Dispatch scheduling

Managing property manager plumbing work orders

Property manager work orders done right: intake fields, not-to-exceed approvals, tenant contact rules, vacant-unit access and a completion package.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why property manager work is different
  2. Set up each management account once
  3. Intake fields for every work order
  4. Not-to-exceed approvals
  5. Tenant contact rules
  6. Reaching tenants who do not pick up
  7. Vacant units and turnovers
  8. Emergencies at managed properties
  9. The completion package
  10. Example: one work order, start to finish
  11. Keep the account healthy
  12. Frequently asked questions
  13. References
Dispatch scheduling: Managing property manager plumbing work ordersArticle coverDISPATCH SCHEDULINGManaging propertymanager plumbing workordersAva for PlumbersInsightsDispatch scheduling: Managing property manager plumbing work ordersArticle coverDISPATCH SCHEDULINGManaging propertymanager plumbing workordersAva for Plumbers

Key takeaways

  • Every property manager job has three parties: the manager who approves, the tenant who opens the door and the owner who pays.
  • Capture the work order number, not-to-exceed amount and on-site contact before anything is scheduled.
  • Text tenants from your business number and say who you are working for; only 19% of US adults generally answer unknown calls[1].
  • Vacant units need lockbox or key arrangements confirmed in advance; the rental vacancy rate was 7.6% in Q3 2026[2].

Why property manager work is different

A homeowner who calls about a leak approves the work, opens the door and pays the bill. On a managed rental, those are three different people. The property manager approves and sets limits, the tenant provides access and the owner ultimately pays, often through the manager. Miss any of the three and the job stalls: a tech at the door with nobody home, a repair done above the approved amount, or an invoice rejected because it lacks a work order number.

The rental market is large enough to make this worth getting right. The US homeownership rate was 65.5% in the third quarter of 2026[2], so roughly a third of occupied homes are rented, many of them through managers who send steady, repeat work to plumbers they trust.

Set up each management account once

Most friction with property managers comes from details nobody wrote down at the start. When a new management company sends its first job, spend fifteen minutes with them setting up the account, and record the answers where every CSR and dispatcher can see them.

  • Who can authorize work, and up to what standing not-to-exceed amount.
  • How work orders arrive (portal, email, phone) and how invoices must be submitted.
  • Photo and documentation requirements for every job.
  • Their definition of an emergency, and whether emergency entry is pre-authorized.
  • After-hours contact for approvals, and what to do if nobody answers.
  • Preferred arrival windows, quiet hours and building rules for each property.
  • Payment terms, and who to call when an invoice is late.

Review the account notes once a year or whenever the manager's staff changes. A new assistant property manager who does not know the standing NTE can stall every job for a month.

Intake fields for every work order

Example: required fields for property manager work orders
FieldWhy it matters
Management company and requesterWho approved the job and who to call with questions
Work order or PO numberMost managers will not pay an invoice without it
Property address and unitMulti-unit buildings need the exact unit
Tenant name and mobile, or vacantWho opens the door; vacant units need key details
Access methodTenant present, lockbox code, key pickup, building manager
Not-to-exceed (NTE) amountThe most you can spend without further approval
Problem description and prioritySets the tier and the truck
Entry notice givenWhether the manager has notified the tenant of entry
Billing instructionsBill the manager, the owner or a portal; photo requirements

Make these required fields in your system for every account flagged as property management. A CSR should not be able to save the job without them.

Not-to-exceed approvals

The NTE is the manager's spending limit for the work order. Treat it as a hard ceiling.

  1. Confirm the NTE at intake

    If the manager did not set one, ask. Some accounts have a standing NTE written into the service agreement.

  2. Diagnose before you exceed

    If the repair will exceed the NTE, the tech stops after diagnosis and makes the area safe.

  3. Request approval with evidence

    Send the manager photos, a short description and a written quote for the additional work.

  4. Wait for written approval

    An email or portal approval, recorded in the job. Verbal approval from a tenant does not count.

  5. Proceed or reschedule

    If approval comes quickly, continue. If not, close the visit as diagnosis only and book the return.

Explain the process to the tenant on site so they do not feel abandoned: 'I've found the problem. It's a bigger repair than your manager pre-approved, so I'm sending them photos now. I've stopped the leak, and we'll be back as soon as they approve.'

Tenant contact rules

  • Identify yourself as working for the management company: 'This is Lakeside Plumbing, calling on behalf of North Street Property Management about the repair request at your unit.'
  • Confirm the manager has given the tenant notice of entry, as their lease and local law require; do not arrange entry on your own authority.
  • Do not discuss price, approvals or the owner's decisions with the tenant. Refer those questions to the manager.
  • Agree arrival windows with the tenant, but tell the manager the time too.
  • Respect quiet hours and building rules. In multi-unit buildings, confirm whether the water shut-off affects other units and who notifies them.
  • Offer the tenant's preferred language if you can.

Reaching tenants who do not pick up

Tenants screen calls from numbers they do not know, like everyone else. Pew found only 19% of US adults generally answer calls from unknown numbers[1]. Lead with a text from your business number, naming the management company so the tenant knows the message is legitimate, then call. If you cannot reach the tenant after two attempts, tell the manager before the scheduled day, not when the tech is standing at a locked door.

If you record calls, know the rules. Federal law allows recording when one party consents, but some states require all parties' consent[3]. Tell everyone the call may be recorded, and check the rules for each state you work in.

Vacant units and turnovers

Vacant units remove the tenant from the picture but add access problems. The rental vacancy rate was 7.6% in the third quarter of 2026, against 1.2% for homeowner housing[2], so turnover work is a regular part of managed-property plumbing.

US vacancy rates, third quarter 2026Census Housing Vacancy Survey.
US vacancy rates, third quarter 2026Comparison. Rental: 7.6%; Homeowner: 1.2%.7.6%RentalRental: 7.6%1.2%HomeownerHomeowner: 1.2%US vacancy rates, third quarter 2026Comparison. Rental: 7.6%; Homeowner: 1.2%.7.6%RentalRental: 7.6%1.2%HomeownerHomeowner: 1.2%

Source: U.S. Census Bureau, 2026[2]

Show the data
Housing typeVacancy rate (%)
Rental7.6%
Homeowner1.2%
  • Record the lockbox code or key pickup location in the job, and confirm it the day before.
  • Photograph the unit's condition on arrival, especially existing damage.
  • Batch turnover jobs at the same property where possible: several units in one visit save drive and setup time.
  • Leave the unit locked and secured exactly as found, and confirm in writing.

Emergencies at managed properties

Agree on what counts as an emergency with each management company, and put it in the account notes. Most will want burst pipes, water coming through ceilings, sewage backups and no water treated as emergencies with entry authorized immediately. Water damage is expensive: the Insurance Information Institute reports 1.50 water damage and freezing claims per 100 insured homes a year and an average claim of $15,400[4].

After-hours calls often come straight from tenants, who may not know the work order process. Whoever answers your line at night needs the account list: which properties belong to which manager, the manager's emergency rules and their after-hours contact. If your after-hours calls are answered by an SI Employee such as Ava, give it the same account notes so urgent tenant calls reach the on-call tech and routine requests wait for the manager's approval.

The completion package

Managers approve invoices faster when everything they need arrives in one place. Send it the same day.

  • Invoice with the work order number, property address and unit.
  • Before and after photos, plus photos of any damage found.
  • A short description of the cause and the repair, in plain language the owner can understand.
  • Any recommended follow-up work, quoted separately.
  • Time on site, and a note of any access problems.

Example: one work order, start to finish

Example (fictional): a management company emails a work order for a slow kitchen drain in Unit 3B, NTE in the account's standard amount, tenant at home after 4 p.m. The CSR enters the fields, texts the tenant on behalf of the manager and books a 4 to 6 p.m. window. The tech clears the drain, finds a corroded trap arm, replaces it within the NTE and photographs both. The invoice and photos reach the manager's portal that evening, and the manager approves payment the next morning.

Example, continued: a week later the same building reports water through a ceiling at 11 p.m. The tenant calls directly. The after-hours line checks the account notes, sees the manager has authorized emergency entry, dispatches the on-call tech and emails the manager a summary. The manager wakes up to a fixed leak and a complete record.

Keep the account healthy

Review each management account quarterly: response time, jobs above NTE, invoices rejected and why, and tenant complaints. Ask the manager what would make their life easier. Small fixes, such as adding a field they need on invoices, keep the account loyal. For scheduling this work alongside regular service, see dispatch software features plumbers actually use, and for commercial accounts with after-hours terms, see after-hours commercial accounts.

Frequently asked questions

What is a not-to-exceed amount on a plumbing work order?

The maximum the property manager has approved for the job. If the repair will cost more, the tech stops after diagnosis, makes the area safe and asks the manager for written approval.

Can a tenant approve extra plumbing work?

No. Approval comes from the property manager or owner, in writing. Tenants arrange access but should not be asked to approve scope or price.

How should a plumber contact tenants?

Text from the business number, naming the management company, then call. Confirm the manager has given notice of entry, and do not discuss prices or approvals with the tenant.

What should go in the completion package?

An invoice with the work order number and unit, before and after photos, a plain-language description of the cause and repair, any recommended follow-up and notes on access problems.

References

  1. Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) โ†‘

  2. U.S. Census Bureau (2026). Quarterly Residential Vacancies and Homeownership, Third Quarter 2026 (opens in a new tab) โ†‘

  3. Legal Information Institute, Cornell Law School (U.S. Code) (2026). 18 U.S. Code ยง 2511 - Interception and disclosure of wire, oral, or electronic communications prohibited (opens in a new tab) โ†‘

  4. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo