Call handling

What your team should say when a caller smells gas

A gas smell call protocol for plumbing offices: get people out, no switches or phones inside, 911 and the utility first, and when to send a plumber.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why a written gas protocol matters
  2. The script, word for word
  3. What the caller must not do
  4. Who calls whom
  5. A faint smell near one appliance
  6. When the plumber is sent
  7. Technician safety on arrival
  8. Example: a gas call at 7 pm
  9. Gas calls after hours
  10. Mistakes to train out
  11. Put it in writing and test it
  12. Frequently asked questions
  13. References
Call handling: What your team should say when a caller smells gasArticle coverCALL HANDLINGWhat your team shouldsay when a callersmells gasAva for PlumbersInsightsCall handling: What your team should say when a caller smells gasArticle coverCALL HANDLINGWhat your team shouldsay when a callersmells gasAva for Plumbers

Key takeaways

  • When a caller smells gas, your CSR's job is not to book a plumber. It is to get everyone out of the building and get the gas utility or 911 involved.
  • The core script: leave now, leave doors open, no switches, no phones inside, call 911 and the gas company from a safe distance, and do not go back in until they say it is safe[1].
  • Gas leaks without ignition are about 600 times more common than ignited ones[2]. Nearly every gas call you take is in the window where the right words prevent harm.
  • The plumber goes after the utility has made the area safe, for repairs to house piping and appliances that must be done by a licensed plumber where required[3].

Why a written gas protocol matters

Plumbing offices take gas calls even though they are not the first responder. Customers smell gas near a water heater or a range and ring the company whose sticker is on the appliance. If the person answering hesitates, starts asking for an address or tries to diagnose the problem, the caller stays inside the building for longer.

A written protocol removes the hesitation. Everyone who answers your phone, including part-time CSRs, an answering service and the on-call tech's partner who picks up at night, says the same thing in the same order. Plumbers are often on call for emergencies[4], so make sure the protocol is in the after-hours phone as well as at the front desk.

Most gas leak calls happen before anything ignitesDerived from the study's finding that gas leaks without ignition are about 600 times more frequent than ignited ones (US fire department responses, NFIRS data).
Most gas leak calls happen before anything ignitesDonut chart. Leaks with no ignition: 99.8%; Leaks that ignited: 0.2%.Leaks with no ignition: 99.8%Leaks that ignited: 0.2%
  • Leaks with no ignition 99.8%
  • Leaks that ignited 0.2%

Source: PSE Healthy Energy, 2024[2]

Show the data
ItemValue
Leaks with no ignition99.8%
Leaks that ignited0.2%

A study of US fire department responses found that 2.4 million gas leak incidents required a response between 2003 and 2018, and that leaks without ignition were about 600 times more frequent than those that ignited[2]. In other words, the call you take is almost always before anything has gone wrong. That is the moment the protocol exists for.

The script, word for word

Train every CSR to say this from memory. Do not soften it.

"If you smell gas, please leave the building right now with everyone inside. Leave the door open behind you. Don't switch any lights on or off, and don't use your phone until you're outside and away from the smell. Once you're outside, call 911 and your gas company. Don't go back in until they tell you it's safe."

Then end the call so the caller can leave. If they are already outside, keep them on the line just long enough to confirm they have called 911 or the utility, then offer the follow-up booking.

What the caller must not do

Utility regulators publish the same list. Connecticut's lists it plainly[3], and your CSR should be able to repeat it:

  • Do not flip light switches on or off.
  • Do not use a telephone near the smell, including a cellphone.
  • Do not smoke, strike matches or light candles.
  • Do not use any electrical equipment, doorbells or elevators.
  • Do not adjust thermostats or appliance controls.
  • Do not try to find the source of an outdoor gas smell.
  • Do not start or move vehicles where gas may be present.
  • Never turn the gas back on after it has been shut off for safety.

Pennsylvania's regulator adds two practical points: leave windows and doors open on the way out, and if you are outdoors, move away from the area[1].

Who calls whom

Gas call responsibilities
WhoActionWhen
CallerLeaves the building, then calls 911 and the gas utility from a safe distanceImmediately
CSRGives the script, confirms the caller is leaving, ends the call quicklyFirst 30 seconds
CSRLogs the call with time, address and what the caller was toldAfter the call
Gas utility or fire departmentFinds the leak, makes the area safe, decides when people can returnOn arrival
Your plumberRepairs house piping or appliances once the area is declared safeAfter the utility clears the site
ManagerReviews the call recording or notes the next business dayWithin one day

Your company never replaces the utility's emergency response. Connecticut's regulator, for example, says local gas companies provide 24-hour emergency service every day of the year and send a field representative to make the area safe at no charge[3]. Check what your local utility offers and put its emergency number on the card.

A faint smell near one appliance

Some callers describe a faint smell near a stove or water heater and sound calm. Connecticut's guidance notes that a faint odor near an appliance may be a pilot light that has gone out, but it still tells people to call the gas company, and to leave first if the smell is strong or they are unsure[3].

Your CSR should not decide which case it is. The rule for your team is simple: any gas smell gets the same script. A plumber is not a substitute for the gas company's check, and a CSR on the phone cannot tell a pilot light from a leaking connector.

When the plumber is sent

Book a plumber only after the utility or fire department has made the site safe and the customer has been told it is safe to return. Typical follow-up work includes replacing a gas connector, repairing house piping after the utility has found the leak, or repairing a water heater or appliance connection. Repairs must meet local regulations and be done by a licensed plumber where required, or by the gas company[3].

"Once the gas company has checked it and said it's safe, call us back on this number and we'll book a technician to make the repair. If they leave a tag on the appliance or the meter, take a photo of it for us."

If the utility shuts off service and leaves a tag, the plumber needs to see it. Ask the customer to keep it.

Technician safety on arrival

Field safety matters as much as the phone script. Specialty trade contractors recorded 608 fatal work injuries in 2024[5]. A suspected gas leak is a hazard your technicians should never walk into without a plan, so give every technician a short arrival rule:

  1. If you smell gas on arrival, do not enter or use any switches. Move away and call the utility from a safe distance.
  2. If you are already inside, leave, leave the door open and call from outside.
  3. Do not start work on gas piping until the utility has cleared the site or your own testing equipment and procedures confirm it is safe, according to your company's written procedure and local code.
  4. Record what you found and who you spoke to.

Example: a gas call at 7 pm

Example: a fictional caller rings at 7:05 pm and says the basement smells like rotten eggs near the water heater. The CSR stops the booking questions and gives the script: leave now with everyone, leave the door open, no switches, no phone until outside, then call 911 and the gas company.

The caller says the children are upstairs. The CSR says, "Please get them and go now; you can call us back once you're outside." The call lasts under a minute. At 8:20 pm the customer rings back: the gas company found a loose connector, shut off the water heater supply and tagged it. Example: the CSR books a technician for 8 am to replace the connector and asks the customer to keep the tag for the technician.

Gas calls after hours

Night and weekend calls are where the protocol most often breaks down, because the person answering may be half asleep, driving or not trained as a CSR. Put the script on the on-call phone's lock screen or in a pinned note, and make sure any answering service or overflow line uses the same words.

After hours, there is a second temptation: the on-call tech offers to drive over and check. Unless your company has a written procedure and the right detection equipment, and the utility has already been called, the answer is still the same. The caller leaves and calls 911 and the gas company. Your technician can follow up once the site is safe, in daylight if possible, with a clear record of what the utility found.

Mistakes to train out

  • Asking for the address before giving safety instructions.
  • Telling the caller to "open the windows and wait" inside the building.
  • Asking the caller to check the pilot light or turn the gas valve.
  • Promising that a plumber will be there quickly instead of directing them to 911 and the utility.
  • Keeping the caller on the line inside the building while you take their details.
  • Booking a repair before anyone has made the site safe.

Put it in writing and test it

  1. Write the script on one card

    The exact words, the do-not list and the follow-up booking line.

  2. Put it everywhere calls are answered

    Front desk, after-hours phone, answering service instructions and any AI or overflow service you use.

  3. Test monthly

    Have a manager call in as a mock caller and check that the script is given within the first few seconds.

  4. Log every gas call

    Time, address, what was said and whether a follow-up was booked.

  5. Review with your insurer

    Some carriers have their own expectations for how contractors handle gas reports. Ask.

Frequently asked questions

Should a plumbing company respond first to a gas leak call?

No. The caller should leave the building and call 911 and the gas utility from a safe distance. The plumber is sent for repairs only after the utility or fire department has made the area safe.

What should callers avoid doing if they smell gas?

They should not switch lights on or off, use phones inside, light anything, use electrical equipment or adjust appliance controls. They should leave, call from outside and wait to be told it is safe.

What if the caller says it is only a faint smell?

Use the same script. A CSR cannot tell a pilot light from a leak over the phone. The gas company should check any gas smell.

Can the customer turn the gas back on after the utility leaves?

No. If the gas was shut off for safety, it should only be restored by the gas company or a qualified technician after the repair.

References

  1. Pennsylvania Public Utility Commission (2026). Gas Emergencies (opens in a new tab) โ†‘

  2. PSE Healthy Energy (2024). Gas Leaks Cost U.S. Fire Departments Nearly Half a Billion Dollars Each Year (opens in a new tab) โ†‘

  3. Connecticut Public Utilities Regulatory Authority (2026). What To Do If You Smell Natural Gas (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo