Key takeaways
- New owners usually price from their old hourly wage and forget overhead, unbillable time and their own benefits.
- Start from a full-year budget that pays you at least a market wage, then divide by realistic billable hours, not 2,000.
- Turn the hourly figure into task prices for the 20 jobs you do most, and check them against your local market.
- Underpricing is a survival risk: many new construction businesses do not reach their fifth year.
Why new owners underprice
Most new plumbing businesses are started by good plumbers, not by accountants. The first price list is often built from a simple thought: I used to earn this much an hour, so if I charge a bit more, I am ahead. That thought leaves out almost everything that makes a business work, and it is one of the most common reasons capable plumbers end up back on someone else's payroll.
- Comparing price to your old wage instead of to your total cost of doing business.
- Assuming every working hour is billable, when much of the week goes to driving, quoting, buying parts and admin.
- Forgetting the benefits your employer used to pay: health cover, retirement, paid time off and payroll taxes.
- Setting prices to beat the cheapest listing you can find, without knowing what that business includes or how long it will last.
- Fear: worrying that a fair price will scare off the first customers you badly need.
Pay yourself first, on paper
Your price must pay you at least what you could earn working for someone else, or the business is costing you money. BLS reports that the median annual wage for plumbers, pipefitters and steamfitters was $63,800 in May 2025, with the lowest-paid 10% under $44,150 and the highest-paid 10% above $108,420[1]. Put your own pay in the budget at a realistic point in that range for your skills and market.
Source: U.S. Bureau of Labor Statistics, 2025[1]
Show the data
| Item | Value |
|---|---|
| Lowest 10% | $44,150 |
| Median | $63,800 |
| Highest 10% | $108,420 |
Then add what an employer would have paid on top. Across private industry, benefits make up 30% of total employer compensation costs[2]. As an owner, you pay those yourself, plus self-employment or payroll taxes. Leaving them out of your prices is the same as giving yourself a pay cut.
Build your first price list in six steps
Write a full-year budget
List every cost for a year: your pay and benefits, van payments, fuel, insurance, licenses, tools, software, phone, marketing, accounting, a workspace and a reserve for slow months.
Estimate billable hours honestly
Start from the hours you plan to work, then subtract driving, quoting, supply runs, admin, holidays and slow weeks. Many solo owners bill well under half of their working hours in year one.
Find your break-even hourly cost
Divide the annual budget by billable hours. That is what every billed hour must bring in just to stand still.
Add profit
Add a target profit on top, so the business can replace tools, survive a bad month and eventually hire. Profit is not the same as your pay.
Turn hours into task prices
For each common job, take a realistic time, multiply by your hourly price, add materials with a markup, and round.
Check against the market
Compare with established local shops, not the cheapest ads. If you are far below them, you have probably missed a cost.
Example: a solo plumber's first-year numbers
| Budget line (Example) | Annual amount |
|---|---|
| Owner pay | $65,000 |
| Owner benefits and payroll taxes | $24,000 |
| Van payment, fuel and maintenance | $19,000 |
| Insurance and licenses | $8,500 |
| Tools and equipment | $6,000 |
| Software, phone and answering | $4,500 |
| Marketing | $9,000 |
| Accounting, bank and card fees | $5,000 |
| Reserve and profit target | $15,000 |
| Total to recover | $156,000 |
Example (fictional): the owner plans to work about 2,250 hours in the year but expects only about 1,100 to be billable after driving, quoting, buying parts and admin. Dividing $156,000 by 1,100 billable hours gives about $142 per billable hour before materials markup. His old wage was a fraction of that, which is exactly why pricing from the old wage fails.
If the example's hourly figure feels too high for your market, the answer is rarely to cut the price. Look at the budget and the billable hours instead. Can you cut drive time by narrowing your service area, or reduce supply runs by stocking the van better? Each billable hour you add lowers the price every hour must carry.
Price materials as a business, not a favor
New owners often pass parts through at cost, or close to it, because they remember what the supply house charged. That leaves out the time spent sourcing and picking up parts, the van stock that sits on shelves, returns, warranty replacements and the parts that get damaged or lost. A markup on materials pays for all of that.
- Use a markup table: higher percentages on small, cheap parts and lower ones on large equipment such as water heaters.
- Price from today's replacement cost, not from what you paid months ago.
- Include a small allowance for consumables such as solder, tape, primer and cleanup supplies in every task price.
- Do not show the customer your cost; show the task price with materials included.
Hourly, flat rate or both
Many new shops start with time and materials because it feels safe, and move to flat-rate task prices as they learn their times. Flat-rate prices are easier for customers to accept and reward efficiency, but only work once you know how long jobs really take. A practical path is to time every job in the first months, then convert the most common ones to flat prices.
- Months one to three: time and materials with a clear hourly rate and minimum, timing every job.
- Months three to six: flat prices for the ten most common jobs, built from your timings and hourly price.
- After six months: a full price book of common tasks, reviewed every quarter in the first year.
Your first 20 price-book items
You do not need a thousand-line price book on day one. Price the jobs you will do most, and price them well.
- Service call or diagnostic visit, and your minimum charge.
- Toilet repairs: flapper, fill valve, wax ring reset, full toilet replacement.
- Faucet repair and replacement, kitchen and bathroom.
- Drain clearing by fixture type, and main line clearing from a cleanout.
- Water heater replacement, standard tank, with code items listed separately.
- Shutoff valve, supply line and hose bib replacement.
- Garbage disposal replacement.
- Leak investigation, priced by the hour.
- After-hours charge and any trip charge zones.
Sell what the price includes
A fair price is easier to say when you know what it buys. Write down the things a customer gets from you that a cheaper operator may not offer: a license and insurance, a written price before work, a warranty on labor, clean work areas, photos of the job and a callback when something goes wrong.
Put that list on your website and your proposals, and say it on the phone when a caller asks why you cost more than an ad they saw. Customers rarely buy on price alone when someone explains clearly what they are paying for.
Low prices are a survival risk
Business survival data for construction is sobering. Of construction establishments that opened in March 2015, 57.5% were still operating after five years and 42.5% after ten[3]. Many factors drive that, but a price list that never covered the true cost of the work is a common one, because it leaves no room for a slow season, a van breakdown or a bad debt.
The market is full of very small operators. In 2022, about 17% of plumbing, heating and AC contractor firms with employees had receipts under $100,000[4]. Some of them advertise prices that cannot sustain a business. Competing with them on price means competing with businesses that may not be there next year.
When to raise your prices
- You are booked out more than a few days ahead most weeks.
- Nearly every quote you give is accepted; a very high close rate often means your prices are low.
- Your bank balance falls even in busy months.
- Materials or insurance costs have risen and your prices have not.
- You want to hire your first employee and the numbers do not support a wage.
When two or more of those are true, raise prices on new customers first, and follow the steps in our guide to raising prices without losing loyal customers for the people who already know you.
Frequently asked questions
Should I price below competitors to win my first customers?
Compete on response, communication and quality rather than price. Low prices attract price shoppers and are hard to raise later.
How many hours a year can a solo plumber bill?
Far fewer than they work. Driving, quoting, buying parts and admin take a large share of the week; time yourself for a month to find your real number.
Should I include my own salary in prices?
Yes. Your pay and benefits are a cost of the business. Profit is what is left after you are paid.
How often should a new business review prices?
Every quarter in the first year, as you learn your real job times and costs, then at least once a year.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2015-2025). Business Employment Dynamics: Establishment survival, Construction (Table 7) (opens in a new tab) โ
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: Firms by industry and enterprise receipts size (opens in a new tab) โ