Pricing estimates

Offering customer financing on plumbing jobs

How plumbing financing programs work, what dealer fees cost you, when to present a monthly option, and scripts that keep the offer honest and compliant.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why financing decides big plumbing jobs
  2. How contractor financing programs work
  3. Dealer fees: price for them honestly
  4. When and how to present financing
  5. Compliance basics
  6. Choosing a financing partner
  7. Measure whether it is working
  8. Frequently asked questions
  9. References
Pricing estimates: Offering customer financing on plumbing jobsArticle coverPRICING ESTIMATESOffering customerfinancing on plumbingjobsAva for PlumbersInsightsPricing estimates: Offering customer financing on plumbing jobsArticle coverPRICING ESTIMATESOffering customerfinancing on plumbingjobsAva for Plumbers

Key takeaways

  • More than a third of US adults would not cover a $400 surprise expense with cash or its equivalent, so financing decides many large plumbing jobs.
  • Contractor financing is paid for through a dealer or merchant fee deducted from what the lender funds you; promotional plans usually cost more.
  • Present financing to every customer as one of the options on the proposal, not as a rescue after an objection.
  • Advertising a monthly payment can trigger federal disclosure rules, so keep marketing wording simple and approved.

Why financing decides big plumbing jobs

A failed water heater, a sewer line replacement or a repipe rarely arrives on a schedule. The homeowner did not plan for it, and many cannot pay for it from savings on the day. The Federal Reserve's survey of household finances found that 63% of adults would cover a hypothetical $400 emergency expense entirely with cash or its equivalent, unchanged for three years and down from 68% in 2021[1]. That leaves 37% who would borrow, sell something or could not pay; 12% of all adults said they could not cover it by any means[1].

Adults who would cover a $400 emergency expense with cash or its equivalentCash, savings or a credit card paid off at the next statement.
Adults who would cover a $400 emergency expense with cash or its equivalentColumn chart. 2021: 68%; 2022: 63%; 2023: 63%; 2024: 63%; 2025: 63%.0%20%40%60%80%2021: 68%68%20212022: 63%63%20222023: 63%63%20232024: 63%63%20242025: 63%63%2025Adults who would cover a $400 emergency expense with cash or its equivalentColumn chart. 2021: 68%; 2022: 63%; 2023: 63%; 2024: 63%; 2025: 63%.0%20%40%60%80%2021: 68%68%20212022: 63%63%20222023: 63%63%20232024: 63%63%20242025: 63%63%2025

Source: Board of Governors of the Federal Reserve System, 2026[1]

Show the data
ItemValue
202168%
202263%
202363%
202463%
202563%

Major home repairs are common, too. In the same survey, 22% of adults reported a major house or appliance repair in the prior 12 months, and the typical amount paid for the most common unexpected expenses was $1,000 to $1,999[1]. Many plumbing replacements cost more than that. When a customer cannot see how to pay, the job is lost, delayed until it becomes an emergency, or handed to whoever offers a payment plan.

Delay has its own cost. A slow leak or a failing supply line that waits for payday can become a flood, and the average homeowners insurance claim for water damage and freezing was $15,400 over 2019 to 2023[2]. Offering a way to pay is often the difference between a planned repair and a much larger loss for the customer.

How contractor financing programs work

  1. You sign up with a lender or platform

    The lender reviews your business, sets your plan options and gives you a way to submit applications: a link, a tablet app or a portal.

  2. The customer applies

    Usually on their own phone or on the tech's tablet, often with a decision in minutes. The customer's agreement is with the lender, not with you.

  3. The job is completed and signed off

    Most programs fund after the customer confirms completion, sometimes with a partial draw for larger projects.

  4. The lender pays you, minus a fee

    The lender sends the job amount minus a dealer or merchant fee, which is how the lender earns money on low-rate or promotional plans.

  5. The customer repays the lender

    You are out of the collection loop. Disputes about the work still come back to you, so the job paperwork matters.

Plan types differ mainly in who pays for the cost of credit. A plan with a low or zero promotional rate shifts more of that cost to you through a higher fee. A standard-rate plan costs you less and the customer more. Most programs let you offer a menu, and you choose which plans appear on your proposals.

Common contractor financing plan types. Fees and terms vary by lender and change often.
Plan typeWhat the customer seesCost to youBest use
Standard rate, long termLowest monthly payment, interest at the stated APRLowest dealer feeLarge replacements where monthly payment matters most
Reduced rateLower APR than standard for a set termModerate feeMid-size jobs where customers compare rates
Deferred interest promotionNo interest if paid in full by the deadline; interest back to the start if notHigher feeCustomers who expect to pay off quickly; explain the deadline clearly
Same-as-cash short termPay the balance within a short period without interestFee varies by termEmergency repairs bridging to an insurance payout or paycheck

Dealer fees: price for them honestly

The dealer fee is a real cost of sale, like a card processing fee. Ignoring it means your most expensive jobs carry your thinnest margins. There are two ways to handle it, and your lender agreement and state law decide which is open to you.

  1. Build an average fee into all prices. Estimate how much of your replacement revenue is financed and at what average fee, and include that cost in your price book for the job types where financing is common. Everyone pays the same price, cash or financed.
  2. Offer a cash discount. Some shops price at the financed level and offer a stated discount for cash or check. Read your lender agreement first; many prohibit charging financed customers more than cash customers, and some states regulate how discounts and surcharges are described.

Example (fictional): a shop finances about 30% of its replacement revenue, with an average dealer fee of 6% on those jobs. The blended cost is about 1.8% of replacement revenue, so it adds that amount to replacement prices in its price book. A sewer replacement priced at $9,000 before the change now carries about $160 more to cover financing across all customers.

Recheck the numbers every quarter. Promotional plans tend to grow in popularity once techs see they close jobs, and the blended fee climbs with them.

When and how to present financing

The most common mistake is presenting financing only after the customer reacts to the price. By then it sounds like a rescue, and the customer wonders what else you are holding back. Put a monthly option on every proposal above a set amount, next to the total, for every customer. Consistency is also fairer: offering financing to some customers and not others, based on how they look or where they live, invites complaints.

  • On the proposal: Each option shows the total price and, where available, an estimated monthly payment, with a note that terms depend on credit approval.
  • While presenting: Some customers prefer to spread the cost. If that is helpful, this option is also available as a monthly payment, subject to approval. It takes a few minutes on your phone.
  • If asked about interest: There are a few plans. This one has a lower monthly amount with interest; this one has no interest if paid in full by the date shown. I will show you the exact terms before you agree.
  • If declined by the lender: I am sorry it did not go through. We can look at the repair-only option, or I can hold this price for you while you consider other ways to pay.

Never pressure a customer to apply, never fill in the application for them, and never describe approval as guaranteed. Let the lender's screens explain the terms, and give the customer time to read them.

Compliance basics

Financing marketing is regulated. Under Regulation Z, an advertisement that states a triggering term, such as the number of payments, the amount of any payment or the amount of a down payment, must also disclose the down payment, the full terms of repayment and the annual percentage rate[3]. A truck wrap that says only financing available is far simpler than one that says just $99 a month.

Have your lender approve any marketing that mentions payments, rates or terms, and keep the approval on file. The detailed rules, with examples of compliant wording, are in our guide to advertising financing.

Choosing a financing partner

  • Plan menu: does it offer both standard and promotional plans, and can you choose which ones appear?
  • Approval range: does it serve customers with a wide range of credit profiles, or only prime borrowers?
  • Speed: how fast is the decision, and how soon after completion are you funded?
  • Fees: get the full fee schedule in writing, including how and when fees can change.
  • Integration: can applications start from your field software or proposal tool?
  • Marketing support: does the lender provide pre-approved wording and review your ads?
  • Complaints: how does the lender handle customer disputes about the work, and what does it expect from you?

Measure whether it is working

Track financing as part of your sales numbers, not as a side program. Each month, look at the share of proposals where financing was offered, the application rate, the approval rate, the close rate on financed versus cash jobs, the average ticket on each, and the blended dealer fee. Card payments are already common, accounting for 35% of US consumer payments by number in 2024[4], so the goal is not to push credit but to make sure every customer sees a way to pay before they decide.

If close rates on large proposals rise and the blended fee stays inside what your prices cover, the program is working. If techs only mention financing after objections, retrain before you judge the results.

Frequently asked questions

Do I have to offer financing to every customer?

It is good practice to present it the same way to every customer above a set job size. Selective offers feel unfair and can create fair-lending concerns.

Who collects if the customer stops paying the lender?

With third-party contractor financing, the lender does. Your exposure is mainly disputes about the work, so keep signed completion records and photos.

Can I charge financed customers more?

Check your lender agreement and state law first. Many agreements prohibit charging financed customers more than cash customers; a blended cost in your normal prices avoids the issue.

Should techs mention financing on repair calls?

Mention it whenever you present a replacement option or a large repair, as part of the proposal, not only when the customer hesitates.

References

  1. Board of Governors of the Federal Reserve System (2026). Economic Well-Being of U.S. Households in 2025 (opens in a new tab) โ†‘

  2. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

  3. Consumer Financial Protection Bureau (2026). 12 CFR 1026.24 Advertising (Regulation Z, Truth in Lending) (opens in a new tab) โ†‘

  4. Federal Reserve Financial Services (2025). 2025 Diary of Consumer Payment Choice (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo