Key takeaways
- Average hourly earnings at plumbing, heating and AC contractors reached $42.38 in September 2026, up about 4.4% in a year, so every hire you lose early is more expensive to replace[1].
- The construction quits rate rose to 2.4% in September 2026 (preliminary), from 1.5% a year earlier[2].
- Do the paperwork, truck and tool setup before day one so the first week is spent learning, not waiting.
- Use written sign-offs at 30, 60 and 90 days; they tell the new tech exactly what earns independence and the next raise.
- Hold a 15-minute check-in at each milestone with the same five questions.
Why the first 90 days decide whether a tech stays
Pay is not the only reason new techs leave early. Many of the causes are easy to prevent: a confusing first week, a mentor who is too busy, or a new hire being sent alone to a call they were not ready for. Those mistakes are getting more expensive. Average hourly earnings at plumbing, heating and air-conditioning contractors were $42.38 in September 2026 (preliminary), up from $40.59 a year earlier[1], and private employers paid an average of $46.89 per hour worked in total compensation in June 2026[3]. Each new tech is a large investment before they bill a single hour alone.
People are also more willing to leave. The quits rate in construction was 2.4% in September 2026 (preliminary), up from 1.5% in September 2025[2]. A clear, week-by-week plan is the cheapest retention tool you have, because it shows the new hire that someone has thought about their success.
Source: U.S. Bureau of Labor Statistics, Current Employment Statistics, 2026[1]
Show the data
| Period | Value |
|---|---|
| Jan 2025 | $39.3 |
| Sep 2025 | $40.59 |
| Aug 2026 | $42.65 |
| Sep 2026 | $42.38 |
Before day one
The most common onboarding failure is a new tech spending their first morning waiting for a laptop login or a van key. Finish these before the start date and assign one person to confirm each item.
- Payroll, tax forms, direct deposit and any tax-credit screening sent electronically a week before the start.
- Driver's license and insurance approval for the company vehicle confirmed.
- Uniforms, boots policy, PPE and a starter tool set ready in the new hire's size.
- Field software account created, with the login tested on the phone they will use.
- Mentor assigned and told the start date; their schedule for week one includes time to teach, not just a full call board.
- A printed copy of this plan with the new tech's name on it.
Week one: orientation and shadowing
Day 1: the company and the shop
Meet the owner or general manager, tour the warehouse, learn the truck stock system and how jobs flow from the phone call to the invoice. Safety orientation: PPE, ladders, confined spaces, gas smells, when to stop work. Leave on time.
Day 2: software and paperwork
Clock in and out, view the schedule, open a job, take photos, write notes, build a quote and collect payment in the field software. Practise on test jobs.
Days 3 and 4: ride with the mentor
Observe and assist on four to six calls. The new hire carries tools, shuts off water, takes the before and after photos and listens to how the mentor talks to customers.
Day 5: review
Thirty minutes with the service manager. What surprised you, what was unclear, what do you want to see more of next week? Agree on the first sign-off items.
BLS notes that apprentices typically log about 2,000 hours of paid on-the-job training a year, with technical instruction in safety, codes and blueprint reading[4]. Even an experienced hire needs this week; they are learning your systems, your customers and your standards, not the trade.
Weeks two to four: supervised work
The new hire now does the work while the mentor watches and checks. Choose calls that match the skills you want signed off first. For an experienced tech, that might be water heater replacements and drain clearing; for a helper, faucets, toilets and supply lines.
- Each day, the mentor picks one call where the new hire leads from greeting to payment.
- The mentor checks the work before the customer sees it, and gives feedback in the van, not in front of the customer.
- The new hire practises explaining the repair and the options in plain language, then presents a quote with the mentor present.
- Safety is reviewed daily: specialty trade contractors recorded 2.3 recordable injury and illness cases per 100 full-time workers in 2024, so a near miss is a teaching moment, not a secret[5].
- End of week four: first sign-off review.
Days 31 to 60: first solo calls
Once the 30-day items are signed off, the new tech starts running simple calls alone with a named backup on the phone. Dispatch should know which call types are cleared and should not send anything else, even on a busy day. That rule protects the customer, the tech and your reviews.
- Start with one or two solo calls a day and keep the rest as ride-alongs.
- The mentor reviews every solo ticket at the end of the day: photos, notes, quote and outcome.
- Callbacks on solo work are reviewed together within 24 hours, without blame, to find the training gap.
- Add one new call type each week as skills are shown on supervised jobs.
Days 61 to 90: independence and the next step
By the third month the new tech should be running most standard calls alone. The focus shifts to quality and speed: first-time fix rate, callbacks, ticket notes and customer feedback. This is also when you talk about what comes next, such as on-call rotation, a license exam date or a specialty like drain cameras or tankless water heaters.
| Milestone | Signed off when the tech can | Signed by |
|---|---|---|
| Day 30 | Use the software end to end, follow safety rules, complete core repairs with supervision | Mentor |
| Day 60 | Run cleared call types alone with phone backup, present quotes, leave clean job notes | Mentor and service manager |
| Day 90 | Run most standard calls alone, join on-call rotation with backup, meet callback target | Service manager |
Tie the 90-day sign-off to something the tech can feel: the end of probation, a raise, a take-home truck or a place on the on-call rotation. If the sign-off slips, set a new date with specific items rather than letting it drift.
The mentor's job, in writing
Most onboarding plans fail at the mentor. The busiest, most productive tech gets the new hire because they know the most, then has no time to explain anything. Choose the mentor for patience and clear explanations, and make the role explicit.
- Reduce the mentor's call load in week one and on days the new hire leads a call, or pay a mentoring bonus at each sign-off so teaching does not cost them income.
- Ask the mentor for a two-minute debrief after each call: what went well, one thing to change.
- Have the mentor tell the service manager early if the new hire is struggling, unsafe or unhappy. Surprises at day 90 are a management failure, not a hiring one.
- Rotate the new hire to a second tech for at least two days so they see more than one way of working.
Check-in script for 30, 60 and 90 days
- "What is going better than you expected?"
- "What is harder than you expected?"
- "Is there a call type you feel unprepared for?"
- "Is your mentor available when you need them?"
- "Is there anything that would make you think about leaving?"
Write down the answers and one action for each problem. The last question feels uncomfortable, but it is how you hear about a scheduling conflict or a difficult crew member while you can still fix it. The same questions work later as a stay interview.
Example: one onboarding, start to finish
Example (fictional): a tech with three years of service experience joins a 15-person shop. Paperwork and the van are ready before day one. By day 30 she has signed off core repairs and the software; by day 60 she runs water heater and drain calls alone; by day 90 she joins the on-call rotation with a senior tech as backup. At the 60-day check-in she mentions that she has not been shown the company's commercial accounts, so the manager adds two commercial ride-alongs.
Example (fictional) contrast: the shop's previous hire, onboarded without a plan, quit in week seven after being sent alone to a sewer camera job. The owner now uses the same plan for every field hire and adapts it for career changers, as described in our guide to hiring from other trades, and for office staff in CSR hiring and training.
Frequently asked questions
How long should onboarding take for a plumbing technician?
Plan for 90 days with written sign-offs at 30, 60 and 90. Experienced techs move through faster, but they still need to learn your software, standards and call types.
What should a new plumber do in the first week?
Orientation and safety on day one, software practice on day two, ride-alongs with a mentor for two or three days and a review at the end of the week.
When should a new tech run calls alone?
When they have been signed off on that call type during supervised work, usually in the second month. Dispatch should only send solo calls that are cleared.
References
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Survey, Table 4: Quits levels and rates by industry and region, seasonally adjusted (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ