Pricing estimates

Setting a minimum charge for small plumbing jobs

Work out a minimum charge from your real per-visit costs, choose between a minimum, a service call fee and a trip charge, and explain it on the phone.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why small jobs lose money
  2. What every visit costs before the repair
  3. The labor hour is bigger than the wage
  4. Work out your minimum
  5. Audit how many tickets fall below the line
  6. Minimum charge, service call fee or trip charge
  7. How to say it on the phone
  8. When the customer says it is only a five-minute job
  9. Make small jobs worth the visit
  10. Frequently asked questions
  11. References
Pricing estimates: Setting a minimum charge for small plumbing jobsArticle coverPRICING ESTIMATESSetting a minimumcharge for smallplumbing jobsAva for PlumbersInsightsPricing estimates: Setting a minimum charge for small plumbing jobsArticle coverPRICING ESTIMATESSetting a minimumcharge for smallplumbing jobsAva for Plumbers

Key takeaways

  • Every visit carries fixed time and cost before any repair starts: driving, set-up, paperwork and payment.
  • A minimum charge covers that fixed visit cost at your loaded labor rate plus overhead and margin, even for a five-minute fix.
  • Decide whether you use a minimum charge, a service call fee credited to the work, or both, and describe it the same way everywhere.
  • Make small jobs worth the visit by bundling small tasks, not by waiving the minimum.

Why small jobs lose money

A dripping hose bib, a loose toilet, a supply line swap. The repair takes ten minutes, so pricing it at ten minutes of labor feels fair. It is not, because the ten minutes are the smallest part of the visit. The tech still drove there, unloaded, protected the floor, wrote up the job, took payment and drove to the next call. BLS notes that many plumbers travel to worksites every day[1]; for a service company that travel is a cost on every single ticket.

A minimum charge is simply the price of showing up and doing any job properly. It is not a penalty for small jobs. Set it from your numbers and you stop losing money on the calls you thought were easy wins.

What every visit costs before the repair

  • Drive time from the previous job or the shop, including parking and finding the entrance.
  • Set-up and protection: shoe covers, drop cloths, tools in, tools out.
  • Diagnosis and conversation: explaining the problem and the price, getting approval.
  • Paperwork: notes, photos, invoice and payment.
  • Vehicle cost: fuel, maintenance, insurance and depreciation for the miles driven.
  • Office time: booking, confirmation, dispatch and follow-up.

Time these for a week of small jobs. Most shops find the fixed part of a visit is far longer than the repair on small calls, even before counting office time.

The labor hour is bigger than the wage

Average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[2]. Wages are only 70% of what employers spend on an hour of work across private industry; benefits are the other 30%[3]. On top of that come payroll taxes, workers' compensation, vehicles, tools, the office and profit. At the industry level, payroll is only about 27% of receipts[4], which shows how much else each billed hour has to pay for.

What an hour of work costs employersPrivate industry, June 2026. Share of total employer compensation costs.
What an hour of work costs employersDonut chart. Wages and salaries: 70%; Benefits: 30%.Wages and salaries: 70%Benefits: 30%Total cost
  • Wages and salaries 70%
  • Benefits 30%

Source: U.S. Bureau of Labor Statistics, 2026[3]

Show the data
ItemValue
Wages and salaries70%
Benefits30%

Work out your minimum

  1. Measure the fixed visit time

    Take the median drive, set-up, diagnosis and paperwork time from a week or two of small jobs. Leave out the repair itself.

  2. Add the shortest real repair

    Add the time for the smallest repair you would typically do, such as replacing a supply line.

  3. Apply your loaded hourly cost

    Multiply the total time by your fully loaded cost per tech hour: wage, benefits, payroll taxes and insurance.

  4. Add vehicle and office cost per visit

    Use your annual vehicle and office costs divided by the number of visits you run.

  5. Add overhead and margin

    Apply the same overhead and profit target you use in your price book, so small jobs earn the same margin as large ones.

  6. Round and name it

    Round to a clean number and give it a plain name your team and customers understand.

Example (fictional) minimum charge calculation. Use your own inputs.
Input (Example)ValueNote
Fixed visit time0.9 hoursDrive, set-up, diagnosis, paperwork
Shortest typical repair0.2 hoursSupply line or flapper
Loaded cost per tech hour$78Wage plus benefits, taxes, insurance
Labor cost for the visit$861.1 hours times $78
Vehicle and office cost per visit$34Annual costs divided by visits
Total direct cost$120Before overhead and profit
Price at the shop's target multiplier of 1.9$228Rounded to a $225 minimum charge

Your number will differ, but the structure holds. If the minimum you calculate feels uncomfortable to say out loud, that discomfort is useful information: it tells you how much small jobs have been costing you.

Audit how many tickets fall below the line

Before changing anything, find out how big the problem is. Export the last three months of completed residential tickets and sort them by invoice total. Then mark every ticket below the minimum you calculated.

  1. Count the tickets below the minimum and total the gap between what you charged and the minimum.
  2. Group them by job type and by tech. Small-job losses are often concentrated in a few repairs or a few people.
  3. Check how many were warranty returns, which should be tracked separately and not counted here.
  4. Look at how many of those customers were members, landlords or commercial accounts with special terms.
  5. Estimate the annual cost by multiplying the three-month gap by four.

Put the result next to a benchmark. Plumbing, heating and AC contractors generated about $260,000 in receipts per employee in 2022[5]. If a meaningful share of your techs' days goes to tickets that do not cover the cost of the visit, revenue per employee will sit well below what your team could produce, and the minimum charge is one of the quickest levers you have.

Minimum charge, service call fee or trip charge

These three terms are often mixed up, and customers notice. Pick the structure that fits your business and use the same words on the website, on the phone and on the invoice.

  1. Minimum charge: the least any completed job will cost. A five-minute repair is billed at the minimum; a longer job is billed at its normal price.
  2. Service call or diagnostic fee: a charge for the visit and diagnosis, often credited toward the repair if the customer goes ahead. Protects you when the customer declines the work.
  3. Trip charge: a charge for distance, usually by zone, added for customers outside your core area.

Many flat-rate shops use a diagnostic fee plus price-book prices that already exceed the minimum for every task. Time-and-materials shops more often use a minimum number of hours. Either works if the price book makes sure no completed job falls below your calculated minimum.

How to say it on the phone

Callers with small problems are the most likely to object, because the fix sounds trivial. Give the phone team wording that explains the value of the visit, not just the number.

  • Our minimum charge covers a licensed technician coming to your home, diagnosing the problem and completing a small repair, including the parts for most small fixes.
  • If the job turns out bigger, the tech gives you a written price before doing anything more.
  • Many customers save the visit by having us look at a few small things at once. Is there anything else you have been meaning to get fixed?
  • If you are not sure it needs a plumber, I can walk you through a quick check first.

That last line costs you a call now and then. It also earns trust, and the same caller is more likely to book when the problem is real.

When the customer says it is only a five-minute job

Sometimes the objection comes on site, after the repair. The tech should never apologize for the minimum or reduce it on the spot. A calm explanation works better.

  • You're right, the repair itself was quick. The minimum covers the visit, the travel and the warranty on the work, not just the minutes under the sink.
  • While I'm here, is there anything else I can look at? It's included up to the minimum time if it's small.
  • I can show you how to handle this one yourself next time, so you won't need a visit for it.

Make small jobs worth the visit

The best answer to the minimum charge objection is more value in the same visit. Train techs to offer a short list of quick checks on every small call: shutoff valve operation, water heater relief valve test, visible leaks under sinks, toilet flappers and water pressure. Customers often have two or three small issues they never thought worth a call.

Memberships help too. Members who get priority booking and a discount still pay a minimum, but they are happier to call because the visit feels like part of a plan. Review your minimum each year alongside your price book, and whenever labor or vehicle costs rise. If you charge extra for distance as well, keep it separate and clearly zoned, as described in our guide to trip charges for customers outside your core area.

Frequently asked questions

Is a minimum charge the same as a service call fee?

No. A minimum charge is the least any completed job costs. A service call fee covers the visit and diagnosis, and is often credited toward the repair.

Should members pay the minimum charge?

Usually yes, with their member discount applied. Waiving it entirely turns members into the least profitable customers.

Can I quote the minimum on the phone?

Yes, and it reduces surprises at the door. Explain what it covers and that any larger repair gets a written price first.

How often should I review the minimum?

At least once a year with the price book, and whenever wages, vehicle or insurance costs rise noticeably.

References

  1. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ†‘

  4. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  5. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo