Dispatch scheduling

Capacity planning: how many calls per plumbing tech per day?

Work out how many calls a plumbing tech can run per day from paid hours, job duration, drive time and an emergency reserve, then plan trucks by season.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. The question behind the question
  2. The capacity formula
  3. Job mix changes everything
  4. Hold an emergency reserve
  5. Plan capacity by season
  6. From jobs per tech to trucks needed
  7. Check capacity against revenue
  8. Overtime, Saturdays and other flex capacity
  9. Example: should the shop hire a sixth tech?
  10. Mistakes that distort the math
  11. Keep it current
  12. Frequently asked questions
  13. References
Dispatch scheduling: Capacity planning: how many calls per plumbing tech per day?Article coverDISPATCH SCHEDULINGCapacity planning: howmany calls per plumbingtech per day?Ava for PlumbersInsightsDispatch scheduling: Capacity planning: how many calls per plumbing tech per day?Article coverDISPATCH SCHEDULINGCapacity planning:how many calls perplumbing tech perday?Ava for Plumbers

Key takeaways

  • Calls per tech per day is an output of your own numbers: available hours divided by on-site time plus drive time.
  • Reserve capacity for emergencies before you fill the board, and release it at a set time.
  • Plan by season: plumbing, heating and AC employment ran from 1,305,900 in January 2026 to 1,357,800 in August[1].
  • Check capacity against revenue: the industry generated about $260,000 in receipts per employee in 2022[2].

The question behind the question

'How many calls should a tech run a day?' usually means one of three things. The owner wants to know whether the techs are busy enough, the CSR wants to know how many slots to offer, or the shop is deciding whether to hire. All three have the same answer: it depends on your job mix, your drive times and how much room you keep for emergencies. Borrowed numbers from another shop or a forum will mislead you, because their service area and work are not yours.

The good news is that the calculation is simple once you have job duration standards and a rough idea of drive time. It takes an afternoon to set up and a few minutes a week to keep current.

The capacity formula

  1. Start with paid hours

    Hours each tech is paid for on a normal day, excluding unpaid lunch.

  2. Subtract non-job time

    Morning huddle and loading, end-of-day paperwork and restocking, and a typical supply house stop.

  3. Get available hours

    What remains is the time that can be spent driving to and working on jobs.

  4. Divide by job time plus drive

    Use your median on-site time for the expected job mix, plus average drive time between jobs.

  5. Take off the emergency reserve

    Hold back a share of slots for same-day urgent work, based on how many you usually get.

  6. Round down

    Offer whole slots. Partial slots become late arrivals.

Example: capacity calculation for one fictional service tech
LineHoursNote
Paid hours9.07:00 a.m. to 4:30 p.m. less 30 min unpaid lunch
Huddle, loading, restock-0.75Start and end of day
Paperwork and supply stop-0.5Averaged across the week
Available hours7.75Driving plus on-site
Median on-site per job1.4From job history, service mix
Average drive per job0.4From GPS logs
Time per job1.8On-site plus drive
Jobs per day (before reserve)4.37.75 divided by 1.8
Bookable routine slots3One slot held for emergencies on most days

Job mix changes everything

The same tech can run seven toilet and faucet calls on a compact route one day and one water heater replacement plus a leak locate the next. Calculate capacity for the mix you actually book, not for a theoretical average.

  • Service-heavy boards (repairs, drains, fixtures): more, shorter jobs; drive time is a large share of the day.
  • Install-heavy boards (water heaters, fixture packages): fewer, longer jobs; drive time matters less, lift and crew size matter more.
  • Emergency-heavy days: plan fewer pre-booked slots and a larger reserve.
  • Maintenance visits: predictable and short, good filler around emergencies.
  • Mixed boards: calculate service and install capacity separately and keep them on separate boards.

If your techs differ a lot in experience, calculate capacity per tech level. A lead and a second-year apprentice do not have the same median job time.

Hold an emergency reserve

A board packed completely with routine work has no room for the burst pipe that arrives at 10 a.m. The emergency reserve is capacity you deliberately leave open each morning. Size it from history: count same-day urgent calls by weekday over the last few months and hold enough slots for a busy day, not an average one.

Release unused reserve at a fixed time, such as 1 p.m., to routine calls waiting for an earlier slot. That keeps techs busy without breaking the promise to emergency callers. BLS notes plumbers' work often includes nights and weekends[3]; the after-hours reserve is the on-call rotation, which needs its own capacity check.

Plan capacity by season

Demand and staffing both move with the seasons. Employment at plumbing, heating and AC contractors rose from 1,293,700 in January 2025 to 1,335,400 in July, eased to 1,317,700 in December[1], then reached 1,357,800 in August 2026[1].

Plumbing, heating and AC contractor employment by monthAll employees, not seasonally adjusted. 2026 figures preliminary.
Plumbing, heating and AC contractor employment by monthColumn chart. Jan 2025: 1,294 thousand; Jul 2025: 1,335 thousand; Dec 2025: 1,318 thousand; Jan 2026: 1,306 thousand; Aug 2026: 1,358 thousand; Sep 2026: 1,347 thousand.0 thousand500 thousand1,000 thousand1,500 thousandJan 2025: 1,294 thousand1,294 thousandJan 2025Jul 2025: 1,335 thousand1,335 thousandJul 2025Dec 2025: 1,318 thousand1,318 thousandDec 2025Jan 2026: 1,306 thousand1,306 thousandJan 2026Aug 2026: 1,358 thousand1,358 thousandAug 2026Sep 2026: 1,347 thousand1,347 thousandSep 2026Plumbing, heating and AC contractor employment by monthColumn chart. Jan 2025: 1,294 thousand; Jul 2025: 1,335 thousand; Dec 2025: 1,318 thousand; Jan 2026: 1,306 thousand; Aug 2026: 1,358 thousand; Sep 2026: 1,347 thousand.Jan 2025Jan 2025: 1,294 thousand1,294 thousandJul 2025Jul 2025: 1,335 thousand1,335 thousandDec 2025Dec 2025: 1,318 thousand1,318 thousandJan 2026Jan 2026: 1,306 thousand1,306 thousandAug 2026Aug 2026: 1,358 thousand1,358 thousandSep 2026Sep 2026: 1,347 thousand1,347 thousand

Source: U.S. Bureau of Labor Statistics, Current Employment Statistics, 2025[1]

Show the data
MonthEmployees (thousands)
Jan 20251,294 thousand
Jul 20251,335 thousand
Dec 20251,318 thousand
Jan 20261,306 thousand
Aug 20261,358 thousand
Sep 20261,347 thousand

Your own call volume will show a sharper pattern than the industry headcount. Pull bookings by week for the last two years and mark the peaks: freezes, holidays, summer remodels. Plan overtime, vacations and hiring around them rather than reacting after the board is already full.

From jobs per tech to trucks needed

  1. Forecast weekly job demand by month from your booking history, adjusted for growth or marketing changes.
  2. Divide by bookable jobs per tech per week (daily slots times working days).
  3. Add coverage for vacations, sick days and training. Size this cover from last year's records of vacation, sick and training days.
  4. Compare with your current headcount for each month.
  5. Decide where to close the gap: overtime, a seasonal hire, an apprentice, or turning down low-value work in peak weeks.

Hiring takes months. Apprentices typically log about 2,000 hours of paid on-the-job training a year[3], so a new apprentice adds partial capacity at first and grows into a full slot count over time. Plan that ramp into the forecast.

Check capacity against revenue

Capacity is only useful if the work pays. Census data shows plumbing, heating and AC contractors generated about $260,000 in receipts per employee in 2022[2], with payroll equal to about 27% of receipts[2]. Your numbers will differ by market and work type, but the comparison is worth making: multiply bookable jobs per tech by your average ticket and working days, and see whether the result supports the tech's fully loaded cost with room for overhead and profit. Remember that wages are not the whole cost: benefits made up 30.0% of private-industry employer compensation costs in June 2026[4].

If it does not, the answer is rarely 'run more calls'. It is usually a pricing, job mix or drive time problem, and pushing more calls into the day just creates late arrivals and callbacks.

Overtime, Saturdays and other flex capacity

Not every gap needs a hire. Short peaks can be covered with flex capacity, as long as you plan it rather than discover it at 4 p.m. Common options are planned overtime on known peak days, a rotating Saturday shift, moving maintenance visits out of peak weeks, and borrowing install techs for service when installs are light. Each has limits. Overtime that becomes routine wears techs down and raises callbacks; Saturday shifts need willing techs and customers who want weekend slots.

Write down how much flex capacity you can safely add per week, by type, and use it as part of the capacity plan. When the forecast gap is bigger than the flex for more than a few weeks, that is the signal to hire.

Example: should the shop hire a sixth tech?

Example (fictional): a five-tech shop books about three routine slots per tech per day plus one emergency reserve slot, roughly 20 routine jobs a day. Booking history shows demand of 23 to 26 routine jobs a day from May to September, with routine customers waiting four or five days for a slot.

Example, continued: the gap is three to six jobs a day for five months, about one tech's worth. The owner hires a journeyman in April rather than relying on overtime, and plans for the new tech to take fewer slots for the first month while learning the service area. In winter, the extra capacity goes to the emergency reserve during freeze weeks and to maintenance visits.

Mistakes that distort the math

  • Using average job time instead of a median or percentile, which lets a few long jobs inflate every slot.
  • Ignoring drive time, or using straight-line distance instead of real drive time.
  • Counting paid hours that are actually spent loading, restocking and on paperwork.
  • Planning every tech as if they were the fastest lead.
  • Never releasing the emergency reserve, so slots sit empty while customers wait.

Two related measures complete the picture: technician utilization rate shows how much of paid time is spent on billable work, and using GPS to send the closest qualified tech covers cutting drive time during the day.

Keep it current

Recalculate capacity each month from the latest job durations and drive times, and each season from your demand forecast. Share the numbers with your CSRs, so the slots they offer match what the techs can deliver, and with your techs, so they see the logic behind their day. A capacity plan nobody sees is just a spreadsheet.

Frequently asked questions

How many calls can a plumber do in a day?

It depends on job mix, drive time and the emergency reserve. Divide available hours by median on-site time plus drive time for your typical jobs, then hold back slots for same-day emergencies.

Should every tech have the same number of slots?

No. Calculate by tech level and job mix. Leads finish complex jobs faster, and apprentices need more time as they learn.

How big should the emergency reserve be?

Size it from your own history of same-day urgent calls by weekday, planning for a busy day, and release unused slots to routine work at a fixed time.

How do I know when to hire another plumber?

Forecast demand by month, divide by bookable jobs per tech and compare with headcount. A gap of about one tech's capacity for several months is a strong signal, given how long hiring takes.

References

  1. U.S. Bureau of Labor Statistics, Current Employment Statistics (2025). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822001) (opens in a new tab) โ†‘

  2. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo