Call handling

High water bill calls: triage before the truck rolls

Phone triage for high water bill calls: read the bill, run the toilet dye and two-hour meter tests, spot hidden leaks and know when to book leak detection.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing9 min read

On this page
  1. A leak call where nobody has seen water
  2. Read the bill with them first
  3. Checks the caller can do from the phone
  4. Reading the results: what to book
  5. Signs of a hidden leak
  6. When not to send a truck
  7. Example: a two-part call
  8. When the office is closed
  9. Frequently asked questions
  10. References
Call handling: High water bill calls: triage before the truck rolls9%: of US homes have leaks that waste 50 gallons of water or more a dayCALL HANDLINGHigh water bill calls:triage before the truckrolls9%of US homes have leaks that waste 50 gallons of water or more adayAva for PlumbersInsightsCall handling: High water bill calls: triage before the truck rolls9%: of US homes have leaks that waste 50 gallons of water or more a dayCALL HANDLINGHigh water billcalls: triage beforethe truck rolls9%of US homes have leaks that waste 50gallons of water or more a dayAva for Plumbers
Figure source: U.S. Environmental Protection Agency, WaterSense, 2026[1]

Key takeaways

  • Read the bill first: gallons, days covered, estimated readings and the same month last year explain many “leaks”.
  • Give two free checks before booking: the 10-minute toilet dye test and a two-hour meter test with no water in use[1].
  • A meter that moves with everything off means a leak; one that keeps moving with the house main closed points to the service line.
  • Warm floors, running-water sounds and damp walls move the call up the list. The average water damage claim was $15,400[2].
  • When the checks come back clean, say so. Honest triage earns more trust than a visit that finds nothing.

A leak call where nobody has seen water

High water bill calls start with paper, not puddles. The caller has a bill that is double the usual, no visible leak and a strong suspicion that someone, the utility or the last plumber, got something wrong. Sending a truck straight away can waste a visit on a running toilet the caller could have found in ten minutes. Brushing the caller off can miss the slab leak quietly soaking a foundation.

Both outcomes are common. EPA estimates that the average household's leaks waste more than 9,300 gallons of water a year, and that 9% of homes have leaks wasting 50 gallons or more a day[1]. With the average family spending more than $1,000 a year on water[3], a leak of that size shows up on the bill long before it shows up on a ceiling.

Water wasted in a year by common household leaksEPA figures; each is a minimum (“more than”).
Water wasted in a year by common household leaksBar chart. Showerhead leaking 10 drips a minute: 500 gallons; Faucet dripping once a second: 3,000 gallons; Average household's leaks combined: 9,300 gallons.Showerhead leaking 10 drips a minuteShowerhead leaking 10 drips a minute: 500 gallons500 gallonsFaucet dripping once a secondFaucet dripping once a second: 3,000 gallons3,000 gallonsAverage household's leaks combinedAverage household's leaks combined: 9,300 gallons9,300 gallonsWater wasted in a year by common household leaksBar chart. Showerhead leaking 10 drips a minute: 500 gallons; Faucet dripping once a second: 3,000 gallons; Average household's leaks combined: 9,300 gallons.Showerhead leaking 10 drips a minuteShowerhead leaking 10 drips a minute: 500 gallons500 gallonsFaucet dripping once a secondFaucet dripping once a second: 3,000 gallons3,000 gallonsAverage household's leaks combinedAverage household's leaks combined: 9,300 gallons9,300 gallons

Source: U.S. Environmental Protection Agency, WaterSense, 2026[1]

Show the data
LeakGallons a year
Showerhead leaking 10 drips a minute500 gallons
Faucet dripping once a second3,000 gallons
Average household's leaks combined9,300 gallons

So the call is triage: help the caller find the easy leaks themselves, recognize the hidden ones, and book leak detection only when the evidence points there.

Read the bill with them first

Before any test, get the facts off the bill. Ask the caller to have it in hand.

  • “How many gallons, or units, does this bill show, and how many did the same period last year?” Some utilities bill in hundreds of cubic feet, where one unit is about 748 gallons.
  • “How many days does this bill cover?” A longer period, or a catch-up bill after estimated readings, can look like a leak.
  • “Does it say actual or estimated reading?” An estimate followed by an actual read often produces one unusually high bill.
  • “How many people live there, and has anything changed: guests, a new pool, a new sprinkler schedule?”

EPA suggests looking at a winter month such as January or February, when outdoor watering is low; a family of four using more than 12,000 gallons a month could have serious leaks[1]. As a rough Example: at EPA's average of 82 gallons per person per day at home[3], a family of four uses about 9,840 gallons in a 30-day month, which fits EPA's separate estimate that the average family uses more than 300 gallons a day at home, roughly 70% of it indoors[4]. A winter bill well above 12,000 gallons for that household is worth chasing. A summer bill at the same level may simply be the sprinklers, because outdoor use averages more than 30% of household water[3].

Checks the caller can do from the phone

These checks need no tools and carry no risk. Walk the caller through them, or let them go and do them and agree a time to talk again.

  1. Toilet dye test

    A few drops of food coloring in each toilet tank, then no flushing. If color shows in the bowl after 10 minutes, that toilet is leaking[1]. Test every toilet, including the basement one nobody uses.

  2. Listen and look

    With the house quiet, listen for a toilet refilling on its own or a fixture hissing, and look for a dripping water heater relief line. Check under sinks and behind the washing machine.

  3. Find the meter

    Usually in a covered box near the curb, or where the line enters the basement or garage. Many meters have a small low-flow indicator that turns whenever any water moves.

  4. Two-hour meter test

    Read the meter, use no water for two hours, then read it again. If it changed at all, there is probably a leak[1]. Bedtime to morning works too, with the ice maker and water softener off.

  5. Split inside from outside

    If the meter moves with everything off, close the house's main shutoff, but only if it turns freely, and watch again. Still moving means the leak is likely between the meter and the house.

  6. Check the yard

    Soggy patches, unusually green grass or a sinking spot along the line from the meter, and sprinkler heads that keep weeping after the system shuts off.

Then ask about the water users people forget. A water softener stuck in its regeneration cycle, a boiler whose automatic fill valve keeps topping up a leaking heating system, a pool or pond with an auto-fill, a reverse osmosis filter's drain line, a humidifier on the furnace or an evaporative cooler can each run water around the clock with nothing visibly wrong. None of them shows up in a dye test, and all of them move a meter. A caller who says “we put in a softener last month” has just given you a better lead than any test.

Toilets earn the first test because they are the usual suspect. They account for nearly 30% of a home's indoor water use, and older models can use as much as 6 gallons per flush[5]. A worn flapper leaks silently into the bowl, and EPA advises replacing flappers at least every five years[1]. A caller with old toilets and a high bill is also a good fit for the water-saving services homeowners ask for, once the leak is dealt with.

Reading the results: what to book

Example decision table for high water bill calls. Match the last column to the services you offer.
What the caller foundLikely sourceWhat to book
Color in the bowl after the dye testToilet flapper or fill valveA routine toilet repair, or nothing if the caller fixes it
Meter moves with fixtures off, stops when the house main is closedA leak inside the house: a fixture, a supply line, or a pipe in a wall or slabLeak detection, sooner if there are other signs
Meter still moves with the house main closedThe service line between meter and houseLeak detection and a likely line repair, priority slot
Warm spot on the floor, or running water heard with everything offPossible slab leak, often on the hot sideLeak detection with thermal and acoustic tools, priority slot
Meter still for two hours, no toilet leaksNo active leak: billing, usage or a past leakNo truck; suggest the caller ask the utility to re-read or explain the bill
Summer bill, soggy lawn, sprinklers runningIrrigation leak or scheduleIrrigation repair if you offer it, or a referral

Irrigation leaks are easy to underestimate. A hole 1/32 of an inch across, about the thickness of a dime, can waste about 6,300 gallons a month[1]. If you do not service irrigation, say so and refer the caller, but confirm the house side is clean first.

For the tools and process once a tech is on site, see leak detection tools: acoustic, thermal and tracer gas.

Signs of a hidden leak

Some callers have more than a bill. These signs move the call up the list, because the water may be going somewhere it causes damage:

  • A warm patch on a tile or concrete floor, or a pet that has started sleeping in one particular spot.
  • The sound of running water when every fixture is off.
  • A water heater firing or running far more often than it used to.
  • New cracks in tile or flooring, a musty smell, or damp drywall near a wall with plumbing in it.
  • Water pressure that dropped around the same time the bill went up.

Hidden leaks are how small problems become insurance claims. The average homeowners insurance claim for water damage and freezing was $15,400 over 2019 to 2023[2], and what the water damage data means for plumbers goes further into the numbers. Ask the caller to photograph the meter readings and any damage, with the date, which helps both the tech and any claim. For customers who want early warning next time, smart water shutoff valves are worth a mention after the repair.

When not to send a truck

If the meter stays still for two hours, every toilet passes the dye test and there are no other signs, tell the caller so. Suggest they ask the utility for a re-read or a usage breakdown, and offer a visit if they still want someone to look. Being straight about it costs you one possible service call and earns a caller who believes you next time.

If the caller needs time to run the meter test, agree the follow-up before you hang up: a time, and the number you will call from. Only 19% of adults say they generally answer calls from unknown numbers[6], so an unexpected callback often lands in voicemail. Better still, ask them to call back with the readings, and keep the job open on your board until they do.

Example: a two-part call

A fictional call showing the order. The caller's bill is roughly double the usual for a winter month.

  • Caller: “My water bill just doubled and I don't see a leak anywhere.”
  • CSR: “That's frustrating, and it's worth tracking down. Do you have the bill there? How many gallons does it show, and what did the same month show last year?”
  • Caller: “About 14,000 gallons in this example. Last year it was around 7,000. It's just the two of us.”
  • CSR: “For two people in winter, that usually means water is going somewhere. Two quick checks first. Put a few drops of food coloring in each toilet tank and don't flush for ten minutes. Then tonight, read the water meter before bed and again in the morning before anyone uses water.”
  • Caller, next morning: “The meter moved overnight. The toilets were fine.”
  • CSR: “Then the leak is somewhere in the plumbing, not a toilet, so I'd like to book a leak detection visit. I have today at 1 or tomorrow at 9. Is anywhere in the house warm underfoot or damp?”

The CSR never guessed at the source or quoted a repair. The caller ran two free checks, the result pointed to a hidden leak, and the visit was booked with the tech already knowing it is not a toilet.

When the office is closed

High bill calls are rarely emergencies, which makes them a good fit for an answering setup that follows a script. An SI Employee can take the bill details, walk the caller through the dye test and the overnight meter reading in the words you approve, and book a leak detection visit into one tested schedule or leave it as a request for your office. If the caller mentions water coming through a ceiling or pooling on a floor, it switches to your urgent on-call path instead. The answers arrive in the emailed summary, and they can also be sent to your own systems by webhook; see AssistCall integrations.

Example: a high bill call on a Saturday afternoon
  • Caller
  • SI Employee
  • System
  • Your team
  1. 01Caller

    Caller reports a high bill

    “My water bill doubled and there's no leak I can see.”

  2. 02SI Employee

    Reads the bill with them

    Gallons this period, the same month last year, people at home, estimated reads.

  3. 03SI Employee

    Guides the two checks

    Toilet dye test and an overnight meter reading, in the approved words.

  4. 04System

    Spots urgent signs

    Water visible or spreading: on-call path. Otherwise: a leak check slot.

  5. 05Your team

    Office follows up

    Bill details and test results arrive by email; staff confirm the visit.

Example sequence for a fictional shop. The checks given are the ones the owner approves.

For a one-van shop, the solo plumber example shows how calls like this can be handled while the owner stays on the job in front of them.

Frequently asked questions

Should we charge for a leak detection visit if no leak is found?

That is a pricing decision for your shop. Whatever you decide, say it on the call so the caller is not surprised, and run the phone checks first so fewer visits find nothing.

Can the utility reduce the bill after a leak?

Many utilities have a policy for bills caused by leaks that were repaired, but the rules differ. Tell the caller to ask their utility, and give them an invoice that describes the leak and the repair.

The caller can't open the meter box. What then?

Do not ask them to force it; meter boxes can hold standing water, insects or a heavy lid. Some utilities show recent usage online or will check the meter. Otherwise the meter test can wait for the visit.

What if the caller rents?

Take the details and the landlord's or manager's contact. The tenant can run the dye test, but the owner decides on leak detection and repairs.

Does a high summer bill mean there's a leak?

Not necessarily. Outdoor use averages more than 30% of household water[3], so sprinklers can explain a summer spike. Run the same meter test with the irrigation off to be sure.

References

  1. U.S. Environmental Protection Agency, WaterSense (2026). Fix a Leak Week (opens in a new tab) ↑

  2. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑

  3. U.S. Environmental Protection Agency, WaterSense (2026). WaterSense Statistics and Facts (opens in a new tab) ↑

  4. U.S. Environmental Protection Agency, WaterSense (2026). How We Use Water (opens in a new tab) ↑

  5. U.S. Environmental Protection Agency, WaterSense (2026). Residential Toilets (opens in a new tab) ↑

  6. Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo