Call handling

Handling tenant calls: authorization and billing

How plumbing offices handle tenant calls: verify the owner or manager, set not-to-exceed amounts, confirm who pays and document approval before dispatch.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why tenant calls go wrong
  2. The four questions
  3. Verify before dispatch
  4. Not-to-exceed amounts
  5. Emergencies when nobody answers
  6. Access and the tenant's home
  7. Scripts
  8. Property management accounts
  9. Example: a rental call done right
  10. Common mistakes
  11. Frequently asked questions
  12. References
Call handling: Handling tenant calls: authorization and billingArticle coverCALL HANDLINGHandling tenant calls:authorization andbillingAva for PlumbersInsightsCall handling: Handling tenant calls: authorization and billingArticle coverCALL HANDLINGHandling tenantcalls: authorizationand billingAva for Plumbers

Key takeaways

  • When a tenant calls, the person with the leak is usually not the person who can approve or pay for the repair. Find out who is, before the truck rolls.
  • Ask four questions on every rental call: who you are, who owns or manages the property, who approves the work and up to what amount, and who receives the invoice.
  • Get approval in writing, by text or email, with a not-to-exceed amount and a work order number if the manager uses one.
  • With about a third of occupied US homes rented[1], tenant calls are routine. A written process saves trips, disputes and unpaid invoices.

Why tenant calls go wrong

A tenant rings because water is coming through the bathroom ceiling. The CSR books it like any other job, the technician arrives, finds the problem and gives a price. The tenant says they cannot approve that, or that the landlord always pays. Nobody can reach the landlord. The technician either leaves without doing the work or does it and sends an invoice that nobody agrees to pay.

Each of those outcomes costs you. Average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026[2], and a visit that ends without approval is paid time with no invoice behind it. A repair done without approval can become a debt that takes months to collect, or never does.

About a third of occupied US homes are rentedOccupied housing units, third quarter of 2026. The renter-occupied share is the remainder of the 65.5% homeownership rate.
About a third of occupied US homes are rentedDonut chart. Owner-occupied: 65.5%; Renter-occupied: 34.5%.Owner-occupied: 65.5%Renter-occupied: 34.5%
  • Owner-occupied 65.5%
  • Renter-occupied 34.5%

Source: U.S. Census Bureau, 2026[1]

Show the data
ItemValue
Owner-occupied65.5%
Renter-occupied34.5%

The US homeownership rate was 65.5% in the third quarter of 2026[1], so roughly a third of occupied homes are rented. In many neighborhoods, tenant calls are a large share of the phone traffic.

The four questions

Ask these on every call where the caller might not own the property. The trigger question comes first:

"Do you own the home, or are you renting?"

If they rent:

  1. "Who owns or manages the property, and what's the best number and email for them?"
  2. "Has your landlord or manager asked you to call us, or have they already approved a plumber?" Some managers have a preferred vendor; some want tenants to call them first.
  3. "Is there a work order number, or a limit they've told you they can approve?"
  4. "Who should receive the invoice: the owner, the management company or you?"

Write down the caller's relationship to the property exactly: tenant, family member of the owner, property manager, maintenance worker, real estate agent. Each has different authority.

Verify before dispatch

  1. Call or text the owner or manager

    Use the contact details the tenant gave. For known property management clients, use the contact on file, not only the one the tenant offers.

  2. Explain the problem briefly

    What the tenant reported, any photos and how urgent it is.

  3. Agree the scope and the limit

    "We'll diagnose and repair up to a set amount. If it's more, we'll call you before doing anything."

  4. Get it in writing

    A reply by text or email saying "Approved, up to the agreed amount, invoice to us" is enough for most shops. Save it to the job.

  5. Confirm billing details

    Legal name of the bill payer, billing email and any purchase order or work order number.

  6. Tell the tenant

    Confirm the time window, who approved it and that the technician will call when on the way.

For property managers, a text is usually the fastest route. With 91% of US adults owning a smartphone[3], a short message with the tenant's photos attached often gets approval within minutes.

Not-to-exceed amounts

A not-to-exceed amount, sometimes called an NTE, is the most useful tool for rental work. It lets the technician go ahead with repairs up to an agreed figure without another call, and it tells everyone when to stop and ask.

When approval is needed on rental jobs
SituationApproval neededNotes
Diagnosis onlyOwner or manager approves the visit feeTenant may agree to pay if the owner will not, in writing
Repair under the not-to-exceed amountAlready approvedNote the amount and approver on the job
Repair over the not-to-exceed amountNew approval before workTechnician calls or texts the approver from site
Replacement of a major item, such as a water heaterAlways fresh approvalSend photos and the quote
Emergency with approver unreachableYour written emergency policyUsually limited to stopping the water and making safe

Agree standing NTE amounts with regular property management clients, in writing, so every job starts pre-approved up to that level.

Emergencies when nobody answers

Sometimes water is pouring through a ceiling at 11 pm and the landlord does not pick up. Decide your policy in advance and write it down, because the on-call technician should not be making it up in a stairwell. A common approach:

  • Stop the water: close the fixture valve or the main, and make the area safe.
  • Do only the minimum work needed to prevent further damage, such as capping a burst line.
  • Document everything with time-stamped photos and notes.
  • Keep trying the owner or manager by call and text, and record each attempt.
  • Explain to the tenant, before starting, what you will do now, what will wait for approval and who may be billed.

Water damage is expensive: the average homeowners claim for water damage and freezing was about $15,400 over 2019 to 2023[4]. Most owners would rather pay for an emergency shutoff than a ruined unit, but agree this with your regular clients ahead of time. Landlord and tenant repair duties vary by state and by lease, so ask your attorney to review the policy wording; your CSRs should not give tenants legal advice.

Access and the tenant's home

Authorization covers money; access covers the door. Even when the owner has approved the repair, the technician is entering someone else's home. Confirm with the tenant who will be there, whether pets need to be secured and whether the owner or manager has asked to be present. If the manager supplies a key or lockbox code, record where it came from and never share it with anyone else.

If the tenant will not be home, get the manager's written confirmation that entry has been arranged with the tenant. Arriving at an empty rental with a key and no record that the tenant was told is an awkward position for your technician, and an easy one to avoid with a single text.

Scripts

To the tenant:

"Thanks for letting us know. Because it's a rental, we'll need your landlord or manager to approve the repair. Can you give me their name and number? I'll contact them now and call you back within 15 minutes with a time."

To the property manager:

"Hi, this is Sam from Granite Plumbing. Your tenant at 12 Oak Court, unit 3, reported a leak under the kitchen sink. Water is off at the valve. Can we diagnose and repair up to your usual limit, with the invoice to your office? I can text you photos."

To a tenant who wants to pay themselves:

"That's fine. We'll need you to confirm in writing that you're responsible for the invoice, and we'll take payment at the end of the visit. Do you want us to let your landlord know as well?"

Property management accounts

If you work with property managers regularly, set up an account for each one:

  1. Billing entity, billing email and payment terms.
  2. Approved contacts who can authorize work, and how: text, email or work order portal.
  3. Standing not-to-exceed amounts for routine work and emergencies.
  4. Rules for tenant access: keys, lockboxes, whether a manager must attend.
  5. Their preferred photo and reporting format after each job.
  6. A list of properties and units, with notes about shutoffs and water heaters.

With an account in place, the CSR's job on a tenant call becomes a quick lookup instead of a negotiation.

Example: a rental call done right

Example: at 4:10 pm a fictional tenant calls about a toilet overflowing in a third-floor apartment. The CSR asks whether she owns or rents, then guides her to close the supply valve behind the toilet. The building belongs to a management company that has an account with the shop, with a standing approval limit for routine repairs.

The CSR texts the manager the tenant's photo and the job details, then books the visit within the standing limit. Example: the technician clears a blockage and replaces a worn fill valve, the total is under the limit, the invoice goes to the management company's billing email, and the manager receives the photos and a one-line summary the same evening.

Common mistakes

  • Assuming the caller owns the home because they sound confident.
  • Taking the landlord's number from the tenant for a known management client, instead of using the verified contact on file.
  • Verbal approvals with no written record.
  • No not-to-exceed amount, so every change of scope means a call nobody answers.
  • Invoicing the tenant by default because they were the one at the door.
  • Leaving the emergency policy to the on-call technician's judgment at midnight.

Add the own-or-rent question to your call intake checklist so no rental call slips through.

Frequently asked questions

Who pays the plumber when a tenant calls?

It depends on the lease and the cause of the problem. Do not assume. Ask the owner or property manager to confirm in writing who will receive the invoice before the visit, or get the tenant's written agreement if they will pay.

Can a tenant authorize plumbing repairs?

Usually only if the owner or manager has given them that authority, or if the tenant agrees in writing to pay. Get approval from the owner or manager whenever you can.

What is a not-to-exceed amount?

An agreed maximum the technician can spend on a repair without asking again. It speeds up rental jobs and tells everyone when to stop and get fresh approval.

What if a tenant has an emergency and the landlord cannot be reached?

Follow a written emergency policy: stop the water, make the area safe, do only the minimum work to prevent more damage, document everything and keep trying the owner or manager.

References

  1. U.S. Census Bureau (2026). Quarterly Residential Vacancies and Homeownership, Third Quarter 2026 (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

  3. Pew Research Center (2026). Mobile Fact Sheet (opens in a new tab) โ†‘

  4. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo