Call handling

The information to capture on every plumbing call

A plumbing call intake checklist: the access, pets, fixture age, photo and decision-maker details that save a second trip, plus how to make them stick.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why intake decides the visit
  2. The checklist
  3. Why each group matters
  4. Owner or tenant: always ask
  5. Photos before the visit
  6. Minimum intake versus full intake
  7. Make the checklist stick
  8. Hand the intake to the technician
  9. Intake after hours
  10. Example: one field, one saved trip
  11. Common intake mistakes
  12. Frequently asked questions
  13. References
Call handling: The information to capture on every plumbing callArticle coverCALL HANDLINGThe information tocapture on everyplumbing callAva for PlumbersInsightsCall handling: The information to capture on every plumbing callArticle coverCALL HANDLINGThe information tocapture on everyplumbing callAva for Plumbers

Key takeaways

  • Second trips usually come from missing information, not from bad technicians: the wrong part, no access, nobody home or nobody able to approve the work.
  • Capture eight groups of details on every call: contact, property and access, the problem, equipment and age, the decision-maker, photos, timing and safety.
  • Ask whether the caller owns or rents. About a third of occupied US homes are rented[1], and a renter often cannot approve repairs.
  • Labor costs keep rising, with average hourly earnings at plumbing contractors up from $40.59 to $42.38 in a year[2], so every avoidable trip costs more.

Why intake decides the visit

Some plumbers travel to worksites every day[3], and every visit is planned from what the office wrote down on the call. If the CSR captured the wrong address, missed the gate code or did not ask who can approve the work, the technician finds out at the door, and the visit becomes a return trip.

Every wasted trip costs more each yearAverage hourly earnings, all employees, US plumbing, heating and AC contractors. September 2026 is preliminary.
Every wasted trip costs more each yearComparison. September 2025: $40.59; September 2026: $42.38.$40.59September 2025September 2025: $40.59$42.38September 2026September 2026: $42.38Every wasted trip costs more each yearComparison. September 2025: $40.59; September 2026: $42.38.$40.59September 2025September 2025: $40.59$42.38September 2026September 2026: $42.38

Source: U.S. Bureau of Labor Statistics, Current Employment Statistics, 2026[2]

Show the data
ItemValue
September 2025$40.59
September 2026$42.38

A wasted trip costs paid time, fuel and an empty slot on the board that could have gone to another customer. Average hourly earnings at plumbing, heating and AC contractors were $42.38 in September 2026, up from $40.59 a year earlier[2]. Good intake is the cheapest way to protect that time.

The checklist

Contact details:

  • Full name and the best mobile number, read back digit by digit.
  • A second contact if the caller will not be at the property.
  • Preferred contact method: call or text, and in which language.

Property and access:

  • Service address and ZIP code, confirmed against your service area.
  • Property type: house, condo, apartment, commercial unit or rental.
  • Gate codes, lockbox details, parking and which door to use.
  • Pets, and whether they will be secured.
  • Where the problem is in the building, and how to reach it: crawl space, attic, finished ceiling, slab.

The problem:

  • What the caller sees, hears or smells, in their own words.
  • When it started and whether it is getting worse.
  • Which fixtures are affected, one or several.
  • Whether water is off at the main or a fixture valve.
  • Anything already tried, including drain cleaners or DIY repairs.

Equipment and age:

  • For water heaters: tank or tankless, fuel type, approximate age and size if visible on the label.
  • For fixtures: brand if known and approximate age.
  • Approximate year the home was built. Lead pipes are more likely in older cities and homes built before 1986[4], and older homes often hide galvanized or other materials that change the job.

Decision-maker and billing:

  • Does the caller own the property or rent it?
  • If they rent: owner or property manager name, contact and any approval limit.
  • For commercial sites: purchase order or work order number and the site contact.
  • Who will pay, and whether a home warranty or insurance claim is involved.

Photos:

  • Ask permission to text a link for photos of the problem, the fixture, the water heater label or the shutoff valve.

Timing and safety:

  • Time windows that work, and anything that rules out a time.
  • Any vulnerable occupants, such as infants, older relatives or someone with medical needs.
  • Any safety concerns: water near electrics, sewage inside, gas smell.

Why each group matters

What intake prevents
GroupWhat goes wrong without itFix at intake
ContactTechnician cannot reach the customer on arrivalRead back the mobile number; get a second contact
AccessLocked gate, no parking, unsafe crawl spaceAsk for codes, parking and access route
ProblemWrong tools or the wrong technicianCapture symptoms, fixtures affected and history
Equipment and ageWrong part on the truckAsk for type, fuel, age, label photo
Decision-makerTenant cannot approve; work stopsAsk own or rent; get the owner's approval path
PhotosDiagnosis starts from scratch on siteRequest photos by text before the visit
TimingNobody home when the technician arrivesConfirm window and who will be there
SafetyTechnician walks into a hazardAsk about water near electrics, sewage, gas

Owner or tenant: always ask

The US homeownership rate was 65.5% in the third quarter of 2026[1], which means roughly a third of occupied homes are rented. Tenants are often the ones who call, because they are the ones with the leak. Many cannot approve repairs or agree to pay for them.

"Do you own the home, or are you renting? ... Thanks. Who should we contact to approve the repair, and is there a limit they've set for maintenance?"

Capturing the owner's or manager's details and any approval limit on the first call prevents the most frustrating kind of return trip: the technician on site, the problem found and nobody able to say yes. See handling tenant calls for the full process.

Photos before the visit

A photo of the water heater label tells the technician the model, size and fuel. A photo of the leak shows whether it is a supply line or a drain. A photo of the access route shows whether a ladder or crawl-space gear is needed. With 91% of US adults owning a smartphone[5], most customers can send one in a minute.

Ask during the call and send the link before you hang up, so the customer can do it straight away. More on this in getting customers to send photos before the visit.

Minimum intake versus full intake

Not every call needs every field. Use a short version for emergencies and a full version for routine bookings.

  1. Emergency minimum: address, mobile number, the problem, whether the water is off, safety concerns and who will be there. Get the technician moving, then fill in the rest by text.
  2. Routine full intake: every group in the checklist.
  3. Repeat customer: confirm what is on file and ask what has changed.
  4. Commercial or property-manager call: add the work order, site contact and approval limit.

Make the checklist stick

  1. Build it into your software

    Turn the checklist into required or prompted fields in your field-service software, in the order CSRs ask them.

  2. Use dropdowns where you can

    Property type, own or rent, fuel type and water heater type are faster and cleaner as choices.

  3. Keep a free-text field

    Always capture the caller's own description of the problem.

  4. Print a pocket version

    For overflow answerers and on-call phones that do not have the software open.

  5. Check completeness weekly

    Pick a handful of jobs and score the intake. Coach the missing fields.

  6. Track return trips

    Tag every second visit with a reason. If "missing information" appears often, find which field.

Hand the intake to the technician

Good intake is wasted if the technician never reads it. Send it in the same short format on every job, at the top of the work order or in the dispatch text: the problem in the caller's words, the address and access notes, own or rent with the approval path, equipment details, photos and any safety flags. Put the safety flags first.

Ask technicians to call out missing information. A quick note back to the office, such as "no gate code on this one", is the fastest feedback loop you have, and it shows CSRs which questions matter on the ground. If an SI Employee such as Ava answers some of your calls, load the same checklist into it, so every job summary reaches the technician in the same format whoever took the call.

Intake after hours

At night the person answering is often the on-call technician, a family member or an outside service, and nobody has the field-service software open. Give them a one-page version of the emergency minimum: address and ZIP code, mobile number read back, the problem, whether the water is off, safety concerns, who will be there and own or rent. Ask them to text it to the office number or enter it in the morning so it becomes a proper job record.

The next morning, the office completes the rest of the intake by text or a short call before any follow-up visit. That keeps night calls quick without losing the details that prevent a second trip.

Example: one field, one saved trip

Example: the fictional Lakeview Plumbing booked a water heater replacement estimate with only an address and a phone number. The technician arrived with a 50-gallon gas tank on the truck. The house had a tankless unit, and the tenant who answered the door could not approve anything.

After adding equipment type, a label photo and the own-or-rent question to the intake, Lakeview's next comparable job went differently. Example: the CSR captured that the caller was a tenant, got the landlord's approval limit and received a label photo by text. The technician arrived with the right parts and approval in place, and the job was finished on the first visit.

Common intake mistakes

  • Typing the phone number without reading it back.
  • Asking for the address before understanding the problem, which makes the caller feel processed.
  • Skipping the own-or-rent question because the caller "sounds like the owner".
  • Writing "leak" with no location, fixture or severity.
  • Forgetting the gate code or parking notes for apartments and gated communities.
  • Leaving out the year the home was built for repipe, sewer and water heater jobs.

Frequently asked questions

What information should a plumber get when booking a job?

Contact details read back, the address and access notes, a clear description of the problem, equipment type and age, whether the caller owns or rents and who approves the work, photos if possible, the time window and any safety concerns.

How do we avoid second trips?

Most return trips come from missing intake information: the wrong part, no access, nobody home or no one able to approve. Make the key fields required in your software and request photos before the visit.

Should CSRs ask every caller whether they own the home?

Yes. Many callers are tenants who cannot approve repairs. Asking on the first call lets you get the owner's or manager's approval before the technician arrives.

Is a shorter intake OK for emergencies?

Yes. Get the address, number, problem, water status, safety concerns and who will be there, dispatch, then collect the rest by text.

References

  1. U.S. Census Bureau (2026). Quarterly Residential Vacancies and Homeownership, Third Quarter 2026 (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  4. U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) โ†‘

  5. Pew Research Center (2026). Mobile Fact Sheet (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo