Hiring training

A driver safety program for service vans

Build a driver safety program for plumbing vans: MVR checks, a written policy, load securement, phone rules, telematics coaching and crash response steps.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. The biggest risk most shops never measure
  2. Part 1: decide who may drive
  3. Part 2: the written driving policy
  4. Part 3: vehicle checks and load securement
  5. Part 4: coach from data, not just after crashes
  6. Part 5: a crash procedure in every glovebox
  7. Night, winter and emergency-call driving
  8. Example: rolling it out in a 12-van shop
  9. Frequently asked questions
  10. References
Hiring training: A driver safety program for service vansArticle coverHIRING TRAININGA driver safety programfor service vansAva for PlumbersInsightsHiring training: A driver safety program for service vansArticle coverHIRING TRAININGA driver safetyprogram for servicevansAva for Plumbers

Key takeaways

  • Transportation incidents were the most common fatal work event in 2024, at 38.2% of all workplace deaths[1].
  • NIOSH puts the employer cost of a work crash at about $75,000 per nonfatal injury and $751,000 per death[2].
  • A practical program has five parts: who may drive, a written policy, vehicle and load checks, coaching from data, and a crash procedure.
  • Score motor vehicle records the same way for everyone and re-check them every year.

The biggest risk most shops never measure

Ask a plumbing owner about safety and they will talk about trenches, torches and ladders. Those matter. But the hazard every technician faces every day is the drive. Many plumbers travel to job sites daily[3], and most work full time, including nights and weekends[4], which means tired drivers, dark roads and winter weather on emergency calls.

The national numbers are blunt. BLS recorded 5,070 fatal work injuries in 2024, and transportation incidents accounted for 1,937 of them, 38.2% of the total and the most common fatal event[1]. Roadway incidents involving motorized land vehicles alone caused 1,146 deaths[1]. Specialty trade contractors recorded 608 fatal work injuries that year[5].

38.2%

Share of 2024 workplace deaths caused by transportation incidents[1]

NIOSH calls motor vehicle crashes the leading cause of work-related deaths in the United States, with more than 21,000 workers killed in work-related crashes from 2011 to 2022[2]. The cost to employers is just as stark.

Employer cost of work-related crashes, per caseNIOSH estimate, 2019 costs
Employer cost of work-related crashes, per caseComparison. Nonfatal injury: $75,000; Death: $751,000.$75,000Nonfatal injuryNonfatal injury: $75,000$751,000DeathDeath: $751,000Employer cost of work-related crashes, per caseComparison. Nonfatal injury: $75,000; Death: $751,000.$75,000Nonfatal injuryNonfatal injury: $75,000$751,000DeathDeath: $751,000

Source: National Institute for Occupational Safety and Health (CDC), 2026[2]

Show the data
ItemValue
Nonfatal injury$75,000
Death$751,000

Part 1: decide who may drive

Start by writing down who is allowed to drive a company vehicle and under what conditions. That usually means a valid license for the vehicle class, a minimum age set with your insurer, an acceptable motor vehicle record (MVR) and completion of your driver orientation. Pull an MVR before anyone gets keys, with the driver's written authorization, and again at least once a year. If you use a background screening company to get MVRs, follow the federal Fair Credit Reporting Act steps for notice, consent and adverse action.

Use a simple, consistent scoring rule so decisions are not personal. The table below is an example policy, not a legal standard; agree the thresholds with your insurance carrier, which may have its own.

Example MVR scoring grid for company drivers (fictional thresholds)
MVR finding (past 3 years)Example pointsExample action
Minor moving violation (speeding under 15 over, failure to signal)1 eachCoaching conversation
At-fault crash with property damage only2 eachRide-along and refresher training
Major violation (reckless driving, 15+ over, hand-held phone ticket)4 eachWritten warning; restricted driving
DUI, leaving the scene, driving while suspendedDisqualifyingNo company driving
Total of 6 points or moreThresholdDriving privileges suspended pending review

Part 2: the written driving policy

Keep the policy to two pages and make every driver sign it. The rules that matter most for a plumbing fleet are simple and specific:

  • Seat belts on for every trip, driver and passengers.
  • No hand-held phone use while the vehicle is moving; dispatch messages wait until the van is parked.
  • No driving after a 14-hour shift without a rest break; dispatch must call the backup tech instead.
  • Personal use rules: who may ride along, whether vans go home, and where they may be parked overnight.
  • Report any ticket, crash, license suspension or medical condition that affects driving within 24 hours.
  • Never drive impaired, including by prescription medication; follow the drug and alcohol policy.

The 14-hour rule deserves attention because on-call work makes fatigue routine. If the on-call tech has already worked a full day, your after-hours triage should send only true emergencies tonight and book the rest for the morning.

Part 3: vehicle checks and load securement

A service van is a rolling warehouse. Water heaters, cast-iron fittings, pipe racks and ladders become projectiles in a hard stop. Build a two-minute pre-trip check and a monthly inspection into the routine, and design shelving so heavy stock rides low and forward of the rear axle.

  • Daily walk-around: tires, lights, mirrors, ladder rack straps, rear doors latched, nothing loose in the cab.
  • Secure water heaters and tanks upright with ratchet straps to anchor points, never to shelving alone.
  • Keep the cab clear of tools and parts; a loose pipe wrench on the dash is a hazard.
  • Respect the van's payload rating; overloaded vans brake and steer poorly.
  • Monthly: brakes, fluid levels, wipers, fire extinguisher, first aid kit and spill kit.

Backing is a common cause of low-speed fleet damage. Teach the walk-around before reversing, park so the first move is forward, and use a spotter when a helper is on board.

Part 4: coach from data, not just after crashes

Most fleets now have GPS telematics for dispatch. The same systems report harsh braking, rapid acceleration, speeding and late-night driving. Used well, that data lets you coach before a crash instead of after one. Tell employees in writing what is tracked and why, and check your state's rules on employee monitoring.

  1. Pick three measures

    Start with speeding over the posted limit, harsh braking events and phone handling if your system detects it.

  2. Set a baseline

    Collect four weeks of data before taking any action so you know what normal looks like for your routes.

  3. Review weekly

    A manager looks at the top three drivers by events every week and holds a short private conversation.

  4. Recognize good drivers

    Share fleet-wide improvements and reward drivers with clean months; coaching should not feel only punitive.

  5. Re-check quarterly

    Compare events per thousand miles each quarter and adjust training to what the data shows.

Part 5: a crash procedure in every glovebox

  1. Stop safely, turn on hazards and check for injuries. Call 911 if anyone is hurt or the road is blocked.
  2. Do not argue about fault or sign anything except a police report.
  3. Photograph all vehicles, plates, damage, the scene, road conditions and any witnesses' contact details.
  4. Call the office immediately; the office notifies the insurer and the customer whose job is delayed.
  5. Complete the company crash report the same day and follow the post-accident testing policy.
  6. Review the crash within a week to find the cause and any training or route change needed.

Night, winter and emergency-call driving

Plumbing has its own risk pattern. The calls that pay best, frozen and burst pipes, sewage backups and no-water emergencies, tend to arrive at night, in bad weather and after a long day. The tech is tired, the customer is anxious and the dispatcher wants an arrival time. That combination pushes people to drive faster than they should.

Three habits help. First, dispatch gives the customer a realistic arrival window instead of the fastest possible one, so the tech is not racing a promise. Second, the on-call tech checks road conditions before leaving and calls the office if they are unsafe; the policy should say clearly that no job is worth a crash and that declining to drive on an iced highway will never be held against anyone. Third, the van carries winter gear: scraper, traction aids, a blanket, a charged phone power bank and reflective triangles.

New drivers need extra support. A new hire may be an excellent plumber and an inexperienced driver of a heavy, top-loaded van. Pair new hires with a senior tech for their first week of driving, include a short course in parking-lot maneuvers in the loaded van, and keep them off solo night calls until they have driven your routes in daylight. Review their telematics after the first month with the same scorecard used for everyone else.

Finally, include driving in performance reviews. A tech who closes every job but generates frequent harsh braking alerts is carrying risk the business pays for. Put safe driving on the same scorecard as callbacks and customer reviews.

Example: rolling it out in a 12-van shop

Example: a fictional company, Copper Ridge Plumbing, runs 12 vans. In month one the owner pulls MVRs for every driver and finds two with points above the example threshold; both move to ride-along coaching and one is restricted from on-call driving for six months. In month two every driver signs the new policy, and the shop fits strap anchors for water heaters in all vans. In month three the service manager starts weekly telematics reviews. By the end of the quarter, harsh braking events per driver have fallen, and the owner shares the improvement with the insurer at renewal.

Frequently asked questions

How often should we check employees' driving records?

Before anyone drives a company vehicle and at least once a year after that. Many insurers also ask for a list of drivers and their MVRs at renewal.

Do we need a CDL program for our vans?

Not for typical cargo vans and service trucks. CDL and DOT testing rules apply to heavier vehicles and placarded hazardous materials, so check rating plates for dump trucks and trailers.

Can we track our vans with GPS?

Generally yes for company vehicles, but tell employees in writing what is tracked and why, and check your state's rules on monitoring, especially for personal use outside work hours.

What should a tech do first after a crash?

Stop safely, check for injuries, call 911 if needed, then call the office. Photograph the scene and avoid discussing fault.

References

  1. U.S. Bureau of Labor Statistics (2024). National Census of Fatal Occupational Injuries in 2024 (opens in a new tab) โ†‘

  2. National Institute for Occupational Safety and Health (CDC) (2026). About Motor Vehicle Safety at Work (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo