Call handling

Average speed of answer and booked plumbing jobs

How to measure average speed of answer, why it hides hang-ups, which targets to borrow, and a calculator for the jobs slow answers cost a plumbing shop.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing9 min read

On this page
  1. Seconds the caller counts
  2. What your phone report is measuring
  3. Why emergency callers hang up fast
  4. Benchmarks worth borrowing
  5. How staffing moves ASA
  6. Measure it by the hour
  7. Five ways ASA gets flattered
  8. After hours: a different clock
  9. What slow answers cost
  10. Answering fast when the desk is full
  11. Frequently asked questions
  12. References
Call handling: Average speed of answer and booked plumbing jobs90%: of 9-1-1 calls must be answered within 15 seconds under NENA's call processing standardCALL HANDLINGAverage speed of answer andbooked plumbing jobs90%of 9-1-1 calls must be answered within 15 seconds underNENA's call processing standardAva for PlumbersInsightsCall handling: Average speed of answer and booked plumbing jobs90%: of 9-1-1 calls must be answered within 15 seconds under NENA's call processing standardCALL HANDLINGAverage speed ofanswer and bookedplumbing jobs90%of 9-1-1 calls must be answered within15 seconds under NENA's callprocessing standardAva for Plumbers
Figure source: National Emergency Number Association, 2026[1]

Key takeaways

  • Average speed of answer measures how long answered callers waited. It leaves out callers who gave up, so read it with the abandonment rate[2].
  • Start the clock at the first ring, not when the call enters a queue, or a long greeting and ring group hide inside a good-looking number.
  • Borrow a target: call centers commonly aim for a share of calls answered within 20 or 30 seconds[2], and 9-1-1 centers must answer 90% within 15 seconds[1].
  • Averages hide bad hours. Track ASA and service level by hour block and fix the worst hour first.
  • Price slow answers with the missed-calls Example: abandoned and unanswered new-work calls times booking rate times average ticket.

Seconds the caller counts

A homeowner with water spreading across the laundry room floor counts rings. Four rings feels long; eight feels like nobody is there. Whoever answers first usually gets the job, which makes the seconds before pickup one of the cheapest numbers in the business to improve and one of the most expensive to ignore.

Call centers track those seconds as average speed of answer, or ASA. Research on call-center operations describes it as the time calls spend waiting before a representative serves them, and adds a warning that matters for plumbers: ASA does not include the waiting time of callers who hung up, so a reasonable picture needs at least ASA and the abandonment rate together[2].

In a busy plumbing office that warning is the whole story. On the worst morning of the month, the callers who waited longest are the ones who gave up and phoned someone else. They drop out of ASA, and the average looks fine.

What your phone report is measuring

Read ASA with at least the abandonment and voicemail rates beside it.
MetricWhat it countsBlind spot
Average speed of answerAverage wait of the calls a person answeredLeaves out callers who hung up or reached voicemail
Service levelShare of calls answered within a target, such as 20 secondsSays nothing about how long the rest waited
Abandonment rateShare of callers who hung up before an answerVery short hang-ups are often misdials; agree a cutoff
Longest waitThe single worst wait in the periodOne storm morning can dominate it
Voicemail rateShare of calls that ended in a mailboxOften counted as answered by the phone system

Then check where the clock starts. Many systems start timing when a call enters a queue, after the greeting and any phone menu. A caller who listened to a 20-second greeting, pressed 2 and waited 15 seconds lived through 35 seconds; the report says 15. Ring groups cause the same gap: if desk phones ring for 20 seconds before a call reaches a queue, those seconds may not count anywhere. Ask your provider, or test it: call in, time the wait with a stopwatch and compare it with the report. The menu side is covered in whether a plumbing company should use a phone menu, and ring timers in how many rings before voicemail.

Why emergency callers hang up fast

Callers with an emergency do not wait the way callers to a bank do. They have water running, a results page full of other plumbers and no reason to think you will pick up. Water damage is expensive enough to keep them dialing: the average homeowners insurance claim for water damage and freezing was about $15,400 over 2019 to 2023[3]. Why emergency callers phone three plumbers at once looks at that behavior in detail.

Calling them back rarely recovers the job. Only 19% of US adults say they generally answer calls from unknown numbers[4], and your callback comes from a number they dialed once in a hurry. Lead platforms watch speed too: Google lists responsiveness to customer inquiries among the ranking factors for Local Services Ads and says missed calls may hurt it[5].

Even regulators treat a few rings as a fair chance to answer. Under the FCC's telemarketing rules, a caller may not hang up on an unanswered call before at least 15 seconds or four rings[6]. That is the minimum the rules give a person to reach their phone. A customer calling you for help will rarely give you much longer.

Benchmarks worth borrowing

There is no trustworthy plumbing-specific ASA benchmark; the figures on vendor blogs rarely publish a method. Borrow the structure from fields that do publish their standards:

Published answer-time yardsticks
  • 90% in 15 s

    9-1-1 calls that must be answered, under the NENA standard[1]

  • 95% in 20 s

    9-1-1 calls that should be answered, under the same standard[1]

  • 20–30 s

    Typical service-level targets used by call centers[2]

  • 31 s

    Daily average ASA across 12 call centers of a large US health insurer[2]

Different jobs, different stakes. A plumbing office can sit between a 9-1-1 center and a typical call center.

A sensible standard for staffed hours sits between them, using the common 20-second target[2]: 80% of calls answered by a person within 20 seconds, abandonment under 5%, and no caller waiting more than two minutes. Emergencies should not wait in a queue behind routine calls at all. What counts as a plumbing emergency sets out a routing policy.

How staffing moves ASA

ASA does not move in a straight line with staff. With the same calls, one more person can cut the average wait from minutes to seconds, and one fewer can do the reverse. That pattern comes straight out of the Erlang C model used to staff call centers, which assumes random arrivals and nobody hanging up[2].

Example: average wait at 18 calls an hourSix-minute handle time, modelled with Erlang C; nobody hangs up.
Example: average wait at 18 calls an hourColumn chart. 3 people: 106 sec; 4 people: 21 sec; 5 people: 5 sec.0 sec50 sec100 sec150 sec3 people: 106 sec106 sec3 people4 people: 21 sec21 sec4 people5 people: 5 sec5 sec5 peopleExample: average wait at 18 calls an hourColumn chart. 3 people: 106 sec; 4 people: 21 sec; 5 people: 5 sec.0 sec50 sec100 sec150 sec3 people: 106 sec106 sec3 people4 people: 21 sec21 sec4 people5 people: 5 sec5 sec5 people

Source: Manufacturing & Service Operations Management (Gans, Koole and Mandelbaum), 2003[2]

Show the data
People answeringAverage speed of answer
3 people106 sec
4 people21 sec
5 people5 sec

In the Example, three people answering 18 six-minute calls an hour leave the average answered caller waiting about 106 seconds. A fourth person brings that to about 21 seconds and a fifth to about five (modelled). Real callers hang up long before the model's longest waits, so a three-person desk in that hour shows a better ASA than this and a much worse abandonment rate. The full method is in how many CSRs a plumbing company needs.

Measure it by the hour

  1. Pull two normal weeks

    Export calls with start time, wait, outcome (answered, abandoned, voicemail) and the line dialed.

  2. Start the clock at the first ring

    If the report starts at the queue, add the greeting and menu time you measured with a stopwatch.

  3. Group by hour block

    At minimum: weekday 7 to 9 a.m., late morning, lunch, afternoon, evening and weekend.

  4. Put three numbers side by side

    ASA, share answered within 20 seconds, and the abandoned plus voicemail share, for each block.

  5. Fix the worst block first

    One bad hour usually has one cause: overlapping lunches, a missing second ring group or a long menu.

Share the hour-block table with the people who answer the phones. Read it beside your call answer rate and hold time reports, so the whole team argues from the same picture rather than from the weekly average.

Five ways ASA gets flattered

Once a number goes on the wall, people find ways to move it. Some are honest fixes. Others only move the number, and the callers notice the difference before you do.

  • Short-abandon cutoff set too long. Excluding hang-ups under five seconds removes misdials; excluding everything under 30 seconds removes real callers who gave up.
  • Voicemail counted as answered. The mailbox picks up instantly, so ASA falls while jobs walk away.
  • Answer and park. A CSR picks up, says β€œplease hold” and parks the caller. ASA looks excellent; the wait has simply moved to the hold timer.
  • A longer greeting before the clock starts. Every second of recorded message is waiting the report never sees.
  • Weekly averages only. A quiet Tuesday afternoon dilutes a bad Monday morning until both look acceptable.

The honest fix for all five is the same: measure from the first ring to a person who can help, by hour block, with abandonment and voicemail beside it.

After hours: a different clock

Night calls change who answers, not what the caller expects. If your after-hours line rings the on-call tech's cell for 25 seconds and then rolls to a mailbox, the caller's speed of answer is either the time a sleeping tech takes to find the phone, or never. Measure nights separately: seconds from the first ring to a live voice, by night of the week, and the share of calls that reached voicemail. Why after-hours voicemail loses plumbing jobs explains what happens to the second group.

If nights forward to an answering service or another outside layer, time that layer the same way, from an outside phone, on a Saturday night and the night of the first hard freeze. A contract that promises a fast answer is worth exactly what your own stopwatch says.

What slow answers cost

Turn the seconds into jobs. Take the calls that were abandoned or went to voicemail in the blocks where ASA is worst, keep the share that were new work, then apply your booking rate and average ticket. In the Example below that comes to about 25 lost first visits a month, roughly $11,400, before any follow-on work. Swap in your own numbers; the missed call cost guide explains how to get clean inputs.

ExampleExample: jobs lost to slow answers
Example: worked figures
InputExample
Calls per week180
Calls abandoned or sent to voicemail (%)12%
Share of those that were new work (%)45%
Your booking rate on answered new work (%)60%
Average first-visit ticket$450
Unanswered calls a month94
From new customers42
Bookings that would have followed25
Monthly value at risk$11,364

How it is worked out: Calls a week Γ— 4.33 weeks Γ— unanswered share Γ— new-customer share Γ— booking rate Γ— average value.

Assumptions

  • Callbacks are left out because few connect: only 19% of US adults generally answer calls from unknown numbers.[4]
  • 180 calls a week, 12% abandoned or unanswered, 45% new work, a 60% booking rate and a $450 ticket are Example inputs. Use your own phone and job reports.
  • Emergency jobs can be worth far more than the first ticket; the average water damage and freezing claim was about $15,400 in 2019 to 2023.[3]

Monthly value at risk = calls per week Γ— 4.33 Γ— missed share Γ— new-work share Γ— booking rate Γ— average ticket.

Answering fast when the desk is full

Most ASA problems live in a few hours: the morning rush, lunch, the last hour of the day, evenings and weekends. Fix rota problems with rota changes, using lunch-hour phone coverage and the overflow plan for peak hours. For the hours no rota covers, set a short no-answer timer and forward the call to a layer that picks up rather than a mailbox.

An SI Employee is one such layer. It answers the calls your office forwards when lines are busy, unanswered or closed, in your business name; it takes the job details and reads them back, sends urgent calls down your on-call path and emails the office a summary with the recording and transcript. You can call it yourself and time the answer (try it). The eight-truck residential example shows how night calls would be sorted.

Example: a call that cannot wait
  • Caller
  • Your team
  • System
  • SI Employee
  1. 01Caller

    Caller dials at 8:05 a.m.

    Water under the kitchen sink; the first plumber in the results did not answer.

  2. 02Your team

    Office ring group

    Both CSRs are on calls; the desk phones ring for 15 seconds.

  3. 03System

    Forward on no answer

    The phone system forwards the call instead of queueing it behind routine calls.

  4. 04SI Employee

    SI Employee answers

    In your business name: address, ZIP, problem and callback number, read back.

  5. 05System

    On-call path starts

    Marked urgent and transferred to the on-call tech, then the backup if needed.

  6. 06Your team

    Office sees the summary

    Email with recording and transcript; a CSR follows up when free.

Example routing. Ring times are yours to set; test them from an outside phone at your busiest hour.

Frequently asked questions

What is a good average speed of answer for a plumbing company?

Aim for most calls answered within 20 seconds during staffed hours, with abandonment under 5%. Call centers commonly set service-level targets of 20 or 30 seconds[2], and 9-1-1 centers must answer 90% within 15 seconds[1]. Set your own target from two weeks of hour-block data.

Does ASA include calls that went to voicemail?

Usually not, and abandoned calls are left out too[2]. Check whether your system counts a voicemail pickup as answered; some do, which flatters both ASA and answer rate.

How is ASA different from answer rate?

Answer rate tells you how many callers reached a person. ASA tells you how long the ones who reached a person waited. A desk can post a good ASA and a poor answer rate on the same morning, because the long waiters hung up.

Should after-hours calls have the same target?

The caller's patience does not change at night, but your staffing does. The practical target is a live answer from your after-hours layer within a few rings and an urgent path that reaches a tech.

Why does our ASA look good when customers complain about waiting?

Check where the clock starts. If the report times only the queue, greeting, menu and ring-group seconds are invisible. Call in from an outside phone at your busiest hour and time it yourself.

References

  1. National Emergency Number Association (2026). NENA Standard for 9-1-1 Call Processing (NENA-STA-020.2-2026) (opens in a new tab) ↑

  2. Manufacturing & Service Operations Management (Gans, Koole and Mandelbaum) (2003). Telephone Call Centers: Tutorial, Review, and Research Prospects (opens in a new tab) ↑

  3. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑

  4. Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) ↑

  5. Google (2026). About ad rankings (Local Services Ads Help) (opens in a new tab) ↑

  6. Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 47 CFR 64.1200: Delivery restrictions (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo