history or processing what the caller asked for[2]. In a plumbing office it means typing job notes, tagging the lead source and telling dispatch. Leave it out and every staffing number comes out low.

Measure it from your own calls. Many phone systems report talk time only, so time a sample end to end for a week, from pick-up to the moment the CSR is ready for the next caller. For scale, the same research describes a catalog retailer whose calls averaged about 3.75 minutes with 30 seconds of after-call work[2]. A plumbing booking call carries more: an address and ZIP read back, the problem in the caller's words, urgency and an arrival window. The guide to average handle time for booking calls breaks that down by call type.

Input 3: the answer standard you will hold

Before any math, decide what answered means in your office. Call centers usually express it as a service level, the share of calls answered within a set number of seconds, with 20 or 30 seconds as the common targets[2]. Pair it with the abandonment rate, because callers who give up never appear in an average wait.

A plumbing office does not need a bank's standard, but it does need one. Emergency callers have the next plumber one tap away, and routine callers judge you on how long it took to reach a person. A workable starting standard for business hours, using the common 20-second target[2], is 80% of calls answered within 20 seconds. The guide to average speed of answer covers how to measure it and what slow answers cost in booked jobs.

Example standard to write down: โ€œWeekdays 7 a.m. to 6 p.m., 80% of calls answered by a person within 20 seconds, under 5% abandoned, and nobody waits longer than two minutes.โ€

Run the math: workload, then Erlang C

Workload first. Calls in the hour times handle time in minutes, divided by 60, gives the hours of phone work arriving in that hour. Example: 16 calls at six minutes each is 96 minutes, or 1.6 hours of work arriving every hour. You cannot cover that with 1.6 people. Calls do not arrive neatly spaced, and while one CSR is tied up for six minutes the next caller is already ringing.

The standard tool for the next step is the Erlang C model. It turns calls per hour, handle time and a staffing level into the expected wait and the share answered within your target. It assumes calls arrive at random and are served in order, and it ignores busy signals, hang-ups and redials[2]. In a plumbing office the ignored callers are the ones who reach voicemail or phone another plumber, so read the model as the staffing needed to stop that happening, not a forecast of what will happen.

Example: callers answered within 20 seconds at 16 calls an hourModelled with Erlang C, six-minute handle time, nobody hangs up.
Example: callers answered within 20 seconds at 16 calls an hourColumn chart. 2 people: 31%; 3 people: 75%; 4 people: 92%; 5 people: 98%.0%25%50%75%100%2 people: 31%31%2 people3 people: 75%75%3 people4 people: 92%92%4 people5 people: 98%98%5 peopleExample: callers answered within 20 seconds at 16 calls an hourColumn chart. 2 people: 31%; 3 people: 75%; 4 people: 92%; 5 people: 98%.0%25%50%75%100%2 people: 31%31%2 people3 people: 75%75%3 people4 people: 92%92%4 people5 people: 98%98%5 people

Source: Manufacturing & Service Operations Management (Gans, Koole and Mandelbaum), 2003[2]

Show the data
People answeringAnswered within 20 seconds
2 people31%
3 people75%
4 people92%
5 people98%

The chart shows why the answer is rarely the workload rounded up. With 1.6 hours of work arriving per hour, two people answer about 31% of callers within 20 seconds in the model, three answer about 75% and four about 92% (Example, modelled). Four looks like overstaffing on paper, because at that volume each person is on a call only about 40% of the time. That idle-looking time is what a 20-second standard costs.

Small desks pay the most for it. Queueing research is blunt: performance worsens sharply as utilization climbs, worsens again with longer and more variable calls, and improves with more people answering in parallel[2]. One CSR on their own is the extreme case.

Example: one CSR, six calls an hour, six minutes each. The CSR is busy 60% of the hour, which sounds comfortable. In the Erlang C model only about 41% of callers are answered within 20 seconds and the average wait is around nine minutes. Add a second person who picks up when the first is busy and about 87% are answered within 20 seconds.

Turn seats into people

The math gives seats: people who must be free to answer in each hour. A person is not a seat for their whole shift. Full-time workers had a 3.2% absence rate in 2025[3], and private-industry workers averaged 11 paid vacation days and 7 paid sick days after a year of service[4]. Then come breaks, the morning huddle, training and the non-phone work every plumbing CSR does: payments, confirmations, follow-up calls and fixing the board when a job runs long.

  1. Add up seat-hours

    For each hour block, multiply the seats needed by the hours in the block, then total the day.

  2. Estimate shrinkage

    Example: absence about 3%, 18 days of paid leave a year about 7%, breaks and huddles about 12%. Call it 22%, so an eight-hour CSR gives roughly 6.2 hours ready for calls.

  3. Take out other work

    If CSRs also spend an hour a day on payments and follow-ups, subtract it too, unless that work can move to the quiet afternoon.

  4. Divide, then round with judgment

    Seat-hours divided by ready hours per person gives full-time equivalents. Hire for the floor you must always cover and meet the peak with pooled people and overflow.

Example: a nine-truck shop's weekday

Example: a nine-truck residential shop takes about 100 calls on a typical weekday between 7 a.m. and 6 p.m., with an average handle time of six minutes including notes. Its hour-by-hour profile, and the modelled share of callers answered within 20 seconds at each staffing level, looks like this.

Example, modelled with Erlang C at a six-minute handle time. Shares are callers answered within 20 seconds, assuming nobody hangs up.
Hour blockCalls per hourPhone work (hours per hour)2 people3 people4 people
7โ€“8 a.m.80.879%95%99%
8โ€“10 a.m.161.631%75%92%
10 a.m.โ€“12 p.m.101.069%92%98%
12โ€“1 p.m.80.879%95%99%
1โ€“4 p.m.60.687%98%over 99%
4โ€“6 p.m.80.879%95%99%

Two people hold close to 80% for most of the day. The morning peak needs four, the late morning three, and lunch effectively drops back to one person unless breaks are covered. Hiring a fourth full-time CSR for two hours of the day would buy a lot of idle afternoon. The owner in this Example settles on a plan instead:

  • Two full-time CSRs on staggered shifts, 7 a.m. to 3:30 p.m. and 9:30 a.m. to 6 p.m., so both overlap from the late-morning push through mid-afternoon.
  • A part-time CSR from 8 a.m. to noon, the hours the table says need a third and fourth seat.
  • The dispatcher and office manager in a second ring group from 8 to 10 a.m. and after 3:30 p.m., when one CSR is on.
  • An overflow layer that takes any call still ringing after 20 seconds, which also covers lunch breaks. In the model about a quarter of peak callers would reach it with three people answering.

That is 2.5 CSR positions for nine trucks. The third and fourth seats in the morning are mostly waiting for calls; an overflow layer is only used when the people are busy, which is why pooling and overflow usually beat hiring for the peak.

The ratio check: CSRs per technician

Owners often ask for a ratio instead: one CSR per so many trucks. Industry data gives a rough sense of scale. In May 2025, plumbing, heating and air-conditioning contractors employed about 16,240 customer service representatives[1] and 12,070 dispatchers[5], against about 330,570 plumbers, pipefitters and steamfitters[6]. That is roughly one CSR or dispatcher for every twelve plumbers, and fewer per technician once the HVAC mechanics those firms also employ are counted.

Use the ratio as a sanity check, not a plan. It cannot see your calls per truck, your mix of emergency and maintenance work, or whether your CSRs also dispatch, collect payments and chase estimates. A shop that runs mostly scheduled maintenance and one that lives on burst pipes can have the same truck count and need very different desks. Compare inbound volume first with calls per truck benchmarks, then staff to the hour.

Covering the hours no schedule reaches

Even a well-sized weekday desk covers about 55 of the week's 168 hours. Weekends are the obvious gap: on an average weekend day or holiday in 2025, 30.3% of employed people worked, against 80.5% on a weekday[7]. Your office staff are mostly among those off, while the homeowners calling you are at home noticing the leak.

Nights, weekends, lunch and the 8 a.m. rush are where an overflow layer earns its keep. The usual choices are the on-call tech's phone, an answering service, or an SI Employee that takes the calls your office forwards when lines are busy, unanswered or closed. It answers in your business name, takes the address, ZIP, problem, urgency and callback number and reads them back, sends urgent calls down your on-call path, books routine work into one tested schedule or leaves it as a request, and emails a summary with the recording and transcript (see what it does). The eight-truck residential example shows how that setup would sort night calls, and AI call handling vs hiring another CSR weighs it against a hire.

Example: where a peak-hour call goes
  • Caller
  • Your team
  • System
  • SI Employee
  1. 01Caller

    Caller rings the main line

    Monday 8:40 a.m.; both CSRs on duty are already on calls.

  2. 02Your team

    Second ring group

    Dispatcher and office manager ring next, during peak hours only.

  3. 03System

    Forward after 20 seconds

    Still unanswered, the phone system forwards the call to the overflow layer.

  4. 04SI Employee

    SI Employee takes the job

    Address, ZIP, problem, urgency and callback number, read back to the caller.

  5. 05System

    Urgent or routine

    Urgent calls follow the on-call path; routine work is booked or left as a request.

  6. 06Your team

    Office follows up

    Summary email with recording and transcript; a CSR confirms when free.

Example routing. Ring times and who sits in each group are your choices; test them on a quiet afternoon.

Signs the desk is too small, or too big

  • Too small: the morning peak misses its answer standard most weeks, abandoned calls cluster in the same hours, and CSRs skip notes to reach the next caller.
  • Too small: callbacks pile up by noon and are still being worked at 4 p.m.
  • Too big: afternoon occupancy stays low for weeks and the extra person drifts into tasks nobody scheduled.
  • Wrong shape: the total is right but people are on at the wrong hours. Move start times before you hire.
  • Hidden load: techs and the owner are answering calls the desk should take. See what it costs when technicians answer the phones.

Recheck the numbers each season. Handle time creeps up when you add services, and call volume moves with weather and marketing pushes. The overflow plan for peak hours is the companion document: who rings, in what order, and what happens when nobody answers.

Frequently asked questions

How many calls can one CSR handle in a day?

On paper, an eight-hour day at a six-minute handle time is 80 calls with no gaps. Calls bunch together, so a single CSR who must answer within 20 seconds can take far fewer before callers wait. In the Erlang C model, one person taking six 6-minute calls an hour answers only about 41% of callers within 20 seconds (Example). Plan from your peak hour and your answer standard, not a daily maximum.

What is a normal CSR-to-technician ratio for a plumbing company?

Industry counts give roughly one CSR or dispatcher for every twelve plumbers at plumbing, heating and AC contractors in May 2025[1][5][6]. Ratios ignore call volume, job mix and what else your CSRs do, so use one as a check after sizing the desk from your own calls.

Should the dispatcher count toward CSR staffing?

Only for the hours you deliberately put the dispatcher in a ring group, usually the morning peak and the end of the day, and only if the board can wait a few minutes. A dispatcher who answers every overflow call all day stops dispatching. Splitting the CSR and dispatcher roles covers when to separate them.

Is Erlang C accurate for a two-person office?

It is a model with simple assumptions: random arrivals, calls served in order and nobody hanging up or redialing[2]. Real callers hang up, so measured waits look better than the model while lost calls rise. Use it to compare staffing options for the same hour, then check your phone system's answer and abandonment reports.

When should we hire instead of adding overflow?

Hire when the gap sits inside business hours on most days, when the work needs someone who knows your customers and board, or when CSRs carry hours of non-phone work. Add overflow when misses cluster in short peaks, lunch, evenings and weekends that no sensible shift pattern covers.

References

  1. U.S. Bureau of Labor Statistics (2025). Occupational Employment and Wage Statistics, May 2025: Customer service representatives, plumbing, heating and air-conditioning contractors (opens in a new tab) โ†‘

  2. Manufacturing & Service Operations Management (Gans, Koole and Mandelbaum) (2003). Telephone Call Centers: Tutorial, Review, and Research Prospects (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Absences from work of employed full-time wage and salary workers (CPS Table 46) (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2026). Paid leave benefits: Average number of sick and vacation days by length of service requirement, March 2026 (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics (2025). Occupational Employment and Wage Statistics, May 2025: Dispatchers, plumbing, heating and air-conditioning contractors (opens in a new tab) โ†‘

  6. U.S. Bureau of Labor Statistics (2025). Occupational Employment and Wage Statistics, May 2025: Plumbers, pipefitters and steamfitters, plumbing, heating and air-conditioning contractors (opens in a new tab) โ†‘

  7. U.S. Bureau of Labor Statistics (2025). American Time Use Survey, Table 4: Employed persons working and time spent working on days worked, 2025 (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo