Hiring training

Running a hands-on skills test for applicants

Set up a hands-on skills test for plumbing applicants: six bench stations, timings, a scoring rubric, safety rules and how to use the results in an offer.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why test with tools in hand
  2. Six stations to start with
  3. Building the test area
  4. Running the test day
  5. Scoring that holds up
  6. What to watch beyond the score
  7. From score to offer
  8. Timing, pay and fairness
  9. Mistakes shops make with skills tests
  10. Example: calibrating on your own team
  11. Frequently asked questions
  12. References
Hiring training: Running a hands-on skills test for applicantsArticle coverHIRING TRAININGRunning a hands-onskills test forapplicantsAva for PlumbersInsightsHiring training: Running a hands-on skills test for applicantsArticle coverHIRING TRAININGRunning a hands-onskills test forapplicantsAva for Plumbers

Key takeaways

  • A bench test shows in 90 minutes what an interview cannot: whether the applicant can actually make a joint, read a drawing and find a fault.
  • Build stations around the work you do most, score each on a written rubric and give every applicant the same test.
  • Treat safety as a scored station; specialty trade contractors logged 2.3 recordable injury and illness cases per 100 full-time workers in 2024[1].
  • Use the score to place the hire on your pay ladder; plumber pay runs from about $21 to $52 an hour across the middle 80%[2].
  • Schedule testing days before the summer peak, when contractor employment climbs[3].

Why test with tools in hand

Interviews reward people who talk well. A skills test rewards people who work well, and in a trade where most learning happens on the job that is what you need to know. BLS says apprentices typically get 2,000 hours of paid on-the-job training a year plus technical instruction in safety, local codes and blueprint reading[4]. Two applicants with the same years on paper can be years apart in what they can do.

A good test is short, standardized and close to real work. It should take 60 to 90 minutes, use the materials you stock and be scored by someone who did not interview the applicant, so the score is not colored by a good conversation.

Six stations to start with

A starter test for service technician applicants
StationTaskTimeWhat you score
1. JoiningSweat one copper joint and make one press or PEX connection15 minClean prep, no leaks under test pressure, neat work
2. Drain assemblyAssemble a P-trap and tailpiece to a fixed drain stub10 minCorrect parts and slope, no leaks, sensible order
3. Fault findingFind two planted faults on a mock-up (for example a failed fill valve and a reversed hot and cold)15 minFaults found, logical checks, explanation
4. Drawing and measurementRead a simple isometric and list the fittings and lengths10 minAccuracy of the list
5. Customer explanationExplain the station 3 faults and two repair options to an evaluator playing the homeowner5 minPlain language, options, honesty
6. Safety walkSpot hazards set up in the test area5 minHazards found and what they would do about each

Adjust for the role. Helpers and first-year apprentices should get stations 2, 4 and 6 plus a simpler joining task. New construction crews need more rough-in layout and less customer explanation. Commercial service roles might add a backflow or flush-valve station.

Building the test area

  1. Use a bench, not a customer home

    Build mock-ups on a plywood wall in the shop: a copper manifold with test ports, a drain stub, a toilet and a small electric water heater for fault finding.

  2. Stage identical materials

    Put the same fittings, pipe lengths and tools at each station for every applicant. Label anything the applicant must not use.

  3. Plant the faults the same way each time

    Write down exactly how each fault is set so different evaluators reproduce it.

  4. Set up a pressure test

    Use an air or water test rig to check joints; a leak the evaluator can see removes arguments.

  5. Prepare a hazard scene

    For the safety walk, place three to five hazards such as an unguarded extension cord, a missing fire extinguisher near the soldering area or a ladder on a slippery surface.

  6. Write the scoring sheet

    One page, the same for everyone, with the pass marks agreed before the first applicant arrives.

Running the test day

Treat the test like a scheduled job with a start time, a lead and a finish. Applicants judge your company by how organized the day is, and the best ones are interviewing elsewhere too.

  1. Before the applicant arrives, the evaluator resets every station, plants the faults from the written setup sheet and checks the pressure rig holds.
  2. Greet the applicant on time, walk them through the stations and the time limits, and point out the fire extinguisher, first aid kit and exits.
  3. Ask whether they need anything to do their best work, such as their own glasses or gloves, and confirm they understand that unsafe work stops the test.
  4. Run the stations in the same order for everyone. Keep conversation to instructions; coaching during the test makes scores meaningless.
  5. Score each station immediately after it finishes, while the details are fresh, and photograph joints and assemblies before resetting.
  6. Finish with ten minutes for the applicant's questions and tell them when they will hear back.

One evaluator can run the test for one applicant at a time. If you test several people on the same morning, stagger start times by 20 minutes and use a second evaluator for the customer explanation station so nobody waits.

Scoring that holds up

Score each station from 0 to 4 against written descriptions. A shared rubric makes scores comparable across evaluators and over time, and it keeps the test fair if a rejected applicant asks why.

  • 0: did not attempt or unsafe.
  • 1: attempted, did not complete or major leak or error.
  • 2: completed with minor issues an experienced tech would fix.
  • 3: completed correctly at a normal pace.
  • 4: completed correctly, quickly and explained choices without prompting.

Set a minimum on the safety station that cannot be offset by speed elsewhere. Any unsafe act, such as soldering near combustibles without protection, ends the test politely. That rule matters: specialty trade contractors recorded 608 fatal work injuries in 2024[1].

What to watch beyond the score

The rubric gives you a number. Your evaluator's notes give you the context that decides close calls. Ask evaluators to write one line per station on how the applicant worked, not just the result.

  • Order of work: did they read the task and lay out parts before cutting, or start and backtrack?
  • Tool handling: do they use the right tool, put it back and keep the bench clear, or is the station a mess after ten minutes?
  • Checking their own work: strong applicants pressure test or visually inspect before calling a station done.
  • Response to a problem: when a joint leaks, do they calmly redo it or blame the material?
  • Questions they ask: asking which code applies or what the customer wants is a good sign at any experience level.
  • Communication with the evaluator: brief, clear updates are what you want from a tech on the radio with dispatch.

A high score with poor notes on checking work or handling problems is a reason for a closer reference check. A middling score with excellent notes often points to someone who will learn quickly with good supervision.

From score to offer

Map total scores to levels on your pay ladder so the test sets pay, not negotiation skill. O*NET's national data show plumbers earning from about $21.22 an hour at the 10th percentile to $52.13 at the 90th, with a $30.67 median[2]. Your ladder should sit inside your local version of that range.

Example placement bands; set your own after testing current staff
Total score (of 24)PlacementNext step
Under 10Not ready for a field roleOffer helper role or decline
10 to 15Helper or early apprenticeStructured ride-alongs and training plan
16 to 20Service tech with supportPair with senior tech for first month
21 to 24Independent service techStandard onboarding, faster to solo calls

Calibrate the bands by testing two or three of your current techs first. If your best tech scores 19, a band that starts at 21 is wrong.

Timing, pay and fairness

Plan testing days around the hiring season. Plumbing, heating and air-conditioning contractor employment rose from about 1,293,700 in January 2025 to 1,335,400 in July, and reached 1,357,800 in August 2026[3]. Testing in late winter and spring lets you hire before the summer rush rather than during it.

Employment at plumbing, heating and AC contractorsSelected months, not seasonally adjusted
Employment at plumbing, heating and AC contractorsLine chart. Jan 2025: 1,294 thousand employees; Jul 2025: 1,335 thousand employees; Dec 2025: 1,318 thousand employees; Jan 2026: 1,306 thousand employees; Aug 2026: 1,358 thousand employees.1,280 thousand employees1,300 thousand employees1,320 thousand employees1,340 thousand employees1,360 thousand employeesJan 2025Dec 2025Aug 2026Jan 2025: 1,294 thousand employeesJul 2025: 1,335 thousand employeesDec 2025: 1,318 thousand employeesJan 2026: 1,306 thousand employeesAug 2026: 1,358 thousand employees1,358 thousand employees1,294 thousand employeesEmployment at plumbing, heating and AC contractorsLine chart. Jan 2025: 1,294 thousand employees; Jul 2025: 1,335 thousand employees; Dec 2025: 1,318 thousand employees; Jan 2026: 1,306 thousand employees; Aug 2026: 1,358 thousand employees.1,280 thousand employees1,300 thousand employees1,320 thousand employees1,340 thousand employees1,360 thousand employeesJan 2025Aug 2026Jan 2025: 1,294 thousand employeesJul 2025: 1,335 thousand employeesDec 2025: 1,318 thousand employeesJan 2026: 1,306 thousand employeesAug 2026: 1,358 thousand employees1,358 thousand employees1,294 thousand employees

Source: U.S. Bureau of Labor Statistics, Current Employment Statistics, 2025[3]

Show the data
PeriodValue
Jan 20251,294 thousand employees
Jul 20251,335 thousand employees
Dec 20251,318 thousand employees
Jan 20261,306 thousand employees
Aug 20261,358 thousand employees
  • Keep the test short and on a bench. If an applicant does productive work for you or the test runs long, pay for the time; check your state rules.
  • Use the same stations, materials, time limits and rubric for everyone applying to the same role.
  • Test only what the job requires. A helper role does not need a code exam.
  • Offer reasonable accommodations if asked, as long as the essential task is still tested.
  • Keep the score sheets with the hiring file.

Mistakes shops make with skills tests

  • Testing tricks instead of daily work. A rare fitting nobody stocks tells you little about service calls.
  • Letting the interviewer also score the test. A friendly conversation inflates the bench score.
  • Changing the test between applicants. If you improve a station, start a new version and do not compare scores across versions.
  • No time limits. Without them, a slow but careful applicant and a fast careless one can get the same score.
  • Skipping feedback. Telling a rejected applicant which station let them down costs a minute and protects your reputation in a small local labor market.

Example: calibrating on your own team

Example (fictional): a 12-tech shop runs the six stations on four current employees before testing anyone new. Its strongest service tech scores 22, a solid second-year apprentice 15, a new construction plumber 17 with a low customer explanation score and a helper 9. The owner sets the bands at those breakpoints and rewrites station 3 because nobody found the second fault within the time limit.

Example (fictional) next season: the shop tests eleven applicants, hires four and places two of them one level lower than they asked for in the interview, each with a written path to the next band. Use the result with our interview question bank and a 90-day onboarding plan.

Frequently asked questions

How long should a plumbing skills test take?

About 60 to 90 minutes for a service technician. Shorter tests miss diagnosis and customer skills; longer ones lose applicants and may need to be paid.

Should I pay applicants for a skills test?

If the test is long or the applicant does productive work for your business, pay for the time. Rules vary by state, so check with your employment adviser.

What should a plumber skills test include?

Joining, drain assembly, fault finding on a mock-up, reading a drawing, explaining a repair to a homeowner and a safety walk, each scored on a written rubric.

References

  1. U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ†‘

  2. O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics, Current Employment Statistics (2025). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822001) (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo