Pricing estimates

Pricing commercial plumbing service work

Rate cards, not-to-exceed amounts and net payment terms for commercial plumbing clients, with a worked example and the paperwork facility buyers expect.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Commercial clients buy differently
  2. Who you are competing with
  3. Build a commercial rate card
  4. Not-to-exceed amounts that actually protect you
  5. Flat prices for defined, repeatable tasks
  6. Net terms without becoming the client's bank
  7. Paperwork that wins and keeps accounts
  8. Healthcare and other high-risk buildings
  9. Review every account each quarter
  10. Frequently asked questions
  11. References
Pricing estimates: Pricing commercial plumbing service workArticle coverPRICING ESTIMATESPricing commercialplumbing service workAva for PlumbersInsightsPricing estimates: Pricing commercial plumbing service workArticle coverPRICING ESTIMATESPricing commercialplumbing service workAva for Plumbers

Key takeaways

  • Commercial buyers want predictable cost and clean paperwork more than the lowest hourly rate.
  • Publish a rate card with clear categories for standard, after-hours, holiday, crew size, travel and minimums.
  • A not-to-exceed amount protects both sides only if the tech stops and calls before crossing it.
  • Net terms are a credit decision: run a credit check, put late terms in writing and track days to payment by account.

Commercial clients buy differently

A homeowner buys a repair. A facility manager, property manager or general contractor buys a process. They need a purchase order before work starts, an invoice that matches it, proof of insurance on file, a service report they can forward to their boss and a price they can budget for. A shop that prices commercial work like residential work, a flat-rate number on a tablet and payment on the spot, usually loses the account or loses money on it.

Commercial pricing rests on three tools: a rate card, not-to-exceed amounts for unknown repairs, and payment terms. Get those right and the hourly number matters less than you think. Get them wrong and even a high rate will not save the margin.

Who you are competing with

The commercial side of the trade includes some very large firms. In 2022, just 215 plumbing, heating and AC contractor firms had 500 or more employees, yet they earned about 22% of the industry's receipts[1]. Firms with fewer than 20 employees, about nine in ten firms, earned 29%[1]. Large competitors bring national account programs, dedicated coordinators and software portals.

Share of industry receipts by firm sizePlumbing, heating and AC contractors, 2022. The middle group is the remainder of the two published shares.
Share of industry receipts by firm sizeStacked bar chart. Fewer than 20 employees: 29%; 20 to 499 employees: 49%; 500 or more employees: 22%.Fewer than 20 employees: 29% (29%)20 to 499 employees: 49% (49%)500 or more employees: 22% (22%)Share of industry receipts by firm sizeStacked bar chart. Fewer than 20 employees: 29%; 20 to 499 employees: 49%; 500 or more employees: 22%.Fewer than 20 employees: 29% (29%)20 to 499 employees: 49% (49%)500 or more employees: 22% (22%)
  • Fewer than 20 employees 29%
  • 20 to 499 employees 49%
  • 500 or more employees 22%

Source: U.S. Census Bureau, 2022[1]

Show the data
ItemValue
Fewer than 20 employees29%
20 to 499 employees49%
500 or more employees22%

A smaller shop competes on response time, the same technician every visit, and paperwork that is right the first time. Those strengths are easier to sell when your pricing is just as clear as the big firm's.

Build a commercial rate card

Start from your loaded labor cost. Average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[2], and across private industry benefits make up about 30% of total compensation[3]. Add payroll taxes, insurance, vehicle, tools, office and the share of overhead each billable hour must carry, then your target margin. The result is a cost-based hourly rate for a journeyman; set the other categories from it.

Categories for a commercial plumbing rate card. Set the numbers from your own costs.
Rate categoryWhen it appliesWhat to state on the card
Standard hourlyWeekday business hoursHours covered and the rate per technician hour
After-hoursEvenings and weekendsExact hours, and whether it applies from dispatch or arrival
HolidayListed holidays onlyThe list of holidays, published in advance
Apprentice or helperSecond person on the crewRate per hour and when a second person is required
TravelTrip to and from siteFlat trip charge or portal-to-portal time
Minimum chargeShort visitsMinimum hours billed per visit
MaterialsAll parts and suppliesMarkup method and how special orders are handled
EquipmentJetter, camera, lifts, excavationDaily or per-use rates

Send the rate card with every proposal and attach it to every service agreement. When a dispute comes up six months later, the signed card ends it quickly.

Not-to-exceed amounts that actually protect you

Facility buyers often issue a purchase order with a not-to-exceed amount for diagnostic and repair work they cannot scope in advance. It is a reasonable request, and it works well when your team follows a strict routine.

  1. Agree the amount and what it covers

    Confirm whether the not-to-exceed amount covers labor only or labor plus materials, and whether trip charges sit inside it.

  2. Track time against it on site

    The technician sees the running total on the job, including materials used so far.

  3. Stop at a set threshold

    At a threshold you set in advance, for example four-fifths of the amount, the technician stops and calls the client contact with findings and a revised estimate.

  4. Get the change in writing

    Proceed only after an updated PO number or a written approval by email or portal. Note who approved it and when.

  5. Invoice to the PO

    List the PO number, the approved amount and any approved changes on the invoice so accounts payable can match it without calling you.

Example (fictional): a property manager issues a $750 not-to-exceed PO for a leaking flush valve and a slow restroom drain. After 1.5 hours and $210 in parts, the tech is at about $600 and finds a corroded supply stop that needs replacing. He calls, explains, and receives an email approval for an extra $280. The invoice shows the original PO, the approval and the final total of $860.

Flat prices for defined, repeatable tasks

Hourly billing is the norm for commercial service calls, but some commercial work is predictable enough for flat prices, and buyers like them because they can budget per task. Good candidates share three traits: the scope is the same every time, access is known in advance, and the failure modes are few.

  • Annual backflow testing per device, with retest and repair priced separately.
  • Scheduled water heater flushes for multifamily buildings, priced per unit with a minimum per visit.
  • Grease line jetting on a set schedule, priced per visit from the first camera inspection.
  • Fixture rebuild kits for restroom flush valves and faucets, priced per fixture.
  • Make-ready plumbing checks for apartment turnovers, priced per unit with a list of what is included.

Write the scope of each flat price on one line and list what moves a job back to hourly, such as a failed device that needs replacement or a unit that is inaccessible on the scheduled day. Review the actual time on flat-priced tasks twice a year; the margin on predictable work erodes quietly when sites change hands or equipment ages.

Net terms without becoming the client's bank

Most commercial clients pay on terms, often 30 days or longer, and some will ask for more. Treat terms as a credit decision, not a courtesy. Every week a large invoice sits unpaid, you are paying your crew and your supplier with your own money.

  • Use a short credit application for new commercial accounts, with trade references and the accounts payable contact.
  • Put payment terms, late charges where your state allows them, and your right to pause non-emergency work on the rate card and the agreement.
  • Invoice the day the job closes, with the PO number, the service report and photos attached.
  • Track days to payment by account each month, and review terms for any account that consistently pays late.
  • Offer card or electronic payment for small commercial invoices so they do not wait in a monthly check run.

Government work has its own rules. Under the federal Prompt Payment Act, agencies that pay a vendor late must in most cases pay interest; the Treasury's Prompt Payment interest rate for July 1 to December 31, 2026 is 4.75%[4]. State and local governments often have their own prompt payment laws, so check the terms in each contract.

Paperwork that wins and keeps accounts

  1. Certificate of insurance naming the client as additional insured when the contract requires it, renewed before it expires.
  2. W-9 and vendor setup forms returned within a day of the request.
  3. Service reports with the problem, the cause, the work done, photos and any recommendations, written for a reader who was not there.
  4. Lien waivers or releases when the client or lender requires them.
  5. Quotes for recommended work sent separately from the invoice, so they reach the person who approves capital spending.

Price the time this takes. A commercial invoice can carry twenty minutes of office work that a residential ticket never needs; the rate card or the trip charge should cover it.

Healthcare and other high-risk buildings

Hospitals, senior living and other healthcare buildings ask for more documentation because the stakes are higher. CDC reports that about 1 in 4 people who get Legionnaires' disease during a healthcare facility stay die[5]. Facilities with water management programs may need you to log temperatures, flushing and any work that disturbs the system.

Do not treat that as unpaid extra. Add a documented line for water management tasks, include time for infection-control precautions where the facility requires them, and agree in advance how after-hours access works in occupied buildings.

Review every account each quarter

Commercial accounts drift. A building that was profitable at last year's rate may now need longer visits, more paperwork or slower payment. Once a quarter, look at each larger account and ask four questions: what did we bill, what did it cost us in labor and materials, how long did payment take, and how much unbilled office time did it absorb. Raise rates, change terms or adjust the minimum where the answers show a problem, and give the client notice in writing before the change takes effect.

For accounts that buy recurring service, a planned maintenance agreement often works better than ad hoc calls; see commercial preventive maintenance contracts.

Frequently asked questions

Should commercial work be priced flat rate or hourly?

Most commercial service work is billed hourly from a rate card, because scope is often unknown and buyers want to see time. Flat prices work for defined, repeatable tasks inside a maintenance agreement.

What is a not-to-exceed amount?

It is the most a client has approved for a job without further authorization. Your technician should stop and call before reaching it and continue only with written approval.

How long should payment terms be?

Many shops offer 30 days to approved commercial accounts. Longer terms should come with a credit check, larger accounts or a higher rate to cover the cost of waiting.

Can I charge late fees to commercial clients?

Often yes, if the terms are in the signed agreement and allowed by your state. Ask your attorney to review the wording once.

References

  1. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ†‘

  4. Bureau of the Fiscal Service, U.S. Department of the Treasury (2026). Prompt Payment (opens in a new tab) โ†‘

  5. Centers for Disease Control and Prevention (2026). About Legionnaires' Disease (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo