Key takeaways
- Every water system had to submit a service line inventory by October 16, 2024 and make it publicly accessible; systems serving more than 50,000 people publish it online[2].
- The map covers the utility's side and the customer's side, each as Lead, Galvanized Requiring Replacement, Non-Lead or Lead Status Unknown[2].
- EPA's 2025 count is 4 million lead service lines, a quarter of them predicted from lines still marked unknown[1].
- If a customer reports a wrong category, the utility must respond within 30 days with an offer to inspect[2]; your photos and notes support that request.
- Notices go out within 30 days of the baseline inventory and after each annual update[3], so calls arrive in waves.
Why customers call about the map
Utilities now publish where they think the lead pipes are, address by address. Every water system had to submit an initial service line inventory to its state by October 16, 2024, and the inventory has to be publicly accessible; systems serving more than 50,000 people must put it online[2]. Customers find their address on a map, see a word like “unknown” next to it, and call a plumber, often before they call the utility.
Those calls are good work if you handle them well and a liability if you guess. The map is the utility's record, built from its own files and whatever it has inspected so far. It can be right, out of date or a placeholder. Your job on the phone is to find out what the record says for that address, explain what the category means and book the visit that settles the question for that house.
What the map is showing
The inventory covers the whole service line, not only the utility's pipe. Where ownership is shared, the record covers the utility's portion and the customer's portion, and each portion gets its own category[2]. Read that split first, because the two sides often differ: a utility that replaced its side of the line years ago may still have nothing on file for the pipe from the curb stop to the house.
| Category | What it means | What to tell the caller |
|---|---|---|
| Lead | Records or an inspection show lead on that portion of the line[2]. | The line is recorded as lead. Ask what the utility has said about replacement timing and the connection inside the house. |
| Galvanized Requiring Replacement | A galvanized line that is or ever was downstream of lead, or is downstream of a line of unknown material[4]. | It is treated as needing replacement under the rules even though it is not lead. A visit can confirm what is on the customer's side. |
| Non-Lead | Records, an inspection or another approved method show it is not lead or galvanized requiring replacement[2]. | The record says non-lead. That describes the pipe, not the water. |
| Lead Status Unknown | No documented evidence either way[2]. | Unknown means not yet identified, not lead. A look at the pipe where it enters the house is often the quickest way to an answer. |
Galvanized lines surprise owners more than lead does. A homeowner who reads “galvanized requiring replacement” on a map usually hears “lead” and panics, or hears “not lead” and relaxes. Neither is right. The category exists because galvanized pipe that sat downstream of lead can hold lead in its corrosion, and if the utility cannot show the galvanized line was never downstream of lead, it goes in this category[4].
How many lines are still in question
The national numbers explain why your area may still be full of unknowns. EPA's 2025 estimate, built from the inventories states reported by March 31, 2025, is 4 million lead service lines: 3 million reported as lead and 1 million reported as unknown that EPA predicts will turn out to be lead[1]. Those 4 million sit among roughly 103 million service lines nationally, so most addresses are not lead, but some states carry far more than others[5].
Galvanized lines matter more in some markets than lead does. EPA projects 137,872 galvanized lines requiring replacement in Texas against 6,116 lead lines[5]. In a market like that, most of the conversations prompted by a utility notice are about old galvanized pipe, even when the letter's heading says lead.
The state totals are a starting point. The useful number is local: download the inventory for each water system you serve and count the lead, galvanized and unknown entries in your ZIP codes. That count is the pool of homes that will get letters, inspections and replacement offers over the next decade, and it tells you how many phone calls to plan for when the mailings go out.
Reading the map for a customer's address
Find the right water system
The water bill names it. Neighboring towns can be served by different systems, and each one publishes its own inventory.
Search the address
Each line carries a street address or another locational identifier such as a block, an intersection or GPS coordinates[2]. If the house number does not come up, try the nearest intersection.
Read both sides
Note the category for the utility's portion and for the customer's portion separately. Write both down.
Check how current it is
Utilities must update the inventory every year with new information[2]. A category can change after an inspection, a replacement or a correction, so note the date on the record.
Compare it with the house
Lead pipes are more likely in older cities and in homes built before 1986[6]. A 1990s subdivision marked unknown is a different call from a 1920s row house marked unknown.
Put it on the job
Category for each side, the date of the record and the utility's contact line go on the work order before anyone drives out.
The calls the maps generate
| The caller says | Ask | Book |
|---|---|---|
| “I got a letter saying my pipe may contain lead.” | Which category the letter gives, the address, and whether anyone has looked at the pipe where it enters the house. | An inspection visit. Ask them to keep the letter for the tech. |
| “The map says unknown.” | The age of the home, and whether they can see the pipe at the meter or where it comes through the wall or floor. | A visual check, with photos they can send to the utility. |
| “The map says lead on my side.” | Whether the utility has offered replacement, and any dates in its letters. | An estimate for the work inside the house that goes with the utility's replacement. |
| “We're buying or selling this house.” | The closing date and who owns it today. | A visual check and a written note. Utilities must offer full replacement to a new owner within six months of a sale where the line is still due for replacement[2]. |
| “I rent, and my landlord won't say.” | Who owns the building and how to reach them. | Usually nothing until the owner calls. Give the utility's contact line. |
Most of these calls need a visit, not an opinion over the phone. Resist the urge to reassure. A CSR who says “it's probably fine” about an unknown line has made a statement about a pipe nobody has seen. A CSR who says “unknown just means nobody has checked yet; we can look at the pipe where it comes in and give you photos for the utility” has booked the job and told the truth.
When the map is wrong
Inventories get things wrong, and the rule expects it. If a customer tells the utility they think their line is in the wrong category, the utility must respond within 30 days with an offer to inspect[2]. Utilities also have to check a random sample of the lines they marked non-lead and correct the inventory when they find lead[2]. Plenty of “unknown” entries mean nothing more than a missing record.
Your visit can give the customer what they need for that conversation. Photograph the pipe where it enters the house and on both sides of the meter, with a tape measure in frame. EPA's homeowner guide uses a penny or key and a magnet for a quick check[7]; your tech can do better, and the customer can repeat that check to see for themselves. Write a short note: address, date, what was seen, where, and by whom. Do not write that the water is safe. EPA is plain that testing the water is the only way to confirm whether lead is present[7].
Check the map before routine work in older homes too, not only when the customer brings it up. If the record says lead or unknown, the tech should know before working on the main shutoff or the connection at the meter, and the customer should hear about the line before the work starts rather than after. A ten-second lookup on the work order saves an awkward conversation later. If the shop already pulls permit history or the build year before a visit, add the map lookup to the same routine.
Example note for a customer to send the utility: “On March 4 our technician inspected the service line where it enters the basement at 18 Elm Street. The pipe on the customer side of the meter is copper, 3/4 inch, with a soldered joint at the meter. Photos attached. This describes the pipe we could see, not the buried section or the water quality.”
Dates that set the pace of the calls
Oct 16, 2024
Initial service line inventory due to the state[2]
Nov 1, 2027
Compliance date for the improved lead and copper rule, including the baseline inventory[8]
Within 30 days
Notices to people served by lead, galvanized or unknown lines after the baseline inventory and each annual update[3]
10 years
Time water systems have to identify and replace lead pipes[9]
Check your state drinking water program for its own dates.
Each mailing produces a burst of calls. Notices go to people served by lead, galvanized or unknown lines within 30 days of the baseline inventory and again after each annual update, and new customers get one when service starts[3]. Utilities seeking an owner's consent for replacement must make at least four attempts using at least two methods, such as letters, door hangers and phone calls[2]. Ask the water systems you serve when their mailings go out and staff the phones for the week after.
The replacement programs themselves, and where private contractors fit, are covered in the Lead and Copper Rule Improvements explained and winning utility lead service line replacement work. Any pipe and fittings you install inside the house have to meet the federal lead-free definition; see lead-free plumbing rules for products and solder.
Answering the map calls well
The phone conversation sets up everything else, and the longer conversation at the kitchen table is in talking to homeowners about lead service lines. On the phone, three things matter: get the address and what the map or letter says, find out whether the pipe can be seen, and book a visit with enough time to photograph both sides of the meter.
- Caller
- SI Employee
- Your team
01Caller
Caller reads the map
Their address shows Unknown on the customer side and Non-Lead on the utility side.
02SI Employee
Details taken
Address, age of the home, what the map or letter says, and whether the pipe is visible.
03SI Employee
Visit booked or requested
Booked into the tested schedule, or saved as a request for the office to confirm.
04Your team
Record checked
The CSR pulls the utility's record and its date and adds both to the job.
05Your team
Pipe documented
Photos and a short written note the customer can send to the utility.
Example sequence for a company that books inspection visits from map calls.
Example: three houses on one block of 1940s homes. At No. 12 the map shows Non-Lead on the utility side and Unknown on the customer side; the owner can see copper at the basement wall, so the tech photographs it and the owner sends the utility a correction request. At No. 14 both sides show Lead and the utility has sent a consent letter; the owner wants to know what happens inside, so the shop quotes the new connection and a new main shutoff. At No. 16 the customer side shows Galvanized Requiring Replacement; the owner assumed that meant no problem, so the CSR explains the category and books an estimate visit.
If an SI Employee answers when your lines are busy or after hours, it asks the same questions from your approved script and books the visit or takes a request. It cannot see the utility's map, and a forwarded call does not tell it which letter or website the caller is looking at, so it asks. The 8-truck residential example shows how routine calls like these wait for the morning dispatch instead of waking the on-call tech, and the after-hours plumbing example on assistcall.ai walks through the same handoff.
Frequently asked questions
Does “lead status unknown” mean the pipe is lead?
No. It means the utility has no documented evidence either way[2]. EPA does expect some unknown lines to turn out to be lead: 1 million of its 4 million estimate[1].
Can a plumber change the category on the utility's map?
No. The utility keeps the inventory. A customer who believes the category is wrong can tell the utility, which must respond within 30 days with an offer to inspect[2]. Your photos and written note support that request.
If the map says non-lead, is the water lead-free?
Not necessarily. The category describes the service line. Fixtures and interior piping can also matter, and testing the water is the only way to confirm whether lead is present[7].
Who pays to replace a lead service line?
It depends on the utility's program and the funding in your state. Some states or utilities pay for testing or replacement[7]. Ask the utility before quoting the customer-side work.
How often do the maps change?
Utilities must update the inventory every year with new information[2], so check the date on the record before every visit.
References
U.S. Environmental Protection Agency (2025). Fact Sheet: 2025 Update to the 7th Drinking Water Infrastructure Needs Survey and Assessment (opens in a new tab) ↑
Legal Information Institute, Cornell Law School (text of EPA rules) (2026). 40 CFR 141.84: Service line inventory and replacement requirements (opens in a new tab) ↑
Legal Information Institute, Cornell Law School (text of EPA rules) (2026). 40 CFR 141.85: Public education and supplemental monitoring and mitigation requirements (opens in a new tab) ↑
Legal Information Institute, Cornell Law School (text of EPA rules) (2026). 40 CFR 141.2: Definitions (opens in a new tab) ↑
U.S. Environmental Protection Agency (2025). 2025 Updated Service Line Projections (7th DWINSA) (opens in a new tab) ↑
U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) ↑
U.S. Environmental Protection Agency (2026). Protect Your Tap: A Quick Check for Lead (opens in a new tab) ↑
Legal Information Institute, Cornell Law School (text of EPA rules) (2026). 40 CFR 141.80: General requirements (opens in a new tab) ↑
U.S. Environmental Protection Agency (2024). Lead and Copper Rule Improvements (opens in a new tab) ↑