Key takeaways
- The national median for plumbers, pipefitters and steamfitters was $63,800 a year ($30.67 an hour) in 2025[1][2].
- State medians vary widely: $77,490 in New York, $72,830 in California and $59,840 in Texas[3][4][5].
- Metro spreads inside one state can be larger than gaps between states; San Jose’s median was $107,560[4].
- Set pay by role using percentiles for your own metro, then adjust for on-call, commission and benefits.
- Wages are moving: contractor hourly earnings rose about 4.4% in the year to September 2026[6].
Where these numbers come from
The figures below come from the Bureau of Labor Statistics Occupational Employment and Wage Statistics program, the BLS survey of wages by occupation and area, as published through the Labor Department’s O*NET OnLine local wage tool[2][4]. They cover the occupation “plumbers, pipefitters and steamfitters,” which includes residential service plumbers alongside commercial and industrial pipe trades. The data year is 2025.
Each area is reported at three points: the 10th percentile (low), the median and the 90th percentile (high). The median means half of workers in that area earned more and half earned less. Percentiles are what make this data useful for setting pay, because an apprentice, a journeyman and a lead service tech sit at very different points in the range.
The national picture
$63,800
Median annual wage, plumbers, pipefitters and steamfitters, May 2025[1]
Nationally, the lowest-paid 10% earned less than $44,150 a year and the highest-paid 10% more than $108,420[7][8]. In hourly terms the range ran from $21.22 at the 10th percentile to $52.13 at the 90th, with a median of $30.67[2]. Where plumbers work matters too: those employed by plumbing, heating and air-conditioning contractors earned a median $63,010, compared with $71,660 in government[9].
That government premium matters if you compete with school districts, cities, hospitals or utilities for maintenance plumbers in your area. Those employers often offer steady hours and pensions as well. A residential service shop can still win those candidates with higher total earnings from on-call and commission, a clearer path to a license and more variety, but only if the ad and the interview make that case explicitly.
Three large states compared
| Area | 10th percentile | Median | 90th percentile |
|---|---|---|---|
| United States | $44,150[7] | $63,800[1] | $108,420[8] |
| New York | $46,130[3] | $77,490[3] | $130,420[3] |
| California | $47,350[4] | $72,830[4] | $131,100[4] |
| Texas | $38,270[5] | $59,840[5] | $81,890[5] |
| Area | 10th percentile | Median | 90th percentile |
|---|---|---|---|
| United States | $21.22[2] | $30.67[2] | $52.13[2] |
| New York | $22.18[3] | $37.26[3] | $62.70[3] |
| California | $22.76[4] | $35.01[4] | $63.03[4] |
| Texas | $18.40[5] | $28.77[5] | $39.37[5] |
Two patterns stand out. First, the median in New York is more than $17,000 a year above Texas[3][5]. Second, the spread within each state differs: in California and New York the 90th percentile is well above the national top, while in Texas it sits below the national 90th percentile. That tells you how much room there is for experienced techs to earn more without moving.
Metro areas: the spread inside one state
For hiring, metro data matters more than state data, because that is the market a candidate actually compares offers in. California shows how wide the gap can be. The San Jose-Sunnyvale-Santa Clara median was $107,560, while Fresno’s was $64,400[4].
Texas metros are much closer together. Austin-Round Rock-San Marcos had a median of $62,810, Houston $61,300, Dallas-Fort Worth-Arlington $61,250, San Antonio $58,180 and El Paso $53,560[5].
In New York, the New York-Newark-Jersey City median was $78,610, Albany-Schenectady-Troy $77,460, Rochester $73,580, Buffalo-Cheektowaga $72,230 and Syracuse $67,040[3]. Upstate metros are close to the state median, so a shop in Albany competes on nearly the same wage terms as one in the city.
Rural shops should look at the nonmetropolitan area figures published for their state. In California, for example, the North Coast nonmetropolitan area had a median of $72,760, close to the state median[4], which shows that rural pay is not always far below the cities.
What drives the differences
Several forces push plumber pay up or down in a given area. Local construction activity and the age of the housing stock set demand. Licensing rules affect supply: places where it takes longer to qualify as a journeyman or master tend to have fewer license holders competing for work. The mix of residential service, new construction and commercial or industrial pipe work changes the average, because those segments pay differently. Union coverage also plays a part; 11.1% of employed construction wage and salary workers were union members in 2025, compared with 5.9% across the private sector[10], and coverage is much higher in some metros than others.
Cost of living sits behind all of it. A San Jose median that looks enormous on paper also has to cover very high local housing costs. When you compare your offer with another area’s, compare what the pay buys locally, not just the number.
Using wage data to set a pay range
Pick the right area
Use the metro where your technicians live and where competitors recruit, not the state average. For rural areas, use the nonmetropolitan area figure if one is published.
Map roles to percentiles
As a starting point: apprentices near the low end, licensed journeymen around the median, senior service techs and license holders toward the upper end. Adjust for your market.
Convert carefully
Hourly figures assume full-time hours. If your techs earn overtime, on-call pay or commission, compare total expected earnings, not just the base rate.
Add the rest of the offer
Health insurance, retirement contributions, a take-home vehicle and paid training are part of what candidates compare.
Check again every year
New wage data is published annually, and local competitors adjust faster than that when hiring is tight.
Wage data shows what employers pay, not what they should pay. Use it as a floor for staying competitive, then decide where you want to lead.
Beyond base pay, most service plumbers earn a meaningful share of their income from overtime, on-call shifts, commission or spiffs on sales and occasional tool allowances. Candidates know this and will ask what a typical technician actually took home last year. Have an honest answer ready, broken down by role, and avoid quoting best-case earnings that only one person on the team has reached.
Look up your own area in five minutes
- Open O*NET OnLine’s local wages page for plumbers, pipefitters and steamfitters (occupation code 47-2152.00).
- Choose your state from the menu, or enter a ZIP code to find the nearest areas.
- Find your metro or nonmetropolitan area and note the low, median and high figures, both hourly and annual.
- Repeat for neighboring metros where your techs could easily commute to work.
- Save the figures with the date, so you can compare when the next year’s data is released.
Keep this sheet with your pay bands and review it whenever you post a job or a technician asks for a raise. A short, factual answer such as “our journeyman range sits above the local median” is far more persuasive than “we pay well.”
Wages are moving faster than the survey
Annual wage surveys lag the market. Monthly BLS payroll data shows average hourly earnings for all employees at plumbing, heating and AC contractors were $42.38 in September 2026, about 4.4% above a year earlier[6]. That series covers every employee at those firms, not just plumbers, so it is not directly comparable with the occupational medians above. Its direction is the point: if your pay bands were set from older surveys, they are probably behind.
Cautions when comparing areas
- Cost of living differs. A higher median in one metro may buy less after housing costs.
- The occupation mixes residential service plumbers with commercial and industrial pipefitters, who often earn differently.
- Union coverage varies by area and affects published wages.
- Small metros have fewer survey responses, so their figures are less precise.
- Wage data excludes most benefits, which can add substantially to total compensation.
Example: setting a journeyman range in Austin
Example (fictional): A shop in Austin wants to hire two licensed journeymen. The owner checks the Austin-Round Rock-San Marcos figures: a median of $30.20 an hour and a 90th percentile of $38.90[5]. Knowing hourly earnings across the industry have risen since the survey, she sets a base range of $31 to $36 an hour for journeymen, adds paid on-call shifts and a take-home truck, and publishes the range in the ad. Two qualified applicants respond in the first week, and both say the posted range is why they applied.
Related reading: the US plumber shortage, writing a plumber job ad, how to hire plumbers, pay transparency laws and prevailing wage on public plumbing work.
Frequently asked questions
What is the average plumber salary in the US?
The median annual wage for plumbers, pipefitters and steamfitters was $63,800 in May 2025, or $30.67 an hour[1][2].
Which states pay plumbers the most?
Pay is generally higher in states such as New York and California than in Texas; in 2025 the New York median was $77,490 and the California median $72,830[3][4]. Check the wage tool for your own state and metro.
How should I use wage percentiles when setting pay?
Use your metro’s figures and map roles to percentiles: apprentices toward the low end, journeymen around the median, senior techs and license holders toward the top. Then add on-call pay, commission and benefits.
How often is plumber wage data updated?
The occupational wage survey is published once a year. Monthly payroll data on industry earnings can show whether wages have moved since.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
O*NET OnLine, U.S. Department of Labor (BLS 2025 wage data) (2025). Local Wages: Plumbers, Pipefitters, and Steamfitters (47-2152.00), New York (opens in a new tab) ↑
O*NET OnLine, U.S. Department of Labor (BLS 2025 wage data) (2025). Local Wages: Plumbers, Pipefitters, and Steamfitters (47-2152.00), California (opens in a new tab) ↑
O*NET OnLine, U.S. Department of Labor (BLS 2025 wage data) (2025). Local Wages: Plumbers, Pipefitters, and Steamfitters (47-2152.00), Texas (opens in a new tab) ↑
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Union Members, Table 3: Union affiliation of employed wage and salary workers by occupation and industry (opens in a new tab) ↑