Pricing estimates

Estimating a whole-house repipe

How to estimate a whole-house repipe: walk-through checklist, fixture counts, materials, wall repair, permits, lead service lines and living in place.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why repipes are estimated differently
  2. The walk-through checklist
  3. Fixture counts and the route
  4. Material choice
  5. Lead and galvanized service lines
  6. Wall access and repair
  7. Permits, inspection and code upgrades
  8. Living in place during the repipe
  9. Common repipe estimating mistakes
  10. Allowances and the final number
  11. Frequently asked questions
  12. References
Pricing estimates: Estimating a whole-house repipeArticle coverPRICING ESTIMATESEstimating awhole-house repipeAva for PlumbersInsightsPricing estimates: Estimating a whole-house repipeArticle coverPRICING ESTIMATESEstimating awhole-house repipeAva for Plumbers

Key takeaways

  • Estimate a repipe from a fixture count and a route plan, not from square footage alone.
  • Price wall access and repair as their own lines, and state exactly what finish level is included.
  • Older homes need extra checks: EPA says lead pipes are more likely in homes built before 1986[1], and an estimated four million lead service lines remain in the US[2].
  • Most repipes happen in occupied homes; the homeowner vacancy rate was just 1.2% in the third quarter of 2026[3], so plan water-off windows and daily restoration.
  • List code upgrades, allowances for hidden damage and the inspection schedule up front.

Why repipes are estimated differently

A whole-house repipe replaces the water supply piping throughout a home. It is usually triggered by repeated pinhole leaks in copper, corroded galvanized pipe, polybutylene, or a leak that caused real damage. The average homeowners insurance claim for water damage and freezing was $15,400 over 2019 to 2023[4], which is often the comparison customers make when deciding whether to stop patching.

Repipes are multi-day projects in someone’s home, with walls opened, water off for parts of each day and an inspection before anything is closed. The estimate has to cover all of that clearly. Square-foot pricing misses the things that drive cost most: the number of fixtures, the route the pipe can take, how many walls must be opened and who repairs them.

The walk-through checklist

  1. Age of the home and current pipe material at several points: main entry, water heater, under sinks, in the crawl space or basement.
  2. Foundation and access: slab, crawl space, basement, attic. This decides the route and how much wall and ceiling access is needed.
  3. Number of floors and where wet walls stack.
  4. Fixture locations, counted room by room.
  5. Water heater type and location, and whether it stays or is part of the project.
  6. Main shutoff condition, pressure at a hose bib and whether a PRV is present.
  7. The service line material where it enters the house.
  8. Finishes that affect access: tile, plaster, built-in cabinets, finished basement ceilings.
  9. Who lives in the house: children, older relatives, people working from home, pets.
  10. Anything the homeowner wants to change at the same time, such as moving a laundry or adding a fixture.

Photograph every fixture location and access point. The photos drive the route plan and help the office answer questions later.

Fixture counts and the route

Count every point that needs water, hot and cold, then plan how the new pipe reaches them. Most shops price a repipe as a base for the mains and distribution plus a price per fixture connection, adjusted for access difficulty.

Example fixture count for a fictional two-bathroom home
Fixture point (Example home)CountNotes
Kitchen sink1Hot and cold, new stop valves
Dishwasher1From kitchen hot
Refrigerator ice maker1Cold, new valve box
Bathroom lavatories3Two bathrooms share a wet wall
Toilets2New stops and supply lines
Tub and shower valves2Access through closet behind one valve
Laundry box1New box with hammer arrestors
Water heater connections1Garage, existing tank stays
Hose bibs2Front and back, frost-free replacements optional

Sketch the route on a floor plan: where the main enters, where manifolds or trunk lines run, and which walls and ceilings must be opened. The sketch becomes the access plan and lets the customer see why each opening is needed.

Material choice

Most residential repipes today use PEX or copper, with CPVC in some markets. Present the materials that suit the house and local code, with honest trade-offs: cost, installation time, number of wall openings, noise, freeze tolerance and the homeowner’s preferences. Copper material prices have been volatile since 2025, partly because of tariffs, so check current supplier costs and keep the quote’s validity short for copper options; see how tariffs affect plumbing material costs.

Whatever you install must meet drinking water lead-free requirements. Under the Safe Drinking Water Act, lead free means a weighted average of no more than 0.25% lead across wetted surfaces of pipes, fittings and fixtures, and no more than 0.2% in solder and flux[5]. Buying from reputable suppliers and keeping product records makes that easy to show.

Lead and galvanized service lines

A repipe stops at the house, but the service line that feeds it matters too. EPA notes that lead pipes are more likely in older cities and homes built before 1986[1], and its latest infrastructure needs survey estimates a total of four million lead service lines nationwide[2]. Under EPA’s Lead and Copper Rule Improvements, issued in October 2024, drinking water systems must identify and replace lead pipes within ten years[6].

  • If the service line looks like lead or galvanized steel, record it with photos and tell the customer what you saw.
  • Suggest the customer contact their water utility to ask about its service line inventory and any replacement program.
  • Price service line replacement as a separate option, or note that it is excluded, so expectations are clear.
  • Do not connect new interior piping to a line you believe is lead without telling the customer in writing.

Wall access and repair

Wall repair is where repipe estimates most often go wrong. Customers imagine walls returned to exactly how they were; many plumbers mean rough patching only. Decide what you include and write it down.

  1. Count the openings

    From the route plan, list each opening by room and approximate size.

  2. Choose the finish level

    Options include: openings left for the customer’s contractor, rough patch only, patch and texture, or patch, texture and paint.

  3. Price it separately

    Show drywall repair as its own line, whether you do it or a partner does, so the customer can compare.

  4. Protect the home

    Include floor protection, dust control and daily clean-up in the scope.

  5. Note exclusions

    Tile, plaster, wallpaper and custom finishes are usually excluded or quoted separately.

Permits, inspection and code upgrades

Most jurisdictions require a permit and a rough-in inspection before walls are closed. Build inspection timing into the schedule; a wait for the inspector can hold the wall repair for a day or more. List any code-required items that come with the work, such as new shutoffs, a PRV where pressure is high, hammer arrestors or an expansion tank, in every option rather than as upsells.

Living in place during the repipe

Most repipes happen in occupied homes. In the third quarter of 2026 the homeowner vacancy rate was 1.2% and the rental vacancy rate 7.6%[3]. For owner-occupied homes, assume the family is living there and plan the work around them. For rentals, a vacancy between tenants is the easiest window; otherwise the tenant needs the same plan.

US vacancy rates, third quarter of 2026
US vacancy rates, third quarter of 2026Comparison. Rental vacancy rate: 7.6%; Homeowner vacancy rate: 1.2%.7.6%Rental vacancy rateRental vacancy rate: 7.6%1.2%Homeowner vacancy rateHomeowner vacancy rate: 1.2%US vacancy rates, third quarter of 2026Comparison. Rental vacancy rate: 7.6%; Homeowner vacancy rate: 1.2%.7.6%Rental vacancy rateRental vacancy rate: 7.6%1.2%Homeowner vacancy rateHomeowner vacancy rate: 1.2%

Source: U.S. Census Bureau, 2026[3]

Show the data
ItemValue
Rental vacancy rate7.6%
Homeowner vacancy rate1.2%
  • Set daily water-off windows and restore water every evening.
  • Keep at least one bathroom usable each night wherever possible.
  • Agree which rooms are off-limits each day and where the crew will stage materials.
  • Plan around people working from home, children’s schedules and pets.
  • Send the day-by-day plan in writing before the start date, and update it daily during the job.

Scheduling detail for multi-day work is covered in multi-day job scheduling for repipes, and daily customer messages in keeping customers updated during long jobs.

Common repipe estimating mistakes

  1. Pricing from square footage without a fixture count, so homes with many bathrooms are underpriced.
  2. Leaving wall repair vague, then arguing about the finish at the end of the job.
  3. Forgetting the inspection wait, so the schedule and the customer’s plans slip.
  4. Missing access problems such as tile walls, finished ceilings or built-ins until the work starts.
  5. No allowance for damage hidden behind walls, which turns every discovery into a dispute.
  6. Holding a copper price too long while material costs are moving.

Each of these can be caught at the walk-through with the checklist above and a few extra photos. Ten more minutes on site saves hours of rework and difficult conversations later.

Allowances and the final number

Example (fictional): a two-bathroom, single-story home on a crawl space with 14 fixture points. Lines: mains and distribution in PEX through the crawl space; 14 fixture connections with new stops; 9 wall openings; patch and texture, paint excluded; permit and inspection; code upgrades: new main shutoff and hammer arrestors; water heater connections. Allowances: hidden damage behind walls at a unit price per opening; additional openings beyond nine at a set price each. Schedule: three working days plus inspection, water restored nightly. Copper alternative shown with a shorter price hold.

Present the estimate with the route sketch, the photos and the day-by-day plan. Large repipe quotes often take time to approve, so follow up on a schedule; see following up on unsold estimates. If the water heater is old, show its replacement as a separate option; see water heater replacement pricing.

Frequently asked questions

How do plumbers estimate a whole-house repipe?

By counting fixture points, planning the pipe route through the home, choosing the material, counting wall openings, and adding permits, inspection, code upgrades, wall repair and allowances for hidden damage.

Can we live in the house during a repipe?

Usually, yes. Good plans set daily water-off windows, restore water every evening and keep at least one bathroom usable overnight wherever possible.

Does a repipe include drywall repair?

It depends on the contractor. Ask exactly what finish level is included, from openings left for another contractor to patch, texture and paint, and get it in writing.

References

  1. U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) ↑

  2. U.S. Environmental Protection Agency (2025). EPA's 7th Drinking Water Infrastructure Needs Survey and Assessment (opens in a new tab) ↑

  3. U.S. Census Bureau (2026). Quarterly Residential Vacancies and Homeownership, Third Quarter 2026 (opens in a new tab) ↑

  4. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑

  5. U.S. Environmental Protection Agency (2026). Use of Lead Free Pipes, Fittings, Fixtures, Solder and Flux for Drinking Water (opens in a new tab) ↑

  6. U.S. Environmental Protection Agency (2024). Lead and Copper Rule Improvements (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo