Metrics finance

Gross margin for plumbing companies: how to calculate

How to calculate gross margin in a plumbing company: what belongs in cost of goods sold, the gray areas, a worked example and how to raise it.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Gross margin in one line
  2. What goes in cost of goods sold
  3. The gray areas, and a rule for each
  4. Calculating it step by step
  5. Example: one month at a small shop
  6. Industry context for the labor line
  7. Material costs move faster than price books
  8. Reading the trend each month
  9. Ways to raise gross margin
  10. Frequently asked questions
  11. References
Metrics finance: Gross margin for plumbing companies: how to calculateArticle coverMETRICS FINANCEGross margin forplumbing companies: howto calculateAva for PlumbersInsightsMetrics finance: Gross margin for plumbing companies: how to calculateArticle coverMETRICS FINANCEGross margin forplumbing companies:how to calculateAva for Plumbers

Key takeaways

  • Gross margin is revenue minus the direct costs of doing the work, divided by revenue; the hard part is deciding consistently what counts as direct.
  • Put field labor at its loaded cost, including payroll taxes and benefits, plus materials, permits, subcontractors and job-specific disposal in cost of goods sold.
  • Payroll alone equalled about 27% of receipts at plumbing, heating and AC contractors in 2022, before materials[1].
  • Material prices move fast: the producer price index for copper and brass mill shapes rose about 30% from September 2025 to September 2026[2].

Gross margin in one line

Gross margin is gross profit divided by revenue, where gross profit is revenue minus the cost of goods sold. In a plumbing company, cost of goods sold means the costs that exist only because a job was done: the technician's time on that job, the parts installed, the permit pulled and the subcontractor hired for it. Everything else, from the office lease to the marketing budget, sits below the gross profit line as overhead.

Gross margin is the first test of whether your prices work. If it is too thin, overhead and profit have nothing to come out of, however busy the trucks are. It is also the number lenders, buyers and bookkeepers look at first, so it pays to calculate it the same way every month.

Margin is not the same as markup. Markup is calculated on cost and margin on price, so a part bought for a given amount and marked up by half produces a margin of one third, not one half. Mixing the two in a price book is one of the most common reasons owners think they are earning more than they are.

What goes in cost of goods sold

Typical cost of goods sold treatment for a plumbing service company
CostIn COGS?Why
Technician wages for time on jobsYesDirect labor, varies with work done
Payroll taxes, workers comp and benefits on that laborYesPart of the true cost of a field hour
Materials and parts installedYesConsumed by the job
Permits and inspection feesYesExist only because of the job
Subcontractors such as excavation or concreteYesBought for a specific job
Equipment rental for a jobYesJob-specific
Disposal fees for removed equipmentYesJob-specific
Sales commissions and spiffsUsually yesTied directly to sold work
Office staff, dispatch, customer serviceNoOverhead that supports all jobs
Marketing and lead costsNoOverhead, tracked as acquisition cost
Rent, software, insurance, owner salaryNoOverhead

The gray areas, and a rule for each

  • Vehicles. Fuel and maintenance for field trucks can go either way. Many service shops keep them in overhead and recover them through the hourly rate; what matters is choosing once and staying consistent.
  • Non-billable technician time. Training days, shop time and waiting for parts are real costs. Put them in COGS as unapplied labor, or your margin looks better than the business is.
  • Warranty callbacks. Labor and parts on a no-charge return visit belong in COGS for the original job type. Hiding them in overhead makes your worst jobs look profitable.
  • Card processing fees. Most shops treat them as overhead, but if a large share of revenue is paid by card, track them as a percentage so price changes account for them.
  • Shop supplies and small consumables. Rags, solder and thread sealant are usually charged through a flat percentage or a materials line; either way, record them the same way every month.
  • Apprentices. Wages for an apprentice on a job are direct labor even if they do not bill separately.

Write your COGS rules on one page and give a copy to your bookkeeper. A gross margin that changes because the accounts were coded differently is worse than no number at all.

Calculating it step by step

  1. Total revenue for the period

    Use invoiced revenue, net of sales tax and refunds, for one month or one quarter.

  2. Add direct labor at loaded cost

    Take field wages from payroll, including unapplied hours, then add employer payroll taxes, workers compensation and the employer share of benefits.

  3. Add materials

    Use the cost of parts actually installed. If you buy stock in bulk, adjust for the change in truck and warehouse inventory or your margin will jump around with purchasing.

  4. Add other job costs

    Permits, subcontractors, equipment rental, disposal and commissions tied to sold work.

  5. Subtract and divide

    Gross profit equals revenue minus the total of steps two to four. Gross margin equals gross profit divided by revenue.

  6. Repeat by department

    Run the same calculation for service, drain, replacement and new construction. A healthy company total can hide one department that loses money.

Example: one month at a small shop

Example: a fictional four-technician residential shop records the following for October. All figures are illustrative.

Example gross margin calculation, fictional data
LineAmountShare of revenue
Revenue$182,000100%
Field wages, including unapplied hours$41,60022.9%
Payroll taxes, workers comp, benefits$13,7007.5%
Materials installed$36,40020.0%
Permits, subcontractors, disposal$6,3003.5%
Commissions on sold work$5,5003.0%
Gross profit$78,50043.1%

Example, continued: if the same shop had left benefits and unapplied hours out of COGS, gross margin would have shown above half of revenue, and the owner would have priced next year's work against a number that never existed.

Industry context for the labor line

Census figures show how heavy labor is in this industry. In 2022, plumbing, heating and AC contractors reported receipts of about $306.3 billion and annual payroll of $82.2 billion, so payroll equalled roughly 27% of receipts[1]. That payroll covers office and management staff as well as field crews, so it is not a direct COGS benchmark, but it shows why labor accounting deserves the most care.

Payroll as a share of receipts, plumbing, heating and AC contractors, 2022All payroll, including office staff; materials and other costs are on top
Payroll as a share of receipts, plumbing, heating and AC contractors, 2022Donut chart. Payroll: 26.9%.Payroll: 26.9%26.9%
  • Payroll 26.9%

Source: U.S. Census Bureau, 2022[1]

Show the data
ItemValue
Payroll26.9%

Wages are only part of the cost. Across private industry in June 2026, employers paid an average $46.89 per hour worked in total compensation, of which benefits were $14.07, or 30.0%[3]. At plumbing, heating and AC contractors, average hourly earnings rose about 4.4% in the year to September 2026, preliminary[4]. If your prices were set before that rise and your COGS only counts base wages, the margin you report is overstated twice.

Material costs move faster than price books

The producer price index for plumbing fixtures and fittings rose about 5.8% between September 2025 and September 2026 and about 34% since September 2019[5]. The index for copper and brass mill shapes, which tracks the metal behind pipe and fittings, rose about 30% in the year to September 2026[2]. A price book updated once a year cannot keep up with moves like that, and the materials share of revenue creeps up month by month.

Check the materials line as a share of revenue every month. If it rises two months running with no change in job mix, update material prices or markups before the quarter closes. The article on job costing shows how to catch it at the level of individual jobs.

Reading the trend each month

A single month's gross margin says little. The trend over six to twelve months, broken down by its three main parts, says a lot. Put labor, materials and other job costs on separate lines, each as a share of revenue, and look at which one moved.

  • Labor share rising: check billable hours, overtime and callbacks before blaming wages. Lost hours usually cost more than raises.
  • Materials share rising: check supplier invoices against the price book, then look for jobs where materials were installed but not billed.
  • Other job costs rising: look for subcontracted excavation, equipment rental or disposal that was not quoted into the job.
  • All three flat but margin falling: revenue is the problem, usually discounting or a shift toward lower-margin work.

Ask your bookkeeper three questions each month: were any job costs posted to overhead accounts, was inventory counted or estimated, and were any large credits or refunds issued? The answers explain most surprises before you start changing prices.

Ways to raise gross margin

  • Recalculate the labor rate from loaded cost and real billable hours each year.
  • Cut unapplied time through better routing, parts staging and accurate job durations.
  • Track callbacks by job type and fix the causes; free return visits are pure margin loss.
  • Review material markups when supplier prices change, not on a fixed calendar.
  • Compare margin by department and decide whether a low-margin line of work earns its place.

Departments deserve their own view. Drain work often runs a high margin on low material use, replacements carry more equipment cost, and new construction usually runs the thinnest margin of all because bids are competitive and schedules slip. None of that is wrong in itself, but each department should cover its share of overhead. If one does not, either reprice it, change how it is staffed, or decide deliberately that it stays for strategic reasons, such as feeding service work later.

Gross margin then feeds revenue per technician and net profit: if gross profit does not cover overhead with room to spare, no amount of extra volume will fix the bottom line.

Frequently asked questions

What is a good gross margin for a plumbing company?

It depends on job mix. Residential service work usually carries a higher margin than new construction or large installs. Track your own margin by department and compare each with its own history rather than with one industry figure.

Is the technician's truck part of cost of goods sold?

It can be, but many service shops treat vehicles as overhead and recover them through the hourly rate. Either approach works if you apply it every month the same way.

Why does my gross margin swing so much month to month?

The usual causes are buying materials in bulk without adjusting for inventory, a few large replacement jobs, and coding differences in the books. Fix the inventory adjustment first.

References

  1. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics, via Federal Reserve Bank of St. Louis (FRED) (2026). Producer Price Index by Commodity: Metals and Metal Products: Copper and Brass Mill Shapes (WPU102502) (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ†‘

  4. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). Average hourly earnings of all employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822003) (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics, via Federal Reserve Bank of St. Louis (FRED) (2026). Producer Price Index by Commodity: Metals and Metal Products: Plumbing Fixtures and Fittings (WPU105) (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo