Key takeaways
- A hold message has three jobs: say what is happening, offer a choice and keep the caller occupied. Unexplained, uncertain waits feel longer[2].
- Build a loop of short messages with the emergency route first. Leave promotions out.
- Offer a callback only if the office can keep it, and make it from the main number: 19% of adults generally answer unknown numbers[3].
- Radio or a personal playlist on hold is a copyright question[4][5]. Use music licensed for telephone hold, or none.
- Record Spanish versions where your area needs them: 39% of Spanish speakers at home spoke English less than “very well” in 2019[1].
What a caller on hold needs to hear
Plenty of plumbing offices still play the hold recording made the week the phone system went in: it thanks the caller for their patience four times a minute and advertises a water heater promotion that ended two summers ago. Callers notice. The person holding is rarely shopping. They have a problem in the house and they want a person.
David Maister's principles of waiting make a good brief for whoever writes the script: occupied time feels shorter than unoccupied time, uncertain waits feel longer than known ones, unexplained waits feel longer than explained ones, and anxiety makes every wait longer[2]. A message that says why the caller is waiting, what will happen next and what else they can do covers most of that. Everything else is decoration.
How long callers will hold, and how to measure your own abandon rate, is covered in how long callers will wait on hold for a plumber. This guide is about the words: what to record, in what order, and what to leave out.
Build a loop, not a speech
Most phone systems play a sequence of short audio files while a caller waits, with music in between. Treat each file as its own message of 10 to 20 seconds and design the order the way a caller will hear it, starting from the moment the line stops ringing.
| Slot | When it plays | Job of the message |
|---|---|---|
| 1 | Once, as the caller joins the queue | Who they reached, that a person will answer, and the route for emergencies |
| 2 | About 30 seconds in, then every loop | The choice: keep holding or take a callback |
| 3 | Every loop | Something useful: what to have ready when someone answers |
| 4 (optional) | Every other loop | Another way to get routine help, such as requesting a time online |
| Music bed | Between messages | Tells the caller the line is still open; kept low |
Two rules keep the loop honest. Never play the same message twice in a row; a caller who hears the same line twice in a minute has learned how long the wait is going to be. And keep the emergency route in slot 1, so every caller hears it before they decide to hang up. The greeting before the queue (phone greetings that work for plumbing companies) and your after-hours recording (voicemail greetings for plumbers) should use the same company name and the same emergency wording, so callers never hear two versions of the rules.
Scripts you can record
Each of these is written for one slot. Swap in your company name, read each one aloud against a stopwatch, and cut anything that runs past 20 seconds.
Example, slot 1: “You've reached Bramble Street Plumbing. Everyone in the office is on a call, and the next person free will pick up. If water is spreading in your home right now, press 1 to go straight to our emergency line.”
Example, slot 2: “If you'd rather not wait, press 2. We'll call you back from this number, Bramble Street Plumbing, in the order you called, and you won't lose your place.”
Example, slot 3: “To save time when we pick up, have the service address and ZIP code ready. If it's about a water heater, the brand and size are on the label on its side.”
Example, slot 4: “For routine work like a dripping faucet or a slow drain, you can also request a time on our website, and we'll confirm it with you today.”
Example, storm-day slot 1: “It's a busy morning after the freeze and we're answering as fast as we can. If a pipe has burst and you know where your main shut-off is, close it now, then press 1. If you can wait for a callback, press 2 and we'll keep your place.”
Notice what is missing: no promotions, no “did you know we also install water softeners,” no review requests. A caller hearing about a sale while water runs through the ceiling concludes the company cares more about selling than about them. Save memberships and seasonal offers for email to existing customers. The storm-day version belongs with your burst pipe triage plan, recorded in advance and switched on in one step, not written at 6 am on the morning of the freeze.
A callback offer you can keep
The callback option is the most valuable message in the loop and the easiest to ruin. It works only when three things are true: the system keeps the caller's place, the office really does call back in queue order, and the call arrives from a number the caller recognizes. Pew found that 19% of adults generally answer calls from unknown numbers[3], so a callback from a CSR's direct line can be ignored by the very person who asked for it.
Check the caller ID on callbacks
Place a test callback to a mobile and confirm it shows your main business number and name, not a system or carrier number.
Confirm the number before the caller hangs up
The system should read back the number it will dial or ask for one. A mobile beats a landline for someone who is outside dealing with a leak.
Promise a time only if you measure it
If your phone system reports average callback time, quote it. If not, say “in the order you called” rather than “within five minutes.”
Switch the offer off when you can't keep it
Near closing time, or when the callback list is longer than the CSRs can clear today, remove slot 2 instead of collecting promises nobody will keep.
Open the callback like a new call
“Hi, this is Dana from Bramble Street Plumbing calling you back; you were in our queue a few minutes ago.” Name first, reason second.
A queued callback is still a lead going cold. Treat it with the same urgency as any other return call; how fast to call back a plumbing lead sets out the targets.
- Caller
- System
- Your team
01Caller
Caller dials the main number
All three CSRs are on other calls.
02System
Slot 1 plays at once
Company name, a person will answer, press 1 if water is spreading.
03System
Callback offered at 30 sec
Press 2 to keep your place and get a call from the main number.
04Caller
Caller presses 2
The system reads back the mobile number it will call.
05Your team
CSR calls back in order
Company name first, then “you were in our queue a few minutes ago.”
Example sequence. Timings depend on your phone system's queue settings.
Hold music: licensing and sound
Plugging a radio or a streaming playlist into the phone system is common and risky. Copyright gives the owner of a song the exclusive right to perform it publicly[4], and the law's definition of performing “publicly” includes transmitting a performance to the public by any device, even when people hear it in different places at different times[5]. Callers on hold are hearing exactly that kind of transmission. Use the music supplied with your phone service once the provider confirms in writing that it is licensed for hold use, buy tracks sold specifically for telephone hold, or use a quiet tone and no music at all.
Sound matters as much as rights. Telephone audio is engineered for speech; the standard coding method many calls still rely on is titled for “voice frequencies”[6]. Busy music with heavy bass turns to mush on a phone line, and a voice recorded loud next to quiet music makes callers pull the phone away from their ear. Record in a quiet room, keep the music bed well below the voice, and listen on an ordinary mobile before you switch anything on.
Spanish and other languages
Where your service area has many Spanish-speaking households, record each slot in Spanish too, either in the same loop or on a Spanish queue. In 2019, 39% of people who spoke Spanish at home said they spoke English less than “very well,” and the share was higher still for Vietnamese and Chinese speakers[1]. A caller who cannot follow the English recording may never hear the emergency route.
Promise only what you can deliver. A Spanish hold message that ends with an English-only CSR is worse than none; record “a Spanish-speaking team member will call you back” only if one will. The wider setup, from greetings to bilingual staff, is in serving Spanish-speaking callers at a plumbing shop.
When the queue itself is the problem
The best hold message is one nobody hears. If callers regularly wait more than a minute or two, the fix is coverage, not a better recording: a second ring group, a call queue rather than a hunt group, or forwarding busy and unanswered calls somewhere they will be answered.
Decide in writing which calls never wait in a queue at all: an active leak, sewage backing up, and anyone who mentions gas, who should get the script in what your team should say when a caller smells gas. Water damage and freezing claims averaged $15,400 per homeowners claim over 2019 to 2023[7], which is a lot of ceiling to lose while a caller listens to music.
One option is to forward overflow to an SI Employee whenever every line is busy. Instead of a loop, the caller gets an answer in your business name, the job details are taken down and read back, urgent calls follow your on-call path, and a summary reaches your inbox by email, with the recording and transcript in your account (how it works). For a desk that takes dozens of calls a day, the commercial contractor example scenario models a different answer to the queue: each book of accounts gets its own line, and urgent calls go straight to the supervisor who owns them.
Test and refresh the recordings
- Call your own number from a mobile during a busy hour and hold for three full loops.
- Time every message and cut anything that runs over 20 seconds.
- Check the voice against the music on an ordinary phone, not studio headphones.
- Press every option: emergency, callback, Spanish. Make sure each one goes where the recording says.
- Review the scripts every spring and fall, and the day after any storm when the storm message was used.
- Delete seasonal messages the week the season ends. A caller in March should not hear about holiday hours.
Give one person ownership of the recordings, usually the office manager, and keep the current scripts in a shared document with the date each was recorded. When something changes, from a new emergency number to new hours, that person updates the greeting, the hold loop and the after-hours message on the same day.
Frequently asked questions
How long should an on-hold message be?
Each message 10 to 20 seconds, in a loop with music in between. Put the emergency route in the first message and the callback offer about 30 seconds in, so callers hear both before they think about hanging up.
Should we put promotions on hold?
No. Callers on hold mostly have a problem to solve, and an advert tells them the wait is for your benefit. Keep promotions for email and invoices.
Do we need a license for hold music?
If the music is copyrighted and you play it to callers, assume yes. Copyright covers public performance[4], and transmitting a performance to the public counts as performing it publicly[5]. Use music licensed for telephone hold, or none. This is general information, not legal advice.
Should the message tell callers their place in line?
Only when the queue is usually short. A high number tells a new caller to try another plumber; offering a callback works better when queues are long.
Should emergency callers ever be put on hold?
Avoid it. Give them a button in the first message that skips the queue, or route your emergency line around the queue entirely.
References
U.S. Census Bureau (2022). What Languages Do We Speak in the United States? (opens in a new tab) ↑
David Maister (in The Service Encounter, Lexington Books) (1985). The Psychology of Waiting Lines (opens in a new tab) ↑
Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) ↑
Legal Information Institute, Cornell Law School (U.S. Code) (2026). 17 U.S. Code § 106 - Exclusive rights in copyrighted works (opens in a new tab) ↑
Legal Information Institute, Cornell Law School (U.S. Code) (2026). 17 U.S. Code § 101 - Definitions (opens in a new tab) ↑
International Telecommunication Union (ITU-T) (2026). G.711: Pulse code modulation (PCM) of voice frequencies (opens in a new tab) ↑
Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑