Key takeaways
- Pick the first role by the bottleneck: field capacity (helper or licensed plumber) or time lost to phones and paperwork (office help).
- Plumber pay is wide: the lowest-paid tenth earned under $44,150 and the top tenth over $108,420 in 2025[1][2].
- Federal paperwork is short but strict: Form I-9 Section 2 within three business days of the first day of paid work[3].
- Most states require workers' comp from the first employee; Texas lets private employers choose but nonsubscribers must report to the state[4].
Signs you are ready
Plenty of plumbers run a one-truck business for years, and many do well. BLS counts 8% of plumbers, pipefitters and steamfitters as self-employed[5]. The decision to hire usually comes when the business starts losing money in ways that are easy to miss: jobs turned away, emergency calls that go to voicemail while you are under a sink, invoices written at midnight and quotes that never get followed up.
Run a two-week check before deciding. Write down every call you could not take, every job you turned down or pushed out more than a week, and every hour you spent on paperwork, supply runs and driving. If the lost work and the hours add up to more than a part-time wage, a hire is likely to pay for itself. If the gap is small or seasonal, a trusted subcontractor for overflow might be a better first step.
- You regularly book work more than a week out and customers go elsewhere.
- Jobs that need two people (water heater swaps, tub sets, sewer replacements) are slow or unsafe alone.
- You miss calls during jobs and do not get to call back until evening.
- You spend more than eight to ten hours a week on invoicing, scheduling and supply runs.
- You want to take time off without shutting the business.
Choosing the first role
The right first hire depends on the bottleneck. If you are short of hands in the field, a helper or apprentice increases what you can do on each job and lets you take bigger work. If you are short of licensed capacity, a journeyman can run a second truck. If you are losing work because nobody answers the phone or follows up on estimates, an office person may add more revenue than another plumber.
| First hire | Best when | Watch out for |
|---|---|---|
| Helper or apprentice | Two-person jobs are piling up; you want to grow a tech you trained | Supervision rules in your state; apprentices need training time and registration |
| Licensed journeyman | Demand supports a second truck now | Higher pay, a second van and insurance, and quality control when you are not there |
| Part-time office help | Missed calls and unpaid invoices are the main leak | Clear duties; remote help needs good software and phone setup |
A middle route many solo operators use is to hire a helper first and cover the phones some other way, with a part-time person, an answering service or an AI phone agent such as Ava that answers calls, takes job details and books routine work while you are on a job. That keeps the first payroll hire focused on the field.
If you hire an apprentice, plan for training. Plumbing apprentices typically get 2,000 hours of paid on-the-job training a year plus technical instruction[6], and most states require apprentices to be registered and to work under a licensed plumber. Check your state board's rules before the first day.
What a first employee costs
Wages vary by region, license level and experience. In May 2025 the median annual wage for plumbers, pipefitters and steamfitters was $63,800[7]; the lowest-paid 10% earned less than $44,150[1] and the highest-paid 10% more than $108,420[2]. Helpers and first-year apprentices are usually near or below the low end; licensed journeymen with service experience sit around or above the median.
Source: U.S. Bureau of Labor Statistics, 2025[7]
Show the data
| Item | Value |
|---|---|
| Lowest 10% | $44,150 |
| Median | $63,800 |
| Highest 10% | $108,420 |
Wages are not the whole cost. Across private industry, benefits made up 30.0% of employer compensation costs in June 2026[8]. A small shop may offer fewer benefits than that average, but it still pays employer payroll taxes, unemployment insurance and workers' compensation, and usually buys extra tools, uniforms and sometimes a second vehicle.
Example: a fictional solo plumber in a mid-cost area hires a helper at $20 an hour for 40 hours a week. Wages come to about $41,600 a year. With employer payroll taxes, workers' comp, a modest paid time off policy, uniforms and tools, the plumber budgets roughly $52,000 to $56,000 for the year. If the helper lets the business finish one extra job a day at a typical gross margin, the hire pays for itself well before year end. Run your own numbers with your accountant and insurance agent.
The paperwork, in order
The federal steps are short. The IRS lists three things to secure when you hire: verify each hire's identity and employment authorization on Form I-9, get each employee's name and Social Security number for Form W-2, and keep a signed Form W-4 for income tax withholding[9]. If a new hire does not give you a W-4, the IRS says to withhold as if the employee is single[9].
Timing on Form I-9 is strict. USCIS requires employers to complete Section 2 within three business days of the employee's first day of work for pay; if the employee started on Monday, Section 2 is due by Thursday[3]. Keep the completed form on file, separate from the personnel file.
Workers' compensation is required from the first employee in most states. Texas is different: private employers there can choose whether to carry coverage, but employers without it must report to the state that they do not have coverage and must report qualifying injuries[4]. Even where it is optional, going without coverage removes protection from lawsuits by injured employees, and many general contractors and property managers will not hire a shop without it.
Get an EIN and state accounts
If you only have a sole proprietor setup with no employees, confirm your federal employer ID and register for state withholding and unemployment insurance.
Buy workers' comp
Get quotes from an agent who knows contractor class codes before the start date, not after.
Choose a payroll provider
Use a service that files payroll taxes and new-hire reports for you; it is cheaper than one mistake.
Prepare the offer
Pay rate, schedule, overtime, on-call expectations, tools, vehicle use and start date, in writing.
Day one forms
Form I-9 Section 1 on day one, W-4, state withholding form, direct deposit and emergency contacts.
Within three business days
Complete I-9 Section 2 after examining the employee's documents in person.
Report the hire
Make sure your state's new-hire report is filed, by you or your payroll provider.
Post required notices
Federal and state labor law posters where employees can see them, or electronically for remote staff.
Set the rules before the first day
A two-person shop does not need a thick handbook, but it does need written basics. Write one or two pages covering pay days, overtime, how hours are recorded, on-call duties, vehicle and phone rules, tool responsibility, safety and what to do if hurt on the job. Decide how drive time between jobs and supply house runs are paid. Agree how the helper gets to the first job of the day: meeting at the shop, riding with you, or driving their own car to the site.
Think about licensing and liability too. A helper working in a customer's home is representing your license. Tell your insurance agent before the start date, confirm your general liability policy covers employees, and check whether your state requires the helper to be registered as an apprentice before touching any plumbing work.
The first 30 days
- Week one: safety basics, van layout, how to protect a customer's home, how you talk to customers. The helper watches more than works.
- Week two: hands-on tasks with you beside them: rough-in, fixture sets, water heater removals, cleanup.
- Week three: small tasks done alone while you are on site, with a check before you leave.
- Week four: a short review. What is going well, what needs work, and whether the role is meeting the need you hired for.
Expect to be slower for the first two weeks while you teach. That is normal. By the end of the first month the helper should be saving you time on every two-person job, and you should know whether the hire is working. Related reading: workers' comp for plumbing companies and background checks for technicians.
Frequently asked questions
Should a solo plumber hire a helper or another licensed plumber first?
Hire a helper if two-person jobs are the bottleneck and you want to train someone. Hire a licensed plumber if demand already supports a second truck and you can manage quality while you are elsewhere.
When is Form I-9 due for a new employee?
Section 1 on the first day of work for pay, and Section 2 within three business days of that first day.
Do I need workers' comp for one employee?
In most states, yes. Texas lets private employers choose, but employers without coverage must report that to the state and lose some legal protections.
Can I pay my first helper as a 1099 contractor?
Usually not. A helper who works under your direction, on your jobs, with your tools is an employee under the IRS and most state tests.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Citizenship and Immigration Services (2026). Completing Section 2, Employer Review and Attestation (opens in a new tab) โ
Texas Department of Insurance, Division of Workers' Compensation (2026). Workers' compensation: employer resources (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ
Internal Revenue Service (2026). Hiring employees (opens in a new tab) โ