Technology AI

Leak detection tools: acoustic, thermal and tracer gas

Acoustic, thermal and tracer gas leak detection for plumbers: what each finds, a locate process from meter test to pinpoint, buying order, service lines.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why leak detection is worth building
  2. The main tools and what they find
  3. A locate process from meter to pinpoint
  4. Choosing the tool for the conditions
  5. Service lines that leak detection opens
  6. Buying order for a growing shop
  7. Write a report customers and insurers can use
  8. Worked example: a slab leak call
  9. Scripts for the phone
  10. Frequently asked questions
  11. References
Technology AI: Leak detection tools: acoustic, thermal and tracer gasArticle coverTECHNOLOGY AILeak detection tools:acoustic, thermal andtracer gasAva for PlumbersInsightsTechnology AI: Leak detection tools: acoustic, thermal and tracer gasArticle coverTECHNOLOGY AILeak detection tools:acoustic, thermal andtracer gasAva for Plumbers

Key takeaways

  • Leaks are common: EPA says 9% of US homes have leaks wasting 50 gallons or more a day.
  • No single tool finds every leak; acoustic, thermal, tracer gas and pressure isolation each work best in different conditions.
  • Follow a fixed process: confirm with the meter, isolate by pressure testing, locate with the right tool, then pinpoint before cutting.
  • Start with a moisture meter, a thermal camera and an acoustic listening set, and add tracer gas when slab and buried-line work justifies it.
  • Sell detection as its own service with a written report, which also helps customers with insurance claims.

Why leak detection is worth building

Hidden leaks are one of the most common reasons homeowners call a plumber without knowing what is wrong. EPA's WaterSense program says 9% of US homes have leaks that waste 50 gallons or more a day, and that the average household's leaks can waste more than 9,300 gallons a year[1]. Nationally, household leaks waste the equivalent of the annual water use of nearly 11 million homes[2].

Some of those leaks are a dripping fixture; others are a pinhole in a copper line under a slab or a split in a buried service line. When a leak causes damage, the cost climbs fast: the average homeowners insurance claim for water damage and freezing was about $15,400 over 2019 to 2023[3]. A shop that can find a hidden leak precisely, without tearing up a house, earns trust and often the repair as well.

Water wasted by common leaks, gallons per yearIrrigation figure annualized from EPA's monthly estimate; household figure is an average
Water wasted by common leaks, gallons per yearBar chart. Irrigation leak 1/32 inch across: 75,600 gallons; Average household's leaks: 9,300 gallons; Faucet dripping once per second: 3,000 gallons; Showerhead leaking 10 drips per minute: 500 gallons.Irrigation leak 1/32 inch acrossIrrigation leak 1/32 inch across: 75,600 gallons75,600 gallonsAverage household's leaksAverage household's leaks: 9,300 gallons9,300 gallonsFaucet dripping once per secondFaucet dripping once per second: 3,000 gallons3,000 gallonsShowerhead leaking 10 drips per minuteShowerhead leaking 10 drips per minute: 500 gallons500 gallonsWater wasted by common leaks, gallons per yearBar chart. Irrigation leak 1/32 inch across: 75,600 gallons; Average household's leaks: 9,300 gallons; Faucet dripping once per second: 3,000 gallons; Showerhead leaking 10 drips per minute: 500 gallons.Irrigation leak 1/32 inch acrossIrrigation leak 1/32 inch across: 75,600 gallons75,600 gallonsAverage household's leaksAverage household's leaks: 9,300 gallons9,300 gallonsFaucet dripping once per secondFaucet dripping once per second: 3,000 gallons3,000 gallonsShowerhead leaking 10 drips per minuteShowerhead leaking 10 drips per minute: 500 gallons500 gallons

Source: U.S. Environmental Protection Agency, WaterSense, 2026[1]

Show the data
ItemValue
Irrigation leak 1/32 inch across75,600 gallons
Average household's leaks9,300 gallons
Faucet dripping once per second3,000 gallons
Showerhead leaking 10 drips per minute500 gallons

The main tools and what they find

Example overview of leak detection tools used by plumbing companies.
ToolHow it worksBest forLimits
Water meter and pressure test gaugesConfirms water is being lost and isolates sections of the systemEvery job: proving a leak exists and narrowing whereDoes not show the exact spot
Moisture meterMeasures moisture in drywall, wood and some flooringWalls, ceilings, cabinets, subfloorsSurface reading only; can be fooled by condensation
Thermal imaging cameraShows temperature differences on surfacesHot-water slab leaks, radiant lines, wet areas behind wallsNeeds a temperature difference; less useful on cold-side leaks in some conditions
Acoustic listening equipmentGround microphones and sensors pick up the sound of escaping waterPressurized lines under slabs, yards and wallsBackground noise, deep burial and soft soils weaken the signal
Tracer gasA safe gas mix is introduced into a drained line and detected where it escapesVery small leaks, quiet leaks, lines under thick slabs or hard surfacesNeeds line draining and setup time; specialist detector
Line locatorTraces the route and depth of metallic or traceable pipesMapping where the line runs before pinpointingPlastic pipe needs a tracer wire or sonde

Hot-water leaks matter for energy as well as water. Water heating, lighting and refrigeration together made up about a quarter of household energy use in 2020[4], and a hot-side slab leak keeps the water heater running to reheat water that disappears into the ground. Thermal imaging is often the fastest way to see that kind of leak from the surface.

A locate process from meter to pinpoint

  1. Confirm the leak

    Turn off all fixtures and appliances, check the meter's leak indicator and read the meter again after a set time. No movement usually means no supply-side leak.

  2. Split inside and outside

    Close the main shutoff at the house. If the meter still moves, the leak is on the service line between meter and house.

  3. Isolate by pressure test

    Test hot and cold sides separately, and isolate branches where valves allow. Note how fast pressure drops.

  4. Map the line

    Use plans, visible pipe routes and a line locator to trace where the leaking section runs.

  5. Locate

    Choose the tool for the conditions: thermal for hot-side slab leaks, acoustic for pressurized lines under hard surfaces, tracer gas for very small or quiet leaks.

  6. Pinpoint and confirm

    Narrow the spot with a second method where possible, and mark it. Confirm before anyone cuts a floor or digs.

  7. Report

    Record readings, photos, thermal images and the marked location in a short written report for the customer.

Choosing the tool for the conditions

  • Hot-water line under a slab: thermal camera first, then acoustic confirmation.
  • Cold-water line under tile or concrete: acoustic listening, or tracer gas if the leak is small or the surface is noisy.
  • Leak behind a finished wall: moisture meter and thermal camera to find the wet area, then a small inspection opening.
  • Buried service line in a yard: line locator to trace it, then acoustic ground microphone along the route.
  • Very slow pressure drop with no sound: tracer gas.
  • Irrigation system: zone-by-zone isolation and a walk of the zone with the system running.

Two methods agreeing is the best protection against an expensive wrong cut. Build that into your standard process for slab work.

Service lines that leak detection opens

  1. Slab leak detection and repair, including spot repair, rerouting overhead and full repipes.
  2. Service line leak location and replacement between the meter and the house.
  3. High water bill investigations for homeowners and landlords.
  4. Insurance documentation: a clear report of the leak's location and cause helps customers with claims.
  5. Irrigation leak finding, which matters in dry regions where outdoor water use can be a large share of the bill.
  6. Commercial and multi-unit work, where one hidden leak can affect several units.

Customers have a money reason to act. EPA says fixing easily corrected household leaks can save about 10% on water bills[1], and the average family spends more than $1,000 a year on water costs[2].

Buying order for a growing shop

You do not need every tool at once. Buy in the order that matches your calls and train as you go.

  • Stage one: pressure test gauges, a moisture meter and a good thermal camera. These cover a large share of residential calls.
  • Stage two: an acoustic listening set with ground microphones and a line locator, for slab and service line work.
  • Stage three: tracer gas equipment and a detector, when slab and buried-line jobs are frequent enough to justify the time and cost.
  • Training: manufacturer training for each tool, followed by supervised jobs; leak detection is a skill, and the tool is only part of it.

Track what each tool earns. For every detection job, note which tool found the leak, how long the locate took and whether the repair followed. After six months the pattern shows which tool to buy next and which techs need more practice.

Write a report customers and insurers can use

The report is part of the product. A customer who has just learned there is a leak under the kitchen floor wants to know where, why and what it will take, and their insurer may ask the same questions. A one-page report sent the same day answers them and makes your recommendation easier to accept.

  • Address, date, technician and the customer's description of the problem.
  • Meter test and pressure test results, with the times and readings.
  • The tools used and what each showed, with thermal images and photos of the marked location.
  • The confirmed or most likely leak location, with a simple sketch or floor plan mark.
  • Visible damage found, if any, and anything you could not check.
  • Repair options with the pros and cons of each, and the next step.

Keep the language factual. Describe what you measured and saw, and avoid guessing at causes you cannot confirm. Store the report with the job, so the repair tech and any later visit have the same information.

Worked example: a slab leak call

Example: a fictional customer calls about a warm spot on a tile floor and a water bill that has doubled. The CSR asks them to check whether the meter's leak indicator moves with everything off; it does. The tech arrives, confirms with the meter, closes the main and sees the meter stop, so the leak is inside the house. A pressure test shows the hot side losing pressure and the cold side holding. The thermal camera shows a warm line running across the kitchen floor with a hot spot near the island. An acoustic check over that spot gives the loudest reading in the same place. The tech marks it, writes a report with thermal images and offers two options: open the floor for a spot repair or reroute the hot line through the attic. The customer chooses the reroute, and the shop books it for the next day.

Scripts for the phone

High water bill caller: Before we send someone, can you try a quick check? Turn off every tap and appliance that uses water, then look at your water meter. If the small dial or triangle is moving, water is going somewhere, and our leak detection visit will find where. If it isn't moving, the problem may be a running toilet or irrigation, which is a simpler fix.

Warm floor caller: A warm spot on the floor can mean a hot-water line leaking under the slab. Please turn off the water heater supply valve if you can, and we'll bring a thermal camera and listening equipment to find the exact spot without breaking up the floor first.

For devices that stop leaks before they spread, see smart water shutoff valves as a service line; for digital reports and forms, digital forms and checklists for technicians.

Frequently asked questions

What is the best tool for finding a slab leak?

There is no single best tool. Thermal cameras work well on hot-water slab leaks, acoustic equipment on pressurized lines under hard surfaces and tracer gas on very small or quiet leaks. Confirm with a second method before cutting.

How do plumbers confirm a hidden leak?

With everything turned off, they watch the water meter's leak indicator, then close the main shutoff and pressure test hot and cold sides separately to narrow the location.

Is tracer gas leak detection safe?

Leak detection tracer gas is a safe, non-flammable mix used in drained lines. The equipment and procedure need training; follow the manufacturer's instructions.

Should leak detection be charged separately from the repair?

Many shops sell detection as its own service with a written report. It reflects the skill and equipment involved and helps customers with insurance claims.

References

  1. U.S. Environmental Protection Agency, WaterSense (2026). Fix a Leak Week (opens in a new tab) โ†‘

  2. U.S. Environmental Protection Agency, WaterSense (2026). WaterSense Statistics and Facts (opens in a new tab) โ†‘

  3. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

  4. U.S. Energy Information Administration (2020). Use of energy explained: Energy use in homes (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo