Dispatch scheduling

Scheduling ride-alongs for apprentices

How to schedule apprentice ride-alongs in a plumbing shop: which jobs to pair, what pairing costs, a weekly calendar and a skills log for sign-offs.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why ride-alongs need a schedule
  2. When to pair and when to send solo
  3. What pairing costs and how to think about it
  4. Building the weekly ride-along calendar
  5. What the apprentice does on each visit
  6. Common scheduling mistakes
  7. Ride-alongs and the customer
  8. Tracking progress and sign-offs
  9. Using quiet days well
  10. Frequently asked questions
  11. References
Dispatch scheduling: Scheduling ride-alongs for apprenticesArticle coverDISPATCH SCHEDULINGScheduling ride-alongsfor apprenticesAva for PlumbersInsightsDispatch scheduling: Scheduling ride-alongs for apprenticesArticle coverDISPATCH SCHEDULINGSchedulingride-alongs forapprenticesAva for Plumbers

Key takeaways

  • Apprentices typically get about 2,000 hours of paid on-the-job training a year[1]; a ride-along calendar decides whether those hours teach anything.
  • Pair on jobs where a second person speeds the work or teaches a core skill; send solo on short, routine calls.
  • Price the pairing honestly: hourly wages for plumbers run from $21.22 at the 10th percentile to $52.13 at the 90th[2].
  • Build the week around a skills matrix, not around whoever is free that morning.
  • Log every ride-along against a skill list so sign-offs are based on reps, not time served.

Why ride-alongs need a schedule

Most plumbers learn the trade through a 4- or 5-year apprenticeship, and apprentices typically receive 2,000 hours of paid on-the-job training each year alongside technical instruction[1]. In a busy service shop those hours often happen by accident: the apprentice rides with whoever has room in the truck, does the same drain jobs for months and never sees a gas line or a tankless install.

The workforce makes this more urgent. Of the 624,000 employed plumbers, pipefitters and steamfitters counted in 2025, about 85,000 were under 25 and about 115,000 were 55 or older[3]. The senior techs who carry the know-how will not all be around in ten years, and construction job openings stood at 298,000 in September 2026, a 3.4% rate[4]. Training time is one of the few levers a shop controls.

Employed plumbers, pipefitters and steamfitters by age, 202525 to 54 calculated as the remainder of the 624,000 total
Employed plumbers, pipefitters and steamfitters by age, 2025Donut chart. Under 25: 85 thousand workers; 25 to 54: 424 thousand workers; 55 and older: 115 thousand workers.Under 25: 85 thousand workers25 to 54: 424 thousand workers55 and older: 115 thousand workers624k employed
  • Under 25 85 thousand workers 14%
  • 25 to 54 424 thousand workers 68%
  • 55 and older 115 thousand workers 18%

Source: U.S. Bureau of Labor Statistics, 2025[3]

Show the data
ItemValue
Under 2585 thousand workers
25 to 54424 thousand workers
55 and older115 thousand workers

When to pair and when to send solo

Not every job is worth a second person. Use the job type and the learning value together to decide.

A simple pairing guide by job type
Job typePair?Why
Water heater replacementYesTwo people for carrying and set-up; core skill for every tech
Sewer camera and locateYes, early in trainingReading footage and locating takes repetition
Excavation or sewer repairYesSafety and spotting require a second person
Repipe or multi-day workYesLong jobs give room to teach without slowing the customer
Routine drain clearingOnly until signed offLearn once or twice, then solo
Faucet or toilet repairRarelyShort tickets where a second person adds cost, not speed
Emergency after-hours callsCase by caseGood learning, but only with an on-call policy that covers apprentice hours

A good rule: pair when the apprentice will either do a meaningful part of the work or see a skill they have not seen in the last month. If they will only watch a familiar job, send them somewhere else.

What pairing costs and how to think about it

The direct cost is the apprentice’s paid time on a job that might not need them. Wages vary a lot by market and experience: O*NET reports plumber hourly wages from $21.22 at the lowest 10% to $52.13 at the highest 10%, with a median of $30.67[2]. Across all employees at plumbing, heating and AC contractors, average hourly earnings reached $42.38 in September 2026[5].

Example (fictional): an apprentice paid $22 an hour joins a senior tech on a four-hour water heater swap. The direct cost is about four apprentice hours. If the apprentice carries, preps, cleans up and handles the haul-away, the job may finish 45 minutes sooner, freeing the senior tech for another call. The real net cost of that ride-along may be close to zero, while a ride-along on a 40-minute faucet repair costs nearly the full apprentice time with little return.

That is the decision rule in practice: pair where the apprentice adds speed or safety, or where the lesson is worth the cost. Do not hide training cost in customer prices on small tickets; if a job truly needs two people, quote it that way and explain why.

Building the weekly ride-along calendar

  1. List the skills

    Write 20 to 40 skills the shop expects every service tech to have: shutoffs and isolation, drain clearing, toilet rebuilds, valve replacement, water heater tank and tankless, PRVs, gas leak checks, camera work, estimating and option presentation.

  2. Score each apprentice

    For every skill, mark: not seen, seen, done with help, done alone. This is the skills matrix. Update it weekly.

  3. Tag the board

    When jobs are booked, tag the ones that teach a skill: install, tankless, sewer camera, repipe. Dispatch can then match tags to gaps in the matrix.

  4. Block pairing days

    Reserve two or three paired days a week per apprentice in advance, with a named senior tech. Fill those days with tagged jobs first.

  5. Rotate the senior techs

    Apprentices learn different habits from different people. Rotate at least monthly, and pair the strongest teachers with the newest apprentices.

  6. Protect emergency capacity

    On peak days, the apprentice may be needed as a solo helper or the senior tech as a solo responder. Decide in advance which takes priority so pairing does not break the board.

What the apprentice does on each visit

Ride-alongs teach more when the apprentice has a job on every visit, not just a seat in the truck. Give them a fixed routine:

  1. Before arrival: read the job notes and photos, and say what tools and parts they expect to need.
  2. At the door: introduce themselves by name and role. Customers are generally fine with an apprentice when they know why they are there.
  3. During diagnosis: call out the shutoff locations and what they would check first, before the senior tech explains.
  4. During the work: do the steps marked “done with help” on their matrix, with the senior tech checking.
  5. At the end: write the job notes and take the photos, then let the senior tech correct them.
  6. Back in the truck: one question each way. What did you not understand? What would you do differently?

Those notes are useful for the next visit too. The standard in job notes that help the next visit gives apprentices a clear template to practice on.

Common scheduling mistakes

  • Pairing by convenience. The apprentice rides with whoever has a free seat, so the same three job types repeat for months.
  • Using apprentices as permanent helpers. Carrying and cleaning are part of the job, but an apprentice who never holds the tools is not being trained.
  • Breaking pairs on every busy day. If the pairing collapses whenever the phones ring, the calendar is only a wish list. Decide which days are protected.
  • No feedback loop. Ride-alongs without a log and a monthly review repeat the same gaps.
  • One teacher only. A single senior tech passes on good habits and bad ones alike; rotation gives a fuller picture of the trade.

Ride-alongs and the customer

Most customers accept a second person in the house when the office tells them in advance. Mention the apprentice in the confirmation text, use their name at the door and explain their role in a sentence: they are training with the lead tech, and the lead tech is responsible for the work.

Keep the teaching discreet. Detailed coaching happens in the truck, not in front of the customer, and the senior tech never corrects the apprentice in a way that undermines either of them. If a customer prefers only one person in the home, respect it and move the apprentice to the next tagged job.

Ride-alongs also build the communication skills customers notice. Have the apprentice explain the finished work to the customer on simple jobs, with the senior tech filling gaps. That practice pays off when they start running calls alone.

Tracking progress and sign-offs

Log each ride-along with the date, the senior tech, the job type and the skills practiced. A spreadsheet works; most field-service tools can do it with a custom field. Review the log monthly with the apprentice.

  • Sign off a skill only after the apprentice has done it alone, correctly, more than once, with a senior tech checking the result.
  • Compare logged hours with the apprenticeship program’s on-the-job requirements so the paperwork matches reality.
  • Flag any skill still at “not seen” after six months and tag upcoming jobs for it.
  • Share progress with the apprentice. Seeing the matrix fill in is one of the strongest reasons to stay.

Licensing also depends on documented experience; states and localities often require 2 to 5 years of experience plus an exam[1]. Accurate ride-along logs make that paperwork easy and protect both the apprentice and the shop. For the bigger program, see building a plumbing apprenticeship program.

Using quiet days well

When the board is light, ride-alongs can move to the shop: bench practice, mock-ups and a review of camera footage from recent jobs. Planning the next month of pairings is also a good quiet-day task. The slow-day playbook lists two-hour training blocks that fit around incoming calls.

Frequently asked questions

How many ride-along days should an apprentice get each week?

Many shops plan two or three paired days a week in the first year, then fewer as skills are signed off. The right number depends on how many tagged teaching jobs the board has and how many senior techs can teach well.

Should customers be charged for the apprentice's time?

Only when the job genuinely needs two people, such as heavy installs or excavation, and the quote says so. Training time on simple repairs is a shop cost, not a customer cost.

What if a senior tech does not want an apprentice in the truck?

Teaching is a skill. Pair the newest apprentices with techs who teach well, reward teaching in reviews and give reluctant techs shorter, specific assignments rather than full days.

References

  1. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  2. O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  3. U.S. Bureau of Labor Statistics (2025). Labor Force Statistics from the CPS, Table 11b: Employed persons by detailed occupation and age, 2025 (opens in a new tab) ↑

  4. U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Survey, Table 1: Job openings levels and rates by industry (opens in a new tab) ↑

  5. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo