Hiring training

How to hire plumbers in a tight labor market

Where to find plumbers, how to build an offer that wins, and a fast hiring process that gets a good tech from application to offer within days, not weeks.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. The market you are hiring in
  2. Who is in the pool
  3. Build an offer that wins
  4. Where good plumbers come from
  5. A hiring process measured in days
  6. Questions and checks that predict performance
  7. The first 30 days decide whether they stay
  8. Mistakes that cost hires
  9. Keep the people you already have
  10. Example: from ad to start in nine days
  11. Frequently asked questions
  12. References
Hiring training: How to hire plumbers in a tight labor marketArticle coverHIRING TRAININGHow to hire plumbers ina tight labor marketAva for PlumbersInsightsHiring training: How to hire plumbers in a tight labor marketArticle coverHIRING TRAININGHow to hire plumbersin a tight labormarketAva for Plumbers

Key takeaways

  • BLS projects about 42,000 plumber openings a year through 2035, so you are competing with every other shop for the same people[1].
  • Lead with pay and schedule: the median plumber wage was $63,800 in May 2025, and contractor hourly earnings rose about 4.4% in a year[2][3].
  • Speed wins: respond to applicants the same day and make offers within days, not weeks.
  • Widen the pool: women are 3.1% of plumbers and Hispanic or Latino workers 30.3%, so bilingual ads and inclusive recruiting reach people competitors miss[4][5].

The market you are hiring in

Almost every plumbing owner says the same thing: there are more jobs than people to do them. The data backs that up. BLS projects about 42,000 openings for plumbers, pipefitters and steamfitters each year on average from 2025 to 2035[1]. Construction overall had 298,000 job openings in September 2026, up from 206,000 a year earlier[6]. And about 18% of employed plumbers, pipefitters and steamfitters were 55 or older in 2025[7], so retirements will keep the pressure on.

You are also competing with neighboring trades for the same mechanically minded people. BLS projects about 40,600 openings a year for HVAC mechanics and installers over the same decade[8], and many of those jobs sit inside the same plumbing, heating and air-conditioning contractors you compete with. A candidate who can braze and read a schematic has options, and knows it.

In this market, the shops that hire well do three things differently. They know exactly who they are looking for, they make an offer that answers the questions good techs actually ask, and they move fast. Everything below is about those three.

Who is in the pool

The plumbing workforce does not look like the general workforce, and that shapes where you should look. Women were 3.1% of employed plumbers, pipefitters and steamfitters in 2025, compared with 47.1% of all workers[4]. Hispanic or Latino workers made up 30.3% of employed plumbers, versus 20.0% of all workers[5].

Women and Hispanic or Latino workers: plumbers vs all workers, 2025
Women and Hispanic or Latino workers: plumbers vs all workers, 2025Column chart. Women: Plumbers, pipefitters and steamfitters 3.1%, All workers 47.1%; Hispanic or Latino: Plumbers, pipefitters and steamfitters 30.3%, All workers 20%.0%20%40%60%Women · Plumbers, pipefitters and steamfitters: 3.1%3.1%Women · All workers: 47.1%47.1%WomenHispanic or Latino · Plumbers, pipefitters and steamfitters: 30.3%30.3%Hispanic or Latino · All workers: 20%20%Hispanic or LatinoWomen and Hispanic or Latino workers: plumbers vs all workers, 2025Column chart. Women: Plumbers, pipefitters and steamfitters 3.1%, All workers 47.1%; Hispanic or Latino: Plumbers, pipefitters and steamfitters 30.3%, All workers 20%.0%20%40%60%Women · Plumbers, pipefitters and steamfitters: 3.1%3.1%Women · All workers: 47.1%47.1%WomenHispanic or Latino · Plumbers, pipefitters and steamfitters: 30.3%30.3%Hispanic or Latino · All workers: 20%20%Hispanic orLatino
  • Plumbers, pipefitters and steamfitters
  • All workers

Source: U.S. Bureau of Labor Statistics, 2025[4]

Show the data
ItemPlumbers, pipefitters and steamfittersAll workers
Women3.1%47.1%
Hispanic or Latino30.3%20%

Two practical consequences. First, if your ads, website and interviews are English-only, you are invisible to part of the experienced talent pool; post in Spanish as well where your market supports it, and make sure someone can interview in Spanish. Second, women are a large untapped group for apprenticeships and service roles; showing women on your team in photos, offering proper-fitting gear and stating a clear anti-harassment policy all help.

Build an offer that wins

Good technicians compare offers on a handful of things. Make each one easy to see in the ad and say it again in the interview.

What plumbing candidates compare between offers
Offer elementWhat candidates checkHow to stand out
PayHourly or salary range, commission or spiffs, overtimePublish a real range; show typical earnings with on-call
ScheduleStart time, weekends, on-call rotationState the rotation and how on-call is paid
Truck and toolsTake-home vehicle, tool allowance, stocked inventoryPhotos of the trucks and inventory
TrainingLicense support, manufacturer training, ride-alongsName the courses you pay for
BenefitsHealth insurance, retirement, paid time offList them plainly with start dates
CultureHow the shop treats people, sales pressureReal quotes from your techs, with their permission
GrowthPath to lead tech, trainer, managerDescribe the ladder and who has climbed it

Pay is still the first filter. The median annual wage for plumbers, pipefitters and steamfitters was $63,800 in May 2025[2]. Average hourly earnings for all employees at plumbing, heating and AC contractors reached $42.38 in September 2026, about 4.4% higher than a year earlier[3]. If your range has not moved in two years, your ad is probably losing to the shop next door.

Where good plumbers come from

  • Employee referrals: pay a meaningful bonus after the new hire completes 90 days, and tell your techs about it often.
  • Apprenticeship programs and trade schools: build relationships with instructors and offer ride-alongs for students.
  • Supply houses: counter staff know who is unhappy where; leave a card and a job flyer.
  • Veterans’ transition programs: many service members have mechanical and pipe-trade experience.
  • Job boards and social media: short, specific posts with pay ranges and real photos.
  • Former employees in good standing: a friendly call can bring back people who left for a reason that no longer applies.
  • Your own customers and community: a line on invoices and vans saying “We’re hiring” reaches people who already like you.

Track where every applicant came from and where every hire came from. After six months you will know which two or three channels deserve most of your effort.

A hiring process measured in days

  1. Same day: respond

    Reply to every application within hours with a text or call to book a short phone screen. Good candidates rarely wait.

  2. Day 1-2: phone screen

    Fifteen minutes: license level, experience, pay expectation, availability, driving record. Book the next step on the call.

  3. Day 2-4: meet and test

    An in-person interview plus a practical check, such as a ride-along or a bench test on common repairs.

  4. Within a day of the test: offer

    Make a written conditional offer, with pay, schedule, benefits and start date.

  5. Screening

    Run background and driving checks under a written, consistent process.

  6. Start

    Start within one to two weeks of the offer, with a planned first week.

Write down who owns each step. The most common cause of a lost candidate is an application that sat unanswered because everyone assumed someone else had called.

Questions and checks that predict performance

  • “Walk me through the last water heater you replaced. What went wrong and what did you do?”
  • “A customer says your price is too high. What do you say?”
  • “Tell me about a time you made a mistake on a job. How did the customer find out?”
  • Practical: diagnose a running toilet or a dripping cartridge faucet on a bench.
  • Practical: ride along for half a day and watch how they talk to customers.

Look for honesty about mistakes and patience with customers as much as technical skill. Skills can be taught faster than temperament.

The first 30 days decide whether they stay

Hiring does not end at the start date. A new tech who spends the first week sweeping the shop, or is thrown into solo emergency calls on day two, is already looking at other ads. Plan the first month before they arrive.

  1. Day one: paperwork done in an hour, then a ride-along with a strong lead tech, truck and tools assigned.
  2. Week one: ride-alongs across different job types; learn the software, pricing and call-handling rules.
  3. Week two: run simple calls with a lead tech available by phone; review each job at the end of the day.
  4. Weeks three and four: a normal schedule, with a check-in from the owner or service manager each week.
  5. Day 30: a sit-down conversation about what is working, what is not and what training comes next.

The same applies to apprentices, with more structure and a named mentor. Make the training path visible from day one, including when pay steps happen and what license support you offer, so the new hire can see a future at your shop rather than just a job.

Mistakes that cost hires

  • Ads without a pay range, which many candidates skip and some states require.
  • Requiring a long online application before any human contact.
  • Interviews scheduled a week out.
  • Vague answers about on-call pay and weekend work.
  • No plan for the first week, so the new hire spends days sitting in the shop.

Keep the people you already have

Every technician you keep is one you do not have to hire. Ask your current team the questions candidates ask you: is the pay competitive, is on-call fair, are the trucks and tools good, is there a path forward? Do stay interviews once a year, with three simple questions: what keeps you here, what would make you leave and what would you change? Act on at least one answer each time. Competitors will call your best techs; make sure they have reasons to say no.

Reduce the small frustrations that drive people out, too: late schedules, unpaid time waiting for parts, unclear commission rules and constant interruptions from the office. Answering overflow and after-hours calls with a reliable service, rather than routing everything to the on-call tech’s cellphone, cuts the interruptions that wear on-call technicians down.

Example: from ad to start in nine days

Example (fictional): A five-truck shop posts a service plumber ad in English and Spanish with a pay range, on-call terms and photos of its trucks. A journeyman applies on Monday evening; the office texts him Tuesday morning and does a phone screen at lunch. Wednesday he rides along with the lead tech for half a day. Thursday morning he receives a written conditional offer. Screening clears the following Monday, and he starts the Wednesday after, with a planned week of ride-alongs. He later says another shop called him back two weeks after he applied.

Related reading: the US plumber shortage, plumber wages by state, writing a plumber job ad and pay transparency laws for job posts.

Frequently asked questions

Where is the best place to find plumbers?

Employee referrals, apprenticeship programs and trade schools tend to produce the best hires, supported by job boards with clear pay ranges. Track sources to see what works in your market.

How fast should a plumbing company make a job offer?

Within days of the application. Respond the same day, screen within a day or two and offer within a day of the practical test.

What do plumbers care about most in a job offer?

Pay, schedule and on-call terms, the truck and tools, training and benefits. Put them in the ad, not just the interview.

Should we hire apprentices or experienced plumbers?

Most shops need both: experienced techs to run calls now and apprentices to grow your own team. A clear training path makes apprentices easier to attract and keep.

References

  1. U.S. Bureau of Labor Statistics (2025-2035). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  2. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  3. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) ↑

  4. U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 11: Employed persons by detailed occupation, sex, race, and Hispanic or Latino ethnicity, 2025 (opens in a new tab) ↑

  5. U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 11: Employed persons by detailed occupation, sex, race, and Hispanic or Latino ethnicity, 2025 (opens in a new tab) ↑

  6. U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Survey, Table 1: Job openings levels and rates by industry (opens in a new tab) ↑

  7. U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 11b: Employed persons by detailed occupation and age, 2025 (opens in a new tab) ↑

  8. U.S. Bureau of Labor Statistics (2025-2035). Occupational Outlook Handbook: Heating, Air Conditioning, and Refrigeration Mechanics and Installers (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo