Key takeaways
- The International Plumbing Code comes from the International Code Council; the Uniform Plumbing Code from IAPMO[1].
- Adoption is state and local: Florida builds its code on the ICC's International Codes and updates it every three years[2]; Oregon's 2026 code is based on the 2024 UPC[3].
- Texas lets its plumbing board adopt both codes and lets cities amend them for local concerns[1].
- Some rules are the same everywhere because they come from federal law, such as the 0.25% weighted-average lead-free standard[4].
Two model codes, many local versions
The United States has no national plumbing code. Instead, two organizations publish model codes that states and cities adopt, often with amendments. The Uniform Plumbing Code (UPC) is published by the International Association of Plumbing and Mechanical Officials (IAPMO), and the International Plumbing Code (IPC) by the International Code Council (ICC)[1]. Both are updated on a regular cycle, and jurisdictions adopt new editions on their own timetables, so two neighboring cities can be on different codes or different editions.
For a plumbing business, the code in force at the job address determines how you size drains, run vents, install water heaters and pass inspection. Licensing exams are often based on the code the state uses, and most states and some localities require plumbers to be licensed[5], so the code also shapes how you train apprentices and what plumbers moving from another region need to relearn.
How adoption works
States take different approaches. Some adopt one code statewide. Others set a minimum and let cities choose or amend. Three examples show the range:
- Florida: the Florida Building Commission must use the International Codes published by the ICC as the basis for updates, including the International Plumbing Code, and must adopt an updated Florida Building Code every three years[2].
- Oregon: the 2026 Oregon Plumbing Specialty Code is based on the 2024 Uniform Plumbing Code with Oregon amendments, and became effective October 1, 2026[3].
- Texas: the state plumbing board adopts both the Uniform Plumbing Code and the International Plumbing Code, may adopt later editions by rule, and municipalities may amend the code they use to conform to local concerns that do not substantially vary from state rules[1].
Broadly, the UPC is common in western states, while the IPC and the plumbing chapters of the International Residential Code are common in much of the rest of the country. But the broad pattern is no substitute for checking the jurisdiction. Big cities sometimes write their own code: New York City, for example, enforces its own plumbing code as part of its Construction Codes.
For one- and two-family homes in many IPC jurisdictions, the plumbing chapters of the International Residential Code apply instead of the IPC itself. Check which document your inspector uses for residential work.
Practical differences plumbers notice
The two codes agree on most fundamentals: protect potable water, keep traps sealed, vent the drainage system, and size pipes to the load. The differences show up in specific rules, and they are the reason a plumber who moves between regions needs a code refresher.
| Topic | What to watch | Practical tip |
|---|---|---|
| Venting methods | The codes differ on which alternative venting methods they accept and how, including air admittance valves and wet venting arrangements | Do not assume a venting method approved in one code is accepted in the other |
| Trap arm lengths | Maximum distances from trap to vent differ by pipe size between the codes | Use the table from the code in force; it changes fixture placement in tight bathrooms |
| Drainage fixture units | Both size drains by fixture units, but values and tables differ | Re-run sizing when you move a design between jurisdictions |
| Water heaters | Installation, seismic and drain pan rules differ, and local amendments are common | Check the water heater chapter and local amendments for every replacement |
| Materials and standards | Listed materials and referenced standards are updated each edition | Confirm a material is approved under the edition in force |
| Administration | Permit, inspection and exemption rules sit in each code's first chapter and are often replaced by local rules | Read the local administrative chapter, not just the technical chapters |
Trap arm length is a good example. The 2024 UPC table allows a maximum of 42 inches for a 1-1/2 inch trap arm and 60 inches for a 2 inch trap arm, with longer distances added in 2024 for bathtubs and showers on a horizontal wet vent[3]. The IPC's corresponding table uses different maximum distances. A layout that passes in one jurisdiction can fail in the next if the crew does not check.
What is the same everywhere
Some requirements come from federal law, so they apply regardless of which model code a jurisdiction uses. Under the Safe Drinking Water Act, lead free means a weighted average of 0.25% lead across the wetted surfaces of pipes, fittings and fixtures[4]. The federal standard for toilets is 1.6 gallons per flush, and EPA's WaterSense label requires 1.28 gallons per flush or less, 20% less water[6].
Source: U.S. Environmental Protection Agency, WaterSense, 2026[6]
Show the data
| Item | Value |
|---|---|
| Federal standard | 1.6 gallons per flush |
| WaterSense label (maximum) | 1.28 gallons per flush |
Product listings work the same way. Under either code, fixtures, valves, water heaters and backflow assemblies must be listed to the referenced standards, and inspectors check labels. Buying from a supplier who knows your jurisdiction's code saves returns and failed inspections, especially for imported or online-only products that may not carry the listings your inspector expects.
When in doubt about a product, ask the supplier for the listing certificate before the job and keep a copy with the job file.
Many jurisdictions, under both codes, go further than federal minimums on water efficiency, and some utilities offer rebates for WaterSense fixtures. Check local amendments for flow rates on showerheads, faucets and toilets.
How to confirm the code for a job
Check the state
Find whether the state adopts a plumbing code statewide, sets a minimum, or leaves it to cities and counties.
Check the city or county
Look up the local building department's adopted codes page, including the edition and local amendments.
Check the building type
Confirm whether residential work falls under the IRC plumbing chapters or the plumbing code itself.
Check the date
New editions often take effect on a set date, with permits applied for before that date reviewed under the old edition.
Record it
Add the code, edition and key amendments to your jurisdiction reference sheet for estimators and techs.
Licensing exams and moving between codes
The code a state uses usually shapes its licensing exams. A journeyman who learned under the UPC and moves to an IPC state may know the trade thoroughly and still miss exam questions on venting options, fixture unit tables or water heater rules. Shops hiring experienced plumbers from another region should budget for code study before the exam and before solo work, and pair new arrivals with a lead who knows the local code for their first few weeks.
The same applies to apprentices who train near a border. If your shop works in jurisdictions on both codes, teach apprentices which code applies where from the start, and make sure their exam preparation matches the code their state tests. Code books are not cheap, but they cost less than a failed exam or a failed inspection.
Questions to ask the local inspector
- Which code and edition are you enforcing, and when does the next edition take effect here?
- Are there local amendments I should know about, especially for water heaters, venting and materials?
- Which alternative venting methods do you accept, and do they need prior approval?
- For residential work, do you inspect to the plumbing code or the residential code's plumbing chapters?
- What are the most common corrections you are writing right now?
Inspectors generally appreciate contractors who ask before the job rather than argue after it. Keep their answers in your jurisdiction reference sheet, with the date, so the advice is shared across your crews and refreshed when codes change. When an answer depends on interpretation, ask whether the jurisdiction has published a written code interpretation you can keep on file.
Training a crew that works across codes
Shops near jurisdiction lines or across state borders often work under more than one code. Make the differences explicit. Keep a short comparison sheet for the jurisdictions you serve: trap arm tables, venting rules, water heater requirements, cleanout rules and any local amendments. Review it in a toolbox talk whenever a new edition is adopted.
Example: a fictional shop, Two Rivers Plumbing, works in a city on the UPC and a neighboring county on the IPC. After a failed inspection on a bathroom remodel where the trap arm length met one code but not the other, the service manager adds the code in force to every work order and prints the trap arm table for that code on the job sheet. Inspection corrections for that issue stop. See our guides to what changed in the 2024 codes and when permits are required.
Frequently asked questions
What is the difference between the IPC and the UPC?
They are two model plumbing codes from different publishers: the IPC from the International Code Council and the UPC from IAPMO. They agree on fundamentals but differ in specific rules, such as venting methods and trap arm tables.
Which states use the UPC?
The UPC is common in western states; Oregon's 2026 code, for example, is based on the 2024 UPC. Many other states and cities use the IPC or IRC, and some, like Texas, allow either.
Does Florida use the IPC?
Florida's building code, including its plumbing volume, is based on the ICC's International Codes, and Florida adopts an updated code every three years.
How do I find which plumbing code my city uses?
Check the local building department's adopted codes page, which lists the code, edition and local amendments.
References
Texas State Board of Plumbing Examiners (2025). The Plumbing License Law (Texas Occupations Code, Chapter 1301), unofficial plain-view edition, September 2025 (opens in a new tab) โ
The Florida Legislature (2026). Florida Statutes, Section 553.73: Florida Building Code (opens in a new tab) โ
Oregon Building Codes Division (2026). 2026 Oregon Plumbing Specialty Code: Summary of amendments and significant changes (opens in a new tab) โ
U.S. Environmental Protection Agency (2026). Use of Lead Free Pipes, Fittings, Fixtures, Solder and Flux for Drinking Water (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Environmental Protection Agency, WaterSense (2026). Residential Toilets (opens in a new tab) โ