Metrics finance

Labor cost as a percentage of revenue for plumbers

How to calculate labor cost percentage in a plumbing company: which payroll to include, burdened vs raw wages, industry reference points and what moves it.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. What the ratio measures, and what it does not
  2. Three versions worth tracking
  3. How to calculate it
  4. Industry reference points
  5. Example: one month, three ratios
  6. What moves the ratio
  7. The companion metric: billable efficiency
  8. Using the number to make decisions
  9. Frequently asked questions
  10. References
Metrics finance: Labor cost as a percentage of revenue for plumbersArticle coverMETRICS FINANCELabor cost as apercentage of revenuefor plumbersAva for PlumbersInsightsMetrics finance: Labor cost as a percentage of revenue for plumbersArticle coverMETRICS FINANCELabor cost as apercentage of revenuefor plumbersAva for Plumbers

Key takeaways

  • Labor cost percentage is labor cost divided by revenue, but the answer depends entirely on which labor you count.
  • Track direct field labor, burdened, separately from office and management payroll.
  • Across plumbing, heating and AC contractors, total payroll was about 27% of receipts in 2022[1].
  • Industry payroll grew 8.9% from 2022 to 2023 while employment grew 3.2%, so pay per worker rose fast[2][3].
  • Pair the ratio with billable efficiency; a low percentage can mean strong prices or an overworked, under-staffed crew.

What the ratio measures, and what it does not

Labor cost percentage tells you how much of each dollar of revenue goes to the people who do the work. In a service trade where labor is the product, it is one of the few numbers that reacts quickly to both pricing and scheduling. Raise prices without changing staff and it falls. Add a tech who is not yet busy and it rises. Let overtime creep in and it rises again.

What it does not tell you is whether the business is healthy on its own. A shop can post a low labor percentage because it sells a lot of equipment with thin margins, or because techs are stretched across too many calls and callbacks are climbing. Read it alongside gross margin, billable hours and callback rate, never by itself.

The other trap is definition. Two owners comparing their labor percentage at a trade event are often comparing different things: one counts only tech wages, the other counts everyone on payroll including the owner. Before you compare with anyone, including your own past years, write down exactly what goes into the numerator.

Three versions worth tracking

Keep the definitions fixed so the trend means something.
VersionWhat goes in the numeratorBest used for
Direct labor (raw)Wages of field techs and apprentices for all paid hoursQuick monthly trend
Direct labor (burdened)Field wages plus payroll taxes, workers' compensation, health cover, retirement and paid leavePricing and job costing
Total payrollEveryone on payroll: field, office, dispatch, sales, managers and the owner's salaryComparing with Census industry data

Burdened direct labor is the version that matters most for pricing, because it reflects what a tech hour really costs. Benefits alone averaged about 30% of private-industry employer compensation costs in June 2026, with wages the other 70%[4]. A ratio built on raw wages will look comfortable while the business is quietly underpricing every hour.

Total payroll is the version to use when you look at government data, because Census reports payroll for all employees together. It is also the one buyers and lenders tend to see first, since it comes straight off the payroll reports.

How to calculate it

  1. Pick the period

    Use a full month, and also a rolling 12 months. Single months swing with holidays, weather and large jobs that bill late.

  2. Total the revenue

    Use invoiced revenue for the period from your accounting system, excluding sales tax collected and refunds.

  3. Total direct labor

    Add gross wages for field staff for all paid hours, including drive time, shop time, training and overtime premiums. Do not leave out unbillable hours; they are a real cost.

  4. Add the burden

    Add employer payroll taxes, workers' compensation premiums, health and retirement contributions and paid time off for the same staff.

  5. Divide and record

    Divide each labor figure by revenue and record the result next to billable hours, paid hours and revenue per billable hour for the same period.

Owner salary goes in total payroll, and the owner's field hours go into direct labor at a market wage. If the owner works for free, the ratio is flattering and prices will not survive the first hire.

Industry reference points

Census data gives a useful but broad benchmark. Payroll equalled about 27% of receipts at plumbing, heating and air-conditioning contractors in 2022[1]. That figure covers all employees and all kinds of work, from residential service to large mechanical contracts, and it excludes benefits. Treat it as a reference point for total payroll, not a target for direct labor.

27%

Payroll as a share of receipts, plumbing, heating and AC contractors, 2022[1]

Pay per worker has been rising faster than headcount. From 2022 to 2023, annual payroll in the industry rose 8.9% while employment rose 3.2%[2][3]. Average annual payroll per employee reached about $73,700 in 2023[5]. When pay per worker climbs faster than prices, the labor percentage creeps up even if nothing else in the business changes.

Change from 2022 to 2023, plumbing, heating and AC contractorsPayroll grew much faster than headcount
Change from 2022 to 2023, plumbing, heating and AC contractorsColumn chart. Establishments: 1.5%; Employees: 3.2%; Annual payroll: 8.9%.0%2.5%5%7.5%10%Establishments: 1.5%1.5%EstablishmentsEmployees: 3.2%3.2%EmployeesAnnual payroll: 8.9%8.9%Annual payrollChange from 2022 to 2023, plumbing, heating and AC contractorsColumn chart. Establishments: 1.5%; Employees: 3.2%; Annual payroll: 8.9%.0%2.5%5%7.5%10%Establishments: 1.5%1.5%Establishm-entsEmployees: 3.2%3.2%EmployeesAnnual payroll: 8.9%8.9%Annualpayroll

Source: U.S. Census Bureau, 2022-2023[2]

Show the data
ItemValue
Establishments1.5%
Employees3.2%
Annual payroll8.9%

Revenue per employee is the other side of the same ratio. Plumbing, heating and AC contractors generated about $260,000 in receipts per employee in 2022[6]. A shop well below that is either priced low, carrying idle capacity or doing more labor-heavy work than the industry mix; the labor percentage will show which once you split it by department.

Example: one month, three ratios

Example (fictional): an 8-truck residential shop invoiced $260,000 in October. Field wages for the month were $58,500, burden on those wages added $17,000, and office, dispatch and the owner's salary came to $24,000.

Example only: fictional one-month figures.
Example measureAmountShare of revenue
Revenue$260,000100%
Direct labor, raw wages$58,50022.5%
Direct labor, burdened$75,50029.0%
Office, dispatch and owner salary$24,0009.2%
Total payroll (wages only)$82,50031.7%

The Example owner thought labor was about 22% of revenue, which is the raw-wage figure. The burdened number is closer to 29%, and that is what prices must cover. The total payroll figure is a little above the Census reference point, which is expected for a service-heavy shop with its own dispatch team. None of these numbers is right or wrong on its own; the useful question is how each moves month to month.

What moves the ratio

  • Prices. A price update lowers the ratio immediately if staffing stays the same. If the ratio jumps after a wage increase, prices have not caught up.
  • Billable efficiency. Billable hours divided by paid hours. Drive time, waiting for parts and callbacks all push it down and the labor share up.
  • Overtime. Premium pay raises cost without raising revenue unless after-hours work is priced to match.
  • Work mix. Installs with high material content lower the labor share; diagnostic and repair work raises it. A change in mix can move the ratio with no change in performance.
  • Crew structure. An apprentice paired with a journeyman costs less per hour but may add time on the job. Track both.
  • Seasonality. Slow months with full payroll push the ratio up; plan for it rather than reacting with layoffs.

Because work mix moves the ratio so much, split it by department. Our guide to department P&Ls shows how to tag labor hours to service, install, drain and commercial work.

The companion metric: billable efficiency

Labor percentage tells you the cost; billable efficiency tells you why. Divide hours that ended up on an invoice by hours you paid for. The gap is drive time, shop time, waiting on parts or customers, training, and callbacks that could not be billed. Every one of those hours sits in the numerator of the labor ratio without adding to revenue.

Track it per tech and per department each week. A drop of a few points across the whole crew usually points to dispatch or routing; a drop for one tech points to training, a difficult job or a vehicle problem. Fixing efficiency is often cheaper than raising prices, because it adds revenue capacity without asking customers to pay more.

  • Group calls by area so techs do not cross town between jobs.
  • Stock trucks for the five most common tasks to cut supply-house runs.
  • Confirm appointments the day before so fewer visits end with nobody home.
  • Log callbacks against the original job so the cost lands where it belongs.

Using the number to make decisions

A rising labor percentage should trigger a short investigation rather than a hiring freeze. Check billable efficiency first; if paid hours rose and billable hours did not, the problem is scheduling, dispatch or demand, not wages. Check prices second, using a sample of recent jobs as described in checking whether your prices cover your costs. Check overtime third.

A falling labor percentage is not automatically good news. If it falls because callbacks are rising and techs are rushing, customer reviews and repeat business will show it a few months later. Pair the ratio with callback rate and average review score on the same report.

Before you add a tech or a truck, model what the ratio will look like for the first three months, when the new hire is paid in full but not yet fully booked. That temporary rise is normal and worth planning for. Comparing labor cost with the cost of adding office staff is also useful; our guide on AI vs hiring another CSR covers that side of payroll.

Frequently asked questions

What is a good labor cost percentage for a plumbing company?

It depends on which labor you count and the mix of work. Census data puts total payroll at about 27% of receipts across plumbing, heating and AC contractors, but that includes all staff and excludes benefits. Track your own burdened direct labor and watch the trend.

Should I include benefits in labor cost?

For pricing, yes. Burdened labor, meaning wages plus payroll taxes, workers' compensation, health cover and paid time off, is the true cost of a tech hour. Raw wages understate it.

Does the owner's salary count as labor?

It belongs in total payroll. If the owner also runs calls, count those hours in direct labor at a market wage so prices still work when someone else does that work.

Why did my labor percentage go up when sales were steady?

Usually because pay rose without a price update, billable efficiency fell, overtime increased, or the work mix shifted toward labor-heavy repair work. Check each in turn.

References

  1. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  2. U.S. Census Bureau (2022-2023). County Business Patterns 2022, U.S. national file (cbp22us) (opens in a new tab) โ†‘

  3. U.S. Census Bureau (2022-2023). County Business Patterns 2022, U.S. national file (cbp22us) (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ†‘

  5. U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) โ†‘

  6. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo