Key takeaways
- Most plumbers learn the trade through a 4- or 5-year apprenticeship with about 2,000 hours of paid on-the-job training a year plus technical instruction[1][2].
- A registered program is approved by the Department of Labor or a State Apprenticeship Agency and includes a paid job with progressive wages, structured training, classroom learning and a credential[3].
- The Labor Department reports that 90% of apprentices continue employment after completing an apprenticeship[3].
- Start small: one or two apprentices, a named mentor each and a written wage schedule tied to milestones.
Why register instead of training informally
Many plumbing shops already train helpers on the job. A registered apprenticeship turns that informal training into a structured program with written standards, tracked hours, classroom instruction and a nationally recognized credential at the end. Programs are approved and validated by the U.S. Department of Labor or a State Apprenticeship Agency[3].
Registration helps in three ways. It gives recruits a clear career path and a credential, which makes the job easier to sell. It makes hours count: in many states, documented apprenticeship hours feed directly into eligibility for the journeyman exam. And it tends to keep people; the Labor Department reports that 90% of apprentices continue employment after completing an apprenticeship[3].
The pipeline problem it solves
The Current Population Survey counted 624,000 employed plumbers, pipefitters and steamfitters in 2025, of whom 85,000 were under 25[4] and about 115,000 were 55 or older[5]. Over the next decade, many of those older workers, including master plumbers and senior techs, will retire. Shops that rely only on hiring experienced plumbers are competing for a limited pool; shops that train their own have a steady supply.
- Under 25 85 thousand 14%
- 25-54 424 thousand 68%
- 55 and older 115 thousand 18%
Source: U.S. Bureau of Labor Statistics, 2025[4]
Show the data
| Item | Value |
|---|---|
| Under 25 | 85 thousand |
| 25-54 | 424 thousand |
| 55 and older | 115 thousand |
The entry point is accessible. The typical entry-level education for plumbers is a high school diploma or equivalent, with training through apprenticeship[6]. That opens recruiting to high school graduates, career changers and veterans who have never worked in the trade.
The building blocks of a registered program
| Component | What it means at a plumbing shop | Decision you make |
|---|---|---|
| Industry-led standards | The program follows recognized plumbing occupation standards | Use a national or state guideline framework, or join a group program |
| Paid job with progressive wages | Apprentices earn from day one and get raises as skills grow | Your wage schedule and its milestones |
| Structured on-the-job learning | A list of work processes with hours, signed off by a mentor | Which tasks, in what order, and who signs |
| Supplemental classroom education | Related technical instruction each year | College, trade association, union program or online provider |
| Credential | A nationally recognized certificate at completion | How completion links to your state’s license exam |
These five components follow the Labor Department’s description of a registered program[3]. Your state agency or apprenticeship consultant will tell you the exact paperwork and minimums that apply in your state.
Registering, step by step
Choose how to sponsor
You can sponsor your own program or join a group program run by a trade association, college or union. Small shops often join a group program because it handles paperwork and classroom instruction.
Contact the right agency
Find out whether your state has a State Apprenticeship Agency or works with the Labor Department’s Office of Apprenticeship. Apprenticeship.gov lets you express interest and be connected with a consultant[3].
Write your standards
Define the term of the apprenticeship, the on-the-job work processes, the related instruction, the wage schedule, how many apprentices each journeyworker supervises and how you select apprentices.
Line up instruction
Agree with a college, association or online provider to deliver the classroom portion, and decide who pays for tuition and books.
Sign agreements and register apprentices
Each apprentice signs an apprenticeship agreement, which is registered with the agency.
Track hours and progress
Log on-the-job hours by work process and classroom hours, and have mentors sign off skills as they are demonstrated.
Hours and instruction
BLS says plumbing apprentices typically receive 2,000 hours of paid on-the-job training each year, plus technical instruction, and that most plumbers learn the trade through a 4- or 5-year apprenticeship[2][1]. Your standards will set the exact term. For licensing, states and localities often require 2 to 5 years of experience and passing an exam[7], so design your program to meet your state’s journeyman requirements.
- Community colleges and technical schools: structured courses, often evening classes, sometimes with state funding.
- Trade association programs: plumbing-specific curricula built with contractors.
- Union joint apprenticeship programs: established training centers in many metros.
- Approved online providers: flexible for apprentices who work long or irregular hours.
Building a progressive wage schedule
A progressive wage schedule ties pay increases to time and skill. Many programs express each step as a percentage of the journeyworker wage. Anchor the journeyworker rate to local wage data; nationally, the median hourly wage for plumbers, pipefitters and steamfitters was $30.67 in 2025[8].
| Step | Milestone | Share of journeyworker rate (example) |
|---|---|---|
| Start | Probation complete | 50% |
| Year 1 | 2,000 hours and first-year instruction | 55% |
| Year 2 | Second-year skills signed off | 65% |
| Year 3 | Third-year skills signed off | 75% |
| Year 4 | Fourth-year skills signed off | 85% |
| Completion | Credential and license exam eligibility | Journeyworker rate |
Tie each raise to signed-off skills as well as hours, so apprentices see exactly what to work on next. Pay raises promptly when milestones are met; a delayed step increase is one of the quickest ways to lose an apprentice to a competitor.
Costs, and the support to ask about
An apprenticeship has real costs: wages during the months when an apprentice produces little billable work, mentor time, tuition and books, tools and safety gear, and the admin of tracking hours. Budget for them honestly, and treat the program as an investment that pays back once apprentices run calls on their own.
Ask your state apprenticeship agency and local workforce board what support exists before you start. Depending on the state and the year, there may be tuition assistance, wage reimbursement for new apprentices, grants for group programs or tax credits. Availability changes often, so get current details in writing rather than relying on what another contractor received a few years ago.
Mentors make or break it
The most important decision is who trains the apprentice day to day. Pick journeyworkers who explain patiently, model safe habits and treat customers well, not just the fastest techs. Give mentors time to teach, recognition and, ideally, a stipend. Agree how many apprentices each mentor supervises and keep that number manageable. Ask mentors to sign off skills on a schedule, and review progress together monthly.
Prepare mentors before the apprentice arrives. A short session on how to explain a task, when to let the apprentice try and how to give feedback without discouraging them makes a large difference. Mentors should also know the program paperwork: which work processes to sign off, how to log hours and who to tell when an apprentice is falling behind in class. Rotating apprentices between two mentors over the term broadens what they learn and stops one person carrying all the training load.
Recruiting and onboarding your first apprentices
- Recruit where beginners are: high school career and technical programs, community college pre-apprenticeship courses, veterans’ transition offices and your own customers’ families.
- Screen for reliability, curiosity and comfort with physical work rather than prior plumbing experience.
- Offer a paid ride-along day before hiring so candidates see the real job.
- Explain the wage schedule, classroom commitment and license path in writing before the offer.
- Week one: safety training, tools, the truck and the basics of how calls are run.
- First month: ride-alongs on every common job type, with the mentor explaining each step.
- Months two and three: supervised hands-on work on simple tasks, logged by work process.
- Day 90: probation review with the mentor and owner, the first skills sign-off and confirmation of classroom enrollment.
Track a few numbers for the program as a whole: how many apprentices start, how many are still with you after one year, how many complete and how many pass the journeyman exam on the first try. Those four figures tell you whether the program is working and where to improve it.
Common pitfalls
- Using apprentices as low-cost helpers who never move beyond carrying parts.
- Missing classroom deadlines because no one tracks enrollment.
- Poor hour records, which can delay license eligibility.
- Raises that lag behind the wage schedule.
- Taking on more apprentices than mentors can properly supervise.
Example: a two-apprentice start
Example (fictional): A seven-tech residential shop joins a group program run by its state trade association. It hires two apprentices, a recent high school graduate and a veteran, and assigns each to a senior journeyman mentor. The association handles registration and evening classes; the shop pays tuition and books. The wage schedule starts at half the journeyman rate with raises at each signed-off year. After the first year, both apprentices are running simple drain and fixture calls with their mentors on call, and the shop plans to add one apprentice every year.
Related reading: apprentice to journeyman: designing the path, pay transparency laws for job posts, writing a plumber job ad and recruiting from trade schools and high schools.
Frequently asked questions
How long is a plumbing apprenticeship?
Most plumbers learn the trade through a 4- or 5-year apprenticeship[1]. Your registered program standards set the exact term.
How do I register an apprenticeship program?
Contact your State Apprenticeship Agency or the Labor Department’s Office of Apprenticeship, or express interest on Apprenticeship.gov to be connected with a consultant[3]. Small shops often join a group program.
Do apprentices get paid?
Yes. A registered apprenticeship is a paid job with wages that rise as skills and productivity increase[3].
Who provides the classroom training?
Usually a community college, trade association, union training center or approved online provider, arranged by the sponsor.
References
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Department of Labor, Apprenticeship.gov (2026). Registered Apprenticeship Program (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 11b: Employed persons by detailed occupation and age, 2025 (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 11b: Employed persons by detailed occupation and age, 2025 (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑