Call handling

What it costs when technicians answer the phones

Price the calls your techs take on the job: billable minutes, leads that never reach the board and driving risk, with a staff-time Example and a tally.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing9 min read

On this page
  1. Where tech phone work comes from
  2. Four costs, side by side
  3. Pricing the billable minutes
  4. Leads that never reach the board
  5. The driving problem
  6. Run a one-week tally
  7. Taking the phone off the tools
  8. Example: a six-truck shop's tally
  9. Frequently asked questions
  10. References
Call handling: What it costs when technicians answer the phones3,208: people killed in distraction-related crashes in the US in 2024, with another 315,167 injuredCALL HANDLINGWhat it costs whentechnicians answer thephones3,208people killed in distraction-related crashes in theUS in 2024, with another 315,167 injuredAva for PlumbersInsightsCall handling: What it costs when technicians answer the phones3,208: people killed in distraction-related crashes in the US in 2024, with another 315,167 injuredCALL HANDLINGWhat it costs whentechnicians answerthe phones3,208people killed in distraction-relatedcrashes in the US in 2024, withanother 315,167 injuredAva for Plumbers
Figure source: Governors Highway Safety Association, 2024[1]

Key takeaways

  • When techs are the overflow line, phone work disappears from every report: the minutes are not on a timesheet and the leads are not on the board.
  • Price an interrupted minute at loaded labor cost at least: construction employers paid $51.96 per hour worked in total compensation in June 2026[2].
  • Driving is the worst place to take a call: 33 states and D.C. ban hand-held phone use for all drivers[1], and heavier trucks fall under a federal hand-held ban that binds the employer too[3][4].
  • Run a one-week tally of calls reaching tech phones before choosing a fix.
  • Move the phone off the tools: office ring groups first, overflow forwarding second, and techs only for urgent calls on the on-call path.

Where tech phone work comes from

In plenty of plumbing shops the busiest phone in the company is not on a desk. It is in a tech's back pocket, under a sink, ringing because the office forwards overflow to the field, because a customer saved the tech's cell after the last visit, or because the owner is also the lead plumber. Nobody decided that technicians would join the phone team. It happened one forwarding rule at a time.

The trouble is that this work hides. The minutes are not on a timesheet, calls to a personal cell never appear in the phone system's reports, and jobs taken that way often reach the board only when the tech remembers them at the end of the day. This guide prices the four costs, then gives you a one-week tally that produces your own numbers.

  • Overflow forwarding: the office ring group rolls to a tech's cell when the CSRs are busy or at lunch.
  • After-hours routing: the main line forwards to the on-call tech, who ends up answering routine calls along with emergencies.
  • Direct numbers: customers call the tech they liked, from a number on an old invoice or text.
  • Owner-operators and small crews: the owner answers between jobs because there is nobody else. Answering calls while working solo covers that case on its own.

Four costs, side by side

Price the first two in money. Track the last two as risk; they rarely fit a spreadsheet until something goes wrong.
CostWhat happensHow to measure it
Billable timeThe tech stops work, takes the call, writes the details down and restarts the task.Minutes per call from the tally, times calls per day, at loaded labor cost.
Lost and unlogged leadsDetails go on a scrap of cardboard or into memory; some jobs never reach the board.Calls in the tally with no matching job or customer record by the next morning.
Driving riskCalls answered or returned at the wheel, often while hurrying to the next job.Share of tally calls taken in the van, plus any phone-related tickets or incidents.
Customer experienceThe caller hears a tech mid-job, gets a rushed answer or a callback promise.Callbacks promised versus made, and complaints that mention not hearing back.

Pricing the billable minutes

Start with what an hour of a tech costs, and treat it as the floor. BLS puts the median wage for plumbers at $30.67 an hour[5]. The employer's cost is higher: construction employers paid an average of $51.96 per hour worked in total compensation in June 2026, of which $15.84 was benefits[2]. That loaded figure is the honest price of a minute spent on the phone instead of on the job.

What an hour of construction labor costs the employerAverage employer cost per hour worked, private construction industry, June 2026.
What an hour of construction labor costs the employerStacked bar chart. Wages and salaries: $36.12; Benefits: $15.84.Wages and salaries: $36.12 (70%)Benefits: $15.84 (30%)What an hour of construction labor costs the employerStacked bar chart. Wages and salaries: $36.12; Benefits: $15.84.Wages and salaries: $36.12 (70%)Benefits: $15.84 (30%)
  • Wages and salaries $36.12 70%
  • Benefits $15.84 30%

Source: U.S. Bureau of Labor Statistics, 2026[2]

Show the data
ComponentDollars per hour worked
Wages and salaries$36.12
Benefits$15.84

It is still the floor, because a tech's hour is also what you sell. Plumbing, heating and AC contractors took in about $260,000 per employee in 2022[6], office staff included, so on a full day a lost billable hour is worth more in revenue than in wages. On a slow day the cost is lower. On a day with a waiting list, a lost half hour can push the last job to tomorrow.

A call on the job also costs more than its talk time. The tech sets down the torch or the auger, strips a glove, hunts for something to write on, answers questions without the schedule in front of them, then works out where they left off. Time a few of these yourself; the restart is often longer than the call. BLS notes that plumbers routinely work in tight spaces and on ladders[5], which is exactly where a ringing phone is least welcome.

ExampleExample: tech minutes spent on calls
Example: worked figures
InputExample
Calls reaching tech phones per day (whole crew)18
Minutes per call, including the restart5
Share the office or overflow could take80%
Loaded labor cost per tech hour$51.96
Calls a month391
Staff hours on these calls33
Hours handed off26
Monthly value of that staff time$1,353

How it is worked out: Calls a day Γ— 21.7 working days Γ— minutes per call Γ· 60 Γ— share handled = hours; hours Γ— hourly cost.

Assumptions

  • Loaded labor cost uses the June 2026 average total compensation per hour worked for construction employers.[2]
  • Six techs taking three calls each a day, at five minutes per call including the restart, are Example inputs. Replace them with your one-week tally.
  • Labor cost only. Revenue lost on a full schedule is higher, given receipts of about $260,000 per employee across the industry.[6]

Monthly hours = calls per day Γ— 21.7 working days Γ— minutes Γ· 60 Γ— share moved off the techs. Example inputs.

Leads that never reach the board

The cost owners notice last is the job that never got booked. A tech in a crawlspace takes a call, says the office will ring back, and the office never hears about it. Or the address goes on a box flap and the box goes in the dumpster. There is no recording, no caller ID in the office system and no record of what was promised, so nobody can even tell the job was lost.

Calling back is weaker than it looks. In Pew's survey only 19% of US adults said they generally answer calls from unknown numbers[7], and a callback from a tech's personal cell is an unknown number to almost everyone. A caller who got a rushed answer mid-job has usually phoned someone else by the time the tech is free. The case for keeping customers on the business number is laid out in whether techs should give out their own cell numbers.

  • Every call a tech takes is logged the same day, in the system the office uses. If it is not logged, it did not happen.
  • Techs return calls through the business phone app so customers see the main number, never from a personal cell.
  • Techs hand out the main number only, and the handoff from phone to dispatch is the same whoever took the call.

The driving problem

The worst place to take a call is the driver's seat, and a tech between jobs is where many of these calls land. In 2024, 3,208 people died and another 315,167 were injured in distraction-related crashes in the US[1]. The law has moved with the numbers: 33 states and D.C. ban hand-held cellphone use for all drivers, and 49 states and D.C. ban texting for all drivers[1].

Heavier trucks carry a federal rule on top. A vehicle used in interstate commerce with a gross vehicle weight rating of 10,001 pounds or more counts as a commercial motor vehicle[4], and federal rules say no driver shall use a hand-held mobile phone while driving one, and no motor carrier shall allow or require it[3]. Check the ratings on your box trucks and heavier vans with your insurer or safety advisor. The employer half of that rule is the part owners miss: a forwarding setup that rings a driving tech all day is hard to square with it.

A policy line that works: β€œNo answering, dialing or texting while the vehicle is moving. Pull over, or let the call go to the office.” Then make sure the office, not the tech, is where unanswered calls land. A driver safety program for service vans covers the rest of the policy.

Run a one-week tally

  1. Ask every tech to log calls

    For five working days, each tech notes every business call they answer or return: time, minutes, caller type and where they were (on a job, in the van, at home).

  2. Pull the phone records

    Match forwarded calls in the phone system against the techs' logs, and note calls to personal cells the logs mention.

  3. Check what reached the board

    For each call, look for the job or customer record. Count the ones with nothing there by the next morning.

  4. Price it

    Minutes times calls times loaded labor cost, plus the value of any job that went missing at your average ticket.

  5. Find the pattern

    Group the calls by hour and source: lunch overflow, after-hours routine calls, direct calls from past customers. Each needs a different fix.

Keep the form short or nobody fills it in: a card in the van or a shared note on the phone works. If your office has never measured its own phones, run the one-week call audit in the same week so both sides of the picture match.

Taking the phone off the tools

The fix depends on what the tally shows. Lunch and morning overflow belongs to the office: stagger breaks and add a second ring group of people who are indoors, sized with how many CSRs you need. Direct calls to tech cells fade once techs hand out the main number and the office can see every call. After-hours routine calls should not wake anyone.

For calls that still have nowhere to go, point the office line's no-answer and busy forwarding at an overflow layer instead of a tech. An SI Employee can take those forwarded calls in your business name. It takes the address, ZIP, problem and callback number, reads them back, books routine work into one tested schedule or leaves a request for the office, and sends only urgent calls down the on-call path to a tech, then a backup. The summary, recording and transcript arrive by email, so the job is on record before anyone touches it. The one-van plumber example works through this for an owner who is also the only tech, and the after-hours plumbing example covers the night side.

Example: a call during a water heater swap
  • Caller
  • System
  • SI Employee
  • Your team
  1. 01Caller

    Homeowner calls main line

    Both CSRs are at lunch; this call used to forward to the nearest tech.

  2. 02System

    Forwarded to overflow

    Unanswered after 20 seconds, the phone system forwards it instead of ringing a tech.

  3. 03SI Employee

    SI Employee takes details

    Routine leak under a sink: details read back and booked into the tested schedule.

  4. 04System

    Summary to the office

    Email with recording and transcript; an urgent job would be marked urgent.

  5. 05Your team

    Tech keeps working

    No ring under the sink. Only urgent calls follow the on-call path to a tech.

Example. Urgent calls still reach a person: the on-call tech first, then a backup, then a clear no-answer step.

Example: a six-truck shop's tally

Example: a six-truck shop forwards its main line to the nearest tech's cell whenever both CSRs are busy, and regular customers often call techs directly. The tally finds about 18 business calls a day reaching tech phones, averaging five minutes each once the restart is counted, and roughly a third taken in the van. Seven calls in the week had no job or customer record the next morning, and two of those turn out to be repair jobs that went to another plumber.

In this Example about 80% of those calls could go to the office or an overflow layer, leaving genuine emergencies for the on-call tech. That is about 26 hours a month of tech time, roughly $1,350 at the loaded rate above, before the missing jobs and the van calls are counted. The owner makes three changes: a second ring group at lunch, a forwarding rule that sends unanswered calls to overflow instead of a tech, and a rule that techs give out the main number only. The same tally form is used again a month later to check what moved.

Frequently asked questions

Should technicians answer customer calls at all?

Not during jobs and never while driving. Techs should talk to the customer in front of them and take urgent calls only through the on-call path you set. Calls from customers they have served belong on the main line, where they are recorded, logged and answered by someone with the schedule open.

How do I price the time a tech spends on the phone?

Count minutes per call including the restart, multiply by calls per day and use loaded labor cost rather than the hourly wage: construction employers paid $51.96 per hour worked in total compensation in June 2026[2]. On full days, add the revenue of any work that slipped.

Is it legal for techs to take calls while driving?

It depends on the state and the vehicle. 33 states and D.C. ban hand-held phone use for all drivers[1], and drivers of commercial motor vehicles rated 10,001 pounds or more in interstate commerce are under a federal hand-held ban that also binds the employer[3][4]. Hands-free rules vary, so check your state's law and set a stricter company policy.

What about the on-call tech after hours?

The on-call tech should hear only calls that need a person tonight. Routine night calls can be taken and booked for the morning so the tech sleeps. What happens when the on-call tech doesn't answer covers the backup step.

Customers love calling our techs directly. Should we stop it?

Keep the relationship and move the number. Put the main number on every invoice and message, and have techs say β€œcall the office and ask for me.” The office logs the call and routes it to the tech when they are free.

References

  1. Governors Highway Safety Association (2024). Distracted Driving: state laws and crash data (opens in a new tab) ↑

  2. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation, Table 4: Private industry workers by occupational and industry group (June 2026) (opens in a new tab) ↑

  3. Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 49 CFR 392.82: Using a hand-held mobile telephone (opens in a new tab) ↑

  4. Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 49 CFR 390.5: Definitions (commercial motor vehicle) (opens in a new tab) ↑

  5. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  6. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) ↑

  7. Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo