Pricing estimates

How to write a plumbing estimate customers approve

The parts of a plumbing estimate customers approve: problem, scope, photos, options, exclusions and terms, plus an example and a pre-send checklist.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. What an approvable estimate looks like
  2. The sections, in order
  3. Describing the problem so it lands
  4. Options without confusion
  5. Exclusions and assumptions
  6. Terms that prevent disputes
  7. An example estimate, condensed
  8. Why clarity shows up in reviews
  9. Send it before you leave
  10. Pre-send checklist
  11. Frequently asked questions
  12. References
Pricing estimates: How to write a plumbing estimate customers approveArticle coverPRICING ESTIMATESHow to write a plumbingestimate customersapproveAva for PlumbersInsightsPricing estimates: How to write a plumbing estimate customers approveArticle coverPRICING ESTIMATESHow to write aplumbing estimatecustomers approveAva for Plumbers

Key takeaways

  • A good estimate reads in two minutes on a phone: the problem, the fix, the options, what is not included and how to say yes.
  • Photos do more persuading than paragraphs; include the problem, the equipment label and the area of work.
  • Write exclusions and assumptions plainly. Most disputes come from scope the customer assumed was included.
  • Know the cancellation rules: the FTC Cooling-Off Rule gives buyers until midnight of the third business day to cancel many home sales of $25 or more[1].
  • Clarity protects reputation: 54% of people who read online reviews pay more attention to extremely negative ones[2].

What an approvable estimate looks like

Customers approve estimates they understand. That sounds obvious, but many plumbing estimates are a list of part numbers and a total, or a paragraph of trade language that only another plumber could follow. Preparing cost estimates is one of the listed core duties of plumbers[3], and the written estimate is where that skill becomes visible to the customer.

Most customers will read the estimate on a phone. In 2026, 91% of US adults owned a smartphone, and 16% relied on one for internet access without home broadband[4]. Write for a small screen: short sections, clear headings, photos and one obvious way to approve.

The sections, in order

  1. Header

    Company name, license number where required, estimate number, date, validity period, customer name, service address and the tech who prepared it.

  2. The problem

    Two or three sentences in plain language: what the customer reported, what the tech found and why it matters.

  3. Photos

    The problem, the equipment data plate, the area of work and anything that affects scope, such as access or corrosion beyond the repair.

  4. Options

    Up to three options, each with a one-line description, what is included, the warranty and the price.

  5. Scope of work

    For the chosen option: what will be done, step by step, including removal, disposal, testing and clean-up.

  6. Exclusions and assumptions

    What is not included and what the price assumes, such as no wall opening, working shutoffs or permit fees listed separately.

  7. Terms

    Validity, deposit, payment timing, warranty, how changes are handled and any required cancellation notice.

  8. How to approve

    A clear signature or approval button, with the next step: scheduling, deposit or start date.

Describing the problem so it lands

The problem section does the most work and gets the least attention. Customers approve repairs when they understand what is wrong and what happens if they wait. Write it as you would explain it at the kitchen table.

  • Weak: “WH failed, T&P weeping, recommend R&R.”
  • Strong: “Your water heater is twelve years old and the relief valve is leaking, which means the tank is building up too much pressure. The bottom of the tank is rusted. It is likely to fail completely, and when tanks fail they can leak a lot of water quickly.”
  • Always link to a photo: “See photo 2, rust at the base of the tank.”
  • State facts, not fear. Avoid words like “dangerous” unless there is a real safety issue, and if there is, say so specifically.

Options without confusion

Most repairs can be offered at more than one level, and options help customers feel in control. Keep them honest: every option must fix the problem properly. The good-better-best guide explains how to build them. On the estimate itself:

  1. Show options side by side, not on separate pages.
  2. Give each a plain name rather than a part number.
  3. List what changes between options in two or three bullet points: life expectancy, warranty, efficiency or convenience.
  4. Mark a recommendation only if you can explain it in one sentence based on what the customer told you.
  5. Show the price for each option clearly, including any required add-ons, so the total is never a surprise.

Exclusions and assumptions

Exclusions protect both sides. A customer who reads them before signing will not feel misled later, and the shop has a clear basis for a change order if hidden conditions appear.

Common exclusions and assumptions for plumbing estimates (example wording)
ItemExample exclusion or assumption wording
Wall and floor accessPrice assumes access through the existing panel. Drywall repair and painting are not included.
ShutoffsPrice assumes the main shutoff works. If it fails, replacement is quoted separately.
Permits and inspectionPermit fees are listed separately and passed through at cost.
Hidden conditionsIf damaged pipe is found beyond the quoted area, we will stop, show you and quote before continuing.
Code upgradesCode-required items found during the work, such as an expansion tank, are listed as required add-ons.
RestorationLandscaping, concrete and finished surfaces are restored as described in the scope only.

In older homes, note pipe materials you see. EPA says lead pipes are more likely in older cities and homes built before 1986[5]. If the service line or interior piping might be lead, say what you observed and what you recommend, and keep it outside the quoted scope unless it is included.

Terms that prevent disputes

  • Validity: how long the price stands and what locks it in. See how long a plumbing quote should stay valid.
  • Deposit and payment: when payment is due, what methods you accept and whether a deposit is refundable.
  • Warranty: what is covered, for how long and what voids it. Separate workmanship from manufacturer warranties.
  • Changes: how additional work is approved, in writing, before it is done.
  • Cancellation: the cancellation rights that apply and how to exercise them.

Cancellation rules deserve care. Under the FTC’s Cooling-Off Rule, buyers generally have until midnight of the third business day to cancel sales of $25 or more made at their home, and the seller must provide a copy of the contract or receipt and two copies of a cancellation form[1]. The FTC lists exclusions, including sales needed to meet an emergency and repairs or maintenance the buyer asked the seller to come and do, but items sold beyond that request are covered[1]. A customer who called about a dripping faucet and then signs for a repipe at the kitchen table may well have that right. Many states add their own home-solicitation and home improvement contract rules, so check with counsel and put the right notice on your estimate template.

An example estimate, condensed

Example (fictional): Problem: the 12-year-old gas water heater in the garage is leaking from the relief valve and the base of the tank is rusted (photos 1 to 3). It is likely to fail. Option A: replace with a standard 40-gallon gas tank to code, including new gas connector, expansion tank service, removal and disposal; 6-year tank warranty, 1-year labor. Option B: as A with a longer-warranty tank and new shutoff valve; 10-year tank, 2-year labor. Option C: high-efficiency unit with new venting as described; 12-year warranty, 3-year labor. Excludes: drywall repair, permit fee listed separately. Valid 15 days. Approve below to choose an install date.

The whole thing reads in under two minutes and answers the questions customers usually call back to ask. Prices sit beside each option on the actual document, drawn from the price book so every tech quotes the same job the same way.

Why clarity shows up in reviews

Surprise charges and scope arguments are among the quickest routes to a bad review, and negative reviews carry extra weight. In Pew Research Center’s survey, 54% of people who read online reviews said they pay more attention to extremely negative reviews, compared with 43% who pay more attention to extremely positive ones[2].

Review readers who pay more attention to extreme reviews
Review readers who pay more attention to extreme reviewsComparison. Extremely negative reviews: 54%; Extremely positive reviews: 43%.54%Extremely negative reviewsExtremely negative reviews: 54%43%Extremely positive reviewsExtremely positive reviews: 43%Review readers who pay more attention to extreme reviewsComparison. Extremely negative reviews: 54%; Extremely positive reviews: 43%.54%Extremely negative reviewsExtremely negative reviews: 54%43%Extremely positive reviewsExtremely positive reviews: 43%

Source: Pew Research Center, 2016[2]

Show the data
ItemValue
Extremely negative reviews54%
Extremely positive reviews43%

A clear estimate is the cheapest reputation protection a plumbing business has. When the invoice matches the estimate the customer approved, there is nothing to complain about.

Send it before you leave

Estimates sent from the driveway are read while the visit is fresh. Estimates sent two days later compete with everything else in the customer’s week. Where possible, build the estimate on the tablet during the visit, walk the customer through it at the kitchen table and send it before leaving.

For larger jobs that need office input, such as permits, restoration subcontractors or engineering, tell the customer when the estimate will arrive and keep that promise. Send it as a link the customer can open on a phone, with the option to approve electronically, and make sure the office can see that it was sent and opened.

Pre-send checklist

  1. Customer name, address and contact details are correct.
  2. The problem is described in plain language with photos referenced.
  3. Each option fixes the problem and has a clear price and warranty.
  4. Required items, such as code upgrades, are included or listed as required.
  5. Exclusions and assumptions are written out.
  6. Validity, deposit, payment and cancellation terms are present.
  7. The approve button or signature line works and says what happens next.
  8. The estimate is saved to the job record for follow-up.

Once it is sent, the follow-up begins. The cadence and scripts are in following up on unsold plumbing estimates, and the costs of producing estimates in the first place are in the hidden cost of free estimates.

Frequently asked questions

What should a plumbing estimate include?

The problem in plain language, photos, options with prices and warranties, the scope of work, exclusions and assumptions, terms covering validity, deposit, payment and cancellation, and a clear way to approve.

Do plumbing estimates need a cancellation notice?

It depends on how and where the sale is made. The FTC Cooling-Off Rule covers many sales of $25 or more made at the buyer's home, with exclusions, and many states have their own rules. Check with counsel and build the right notice into your template.

Should estimates show part numbers and labor hours?

Most residential customers do not need them. Describe the work and what is included in plain language, and keep part details in the job record for your team.

References

  1. Federal Trade Commission (2026). Buyer's Remorse: The FTC's Cooling-Off Rule May Help (opens in a new tab) ↑

  2. Pew Research Center (2016). Online Reviews (Online Shopping and E-Commerce) (opens in a new tab) ↑

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  4. Pew Research Center (2026). Mobile Fact Sheet (opens in a new tab) ↑

  5. U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo