Key takeaways
- A far-out call costs vehicle miles and unbillable tech time both ways; the IRS business mileage rate is a useful check on the vehicle part.
- Zones based on drive time are easier to explain and dispatch than per-mile charges.
- Tell the caller the zone and the charge before dispatch, and put the same zones on your website and booking confirmation.
- Grouping rural calls into planned days often saves more than the trip charge recovers.
The hidden cost of the long drive
A call 45 minutes from the shop can look like any other ticket on the board. It is not. The tech spends an hour and a half or more driving, the van burns fuel and wears tires, and the next customer waits longer. If the invoice is priced like a call around the corner, the far-out customer is being subsidized by everyone else. Travel is built into the trade: BLS notes that some plumbers travel to worksites every day[1], and for a service company every one of those drives is paid time.
Vehicle cost is easy to underestimate. The IRS standard mileage rate for business use, a widely used benchmark for the full cost of running a vehicle, rose to 76 cents a mile for July 1 to December 31, 2026, from 72.5 cents in the first half of the year and 70 cents in 2025[2]. Labor is the bigger part: average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[3], and drive time is paid time with nothing to bill against it.
Source: Internal Revenue Service, 2026[2]
Show the data
| Period | Value |
|---|---|
| 2023 | 65.5 cents |
| 2024 | 67 cents |
| 2025 | 70 cents |
| H1 2026 | 72.5 cents |
| H2 2026 | 76 cents |
Who lives outside your core area
For many shops this is not a niche. After the 2020 Census, 20.0% of the US population lived in rural areas[4]. The share varies a lot by region: 88.9% of people in the West and 84.0% in the Northeast lived in urban areas, compared with 75.8% in the South and 74.3% in the Midwest[4]. A shop based in a small Southern or Midwestern city may find a large part of its demand sits beyond a short drive.
Those customers often have fewer plumbers to choose from and are glad to pay a fair distance charge, as long as it is explained up front. What they resent is learning about it at the door.
Should you serve the far edge at all?
Before setting a charge for the outer zones, decide whether you want that work. Some shops grow by owning a rural area nobody else covers well; others lose money on it every month and never notice. Ask these questions about each outer area:
- Is there enough demand to fill at least one route day a week or a fortnight?
- Are the jobs there larger on average, such as well pumps, water heaters and replacements, or mostly small repairs?
- Can a tech who lives out that way take a van home and start the day there?
- Do you have the licenses and permits needed for every county or city in that area?
- Would referring those calls to a trusted local plumber build more goodwill than serving them badly?
If the answers are mostly yes, invest in the area with route days and fair zone charges. If mostly no, narrow your published service area and keep a referral list for callers outside it.
Build zones from drive time
Pick the starting point
Measure from where your techs actually start: the shop, or their homes if they take vans home.
Draw the core zone
Use drive time, not straight-line miles, at normal traffic. Most shops set the core at the distance their normal pricing already covers.
Add one or two outer zones
Each outer zone has a fixed trip charge that covers the extra round-trip time and miles.
Define out of area
Beyond the last zone, calls are accepted only with manager approval, or referred elsewhere.
Convert to ZIP codes
Phone teams and websites work with ZIP codes or towns, so publish the zones that way.
| Zone | Typical one-way drive | Trip charge (Example) | Dispatch rule |
|---|---|---|---|
| Core | Up to about 25 minutes | None | Normal scheduling |
| Zone 2 | 25 to 45 minutes | $49 | Normal scheduling; group with nearby calls when possible |
| Zone 3 | 45 to 70 minutes | $99 | Planned route days unless urgent |
| Out of area | Over 70 minutes | By approval | Manager decides; offer a referral |
Example (fictional): a Zone 3 call adds 60 extra round-trip miles and 1.2 extra hours of drive time. At 76 cents a mile the vehicle part is about $46; at a loaded labor cost of $78 an hour the time is about $94. The full extra cost is about $140. The shop sets its Zone 3 charge at $99 and plans route days so most Zone 3 calls share the drive with another job.
Disclose it before you dispatch
A trip charge is fair when the customer knows about it before agreeing to the visit. Build the disclosure into every step.
- Website: a service area page with the zones by ZIP code or town and the charge for each.
- Booking call: ask for the address first, then state the zone and charge before discussing times.
- Booking confirmation: one line repeating the trip charge.
- On arrival: the tech's tablet shows the trip charge as a separate line on the proposal.
- Script: Thanks, I have your address. You're in our outer service area, so there's a trip charge of the amount shown on our website, added to the normal price. Would you like to go ahead?
- If the caller objects: I understand. If your repair isn't urgent, we have a route day out your way on Thursday, and the trip charge is lower when we're already in the area.
- If it is an emergency: We can come today. The trip charge applies, and the tech will give you the full price before starting.
If Ava answers your calls, add your zones and charges to the service area details she shares, so after-hours callers hear exactly what your office would tell them.
Cut the cost, not just charge for it
A trip charge recovers cost; scheduling removes it. Shops with a large rural area often save more by routing well than by raising the fee.
- Route days: set fixed days for each outer area and book non-urgent calls into them.
- Stack work: offer customers in outer zones a check of other fixtures or a water heater flush on the same visit.
- Stock the van: make sure techs heading out carry the parts most likely to be needed, because a supply house run from a rural job can cost an hour.
- Members first: offer members in outer zones a reduced trip charge on route days, which fills those days with planned work.
Example: one route day
Example (fictional): a shop books Thursdays for its Zone 3 towns. By Wednesday afternoon the dispatcher has four calls: a water heater replacement, a well pressure tank, a leaking toilet and a membership inspection. The tech loads the van for all four the night before and drives out once.
Without the route day, those calls would have meant four separate round trips over the week, each with more than an hour of drive time and a full trip charge for the customer. With it, the shop drives the long leg once, charges each customer the published Zone 3 charge at the route-day rate, and still earns more per hour of the tech's day. The customers get a lower charge and a predictable appointment, and the toilet repair that would barely cover a separate drive becomes worth doing.
Track the outer zones separately for a quarter: revenue, drive hours, and the margin per tech hour compared with core-zone days. The numbers tell you whether to widen or narrow the map.
Edge cases to decide in advance
- Warranty returns: no trip charge for a callback on your own work.
- Second visits for parts: decide whether the trip charge applies again; most shops charge it once per job.
- Commercial accounts: put distance charges in the rate card or contract instead of applying zones case by case.
- Seasonal roads and weather: allow the dispatcher to move a Zone 3 call to a route day when conditions double the drive.
- Customers on the zone boundary: use the published ZIP list, not a judgment call, so the office stays consistent.
Review the zones once a year, or when you open a new location or a tech moves. Distance charges are only one part of your small-job pricing; our guide to setting a minimum charge covers the cost of the visit itself.
Frequently asked questions
Is a trip charge the same as a service call fee?
No. A service call fee covers the visit and diagnosis for every customer. A trip charge is an added amount for distance, applied only outside your core area.
Should I charge per mile?
Zones are usually better. They are easier to explain on the phone, easier to publish by ZIP code and harder to dispute than mileage readings.
Do rural customers accept trip charges?
Usually, when they are told before the visit and the amount is clearly tied to distance. Surprise charges at the door cause the complaints.
Should the trip charge apply to emergencies?
Yes, if it is disclosed before dispatch. Emergencies are when the long drive is least avoidable.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
Internal Revenue Service (2026). Standard mileage rates (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ
U.S. Census Bureau (2022). Nation's Urban and Rural Populations Shift Following 2020 Census (opens in a new tab) โ