Metrics finance

How profitable is a plumbing business?

How profitable is a plumbing business? What public data shows, why owner pay distorts net profit, and the few drivers that decide the bottom line.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Three things owners mean by profit
  2. What public data can and cannot tell you
  3. Owner pay and the S corporation question
  4. Building the profit picture step by step
  5. Example: same revenue, different results
  6. The drivers that decide the bottom line
  7. Rising costs and staying power
  8. Where profit leaks in an ordinary month
  9. Questions to ask before trusting a benchmark
  10. A monthly profit habit
  11. Frequently asked questions
  12. References
Metrics finance: How profitable is a plumbing business?Article coverMETRICS FINANCEHow profitable is aplumbing business?Ava for PlumbersInsightsMetrics finance: How profitable is a plumbing business?Article coverMETRICS FINANCEHow profitable is aplumbing business?Ava for Plumbers

Key takeaways

  • Federal statistics report receipts and payroll for plumbing contractors, not profit, so treat any single "industry net margin" figure with caution.
  • Most firms are small: about 63% of plumbing, heating and AC contractor firms had receipts under $1 million in 2022[1].
  • Normalize owner pay before you judge profit; a shop that pays the owner nothing looks profitable on paper while it is underpaying its most important worker.
  • Profit comes from a short list of drivers: price against loaded labor cost, billable hours, callbacks, material control and overhead per truck.

Three things owners mean by profit

Ask five plumbing owners how profitable their business is and you will get answers measured in at least three different ways. Before comparing yourself with anyone, decide which of these you mean.

  • Gross profit: revenue minus the direct costs of doing jobs, such as field labor, materials, permits and subcontractors.
  • Operating or net profit: gross profit minus overhead, including office staff, rent, vehicles, insurance, marketing, software and a market salary for the owner.
  • Owner's take: everything the owner receives, including salary, distributions, a company truck and personal costs run through the business.

The third number is the one most owners feel, and it is the one that makes comparisons misleading. A business can produce a healthy owner's take while making no real operating profit, simply because the owner works sixty hours a week for a modest salary and does the estimating, dispatching and bookkeeping unpaid.

What public data can and cannot tell you

The Census Bureau's business statistics show the shape of the industry rather than its profits. In 2022, plumbing, heating and AC contractors averaged about $2.9 million in receipts per firm across 107,004 firms[2], but that average is pulled up by a small number of very large companies. About 63% of firms had receipts under $1 million, and about 28% had receipts between $1 million and $5 million[1].

Plumbing, heating and AC contractor firms by annual receipts, 2022Number of firms with employees; the top two groups are calculated from the same Census table
Plumbing, heating and AC contractor firms by annual receipts, 2022Bar chart. Under $100,000: 17,681 firms; $100,000 to $999,999: 50,040 firms; $1 million to $4.99 million: 29,692 firms; $5 million or more: 9,591 firms.Under $100,000Under $100,000: 17,681 firms17,681 firms$100,000 to $999,999$100,000 to $999,999: 50,040 firms50,040 firms$1 million to $4.99 million$1 million to $4.99 million: 29,692 firms29,692 firms$5 million or more$5 million or more: 9,591 firms9,591 firmsPlumbing, heating and AC contractor firms by annual receipts, 2022Bar chart. Under $100,000: 17,681 firms; $100,000 to $999,999: 50,040 firms; $1 million to $4.99 million: 29,692 firms; $5 million or more: 9,591 firms.Under $100,000Under $100,000: 17,681 firms17,681 firms$100,000 to $999,999$100,000 to $999,999: 50,040 firms50,040 firms$1 million to $4.99 million$1 million to $4.99 million: 29,692 firms29,692 firms$5 million or more$5 million or more: 9,591 firms9,591 firms

Source: U.S. Census Bureau, 2022[1]

Show the data
ItemValue
Under $100,00017,681 firms
$100,000 to $999,99950,040 firms
$1 million to $4.99 million29,692 firms
$5 million or more9,591 firms

These figures report revenue and payroll, not profit. Industry profit benchmarks you find online usually come from trade surveys, software vendors or consultants with self-selected samples. They can still be useful as a rough range, but check who answered, how they define net profit and whether owner pay was included before you set any target from them.

The more reliable comparison is with yourself: the same calculation, done the same way, every month for two or three years. That tells you whether the business is getting more profitable, which is the question that matters most.

Owner pay and the S corporation question

Many plumbing businesses are S corporations. In 2023, S corporations ran 76,190 of the 111,207 plumbing, heating and AC contractor establishments with paid employees, about 69%[3]. In an S corporation the owner usually takes a salary through payroll and the rest as distributions, which means the profit figure on the books depends partly on how large a salary the owner chose.

To compare years or compare yourself with another shop, replace whatever salary you actually took with a market wage for the jobs you do. If you run the field team and do the estimating, price what it would cost to hire a general manager and an estimator. Subtract that from operating profit. What remains is the profit the business earns as an asset, separate from the return on your own labor. Talk to your accountant before changing how you pay yourself; the tax treatment of salary and distributions has rules of its own.

Building the profit picture step by step

  1. Start with revenue

    Use invoiced revenue for the year, net of refunds and sales tax, split into service, replacement and construction if you can.

  2. Subtract direct costs

    Field labor at loaded cost, materials installed, permits, subcontractors and commissions. The result is gross profit.

  3. Subtract overhead

    Office and dispatch wages, rent, vehicles if not in direct costs, insurance, marketing, software, professional fees and interest.

  4. Normalize owner pay

    Replace the salary you took with a market wage for the roles you fill. Add back personal costs that run through the business.

  5. Read the result two ways

    As a percentage of revenue, to compare years, and in dollars, to compare with the risk you carry and the money tied up in trucks, stock and receivables.

Example: same revenue, different results

Example: two fictional shops each bill $1.6 million a year. On paper their owners take home similar amounts. Normalizing owner pay shows very different businesses.

Example profit comparison with fictional data
LineShop AShop B
Revenue$1,600,000$1,600,000
Gross profit$720,000$640,000
Overhead before owner pay$520,000$420,000
Owner salary actually taken$40,000$110,000
Market wage for owner roles$130,000$110,000
Normalized operating profit$70,000$110,000

Example, continued: Shop A has the better gross margin but carries heavy overhead and an owner who underpays himself to make the year look good. Shop B runs leaner and pays a market salary. If either owner wanted to sell or step back, Shop B is the business a buyer would pay more for.

The drivers that decide the bottom line

Profit drivers and a quick test for each
DriverWhy it mattersQuick test
Price versus loaded labor costSets the ceiling on gross marginHas the labor rate been recalculated this year?
Billable hoursUnbilled time is paid for anywayWhat share of paid field hours is on revenue jobs?
CallbacksFree return trips erase marginCallback rate by job type and technician
Material controlUnbilled parts and shrinkage leak marginDo truck counts match purchases?
Overhead per truckOffice cost has to be spread across field capacityOverhead divided by technicians, trend over two years
CollectionsProfit that is not collected is not profitShare of receivables over 60 days

Notice that volume is not on the list. More calls only add profit if each job already makes money after overhead. Shops that grow revenue without fixing these drivers often find that profit stays flat while stress rises. The guides to gross margin, job costing and revenue per technician cover the first three drivers in detail.

Rising costs and staying power

Costs are the main pressure on margins right now. In the Federal Reserve Banks' survey of small employer firms, 75% reported rising costs of goods, services or wages as a financial challenge, and among firms with financial challenges, 48% responded by raising prices[4]. Plumbing businesses that update prices once a year, or less, absorb cost increases for months before reacting.

Profit also buys staying power. Of construction establishments opened in March 2015, 57.5% were still operating five years later and 42.5% after ten years[5]. A business with a thin cushion has no margin for a slow winter, a lost technician or a large customer who pays late. That is why profit should be judged alongside cash flow, not only on the year-end statement.

Where profit leaks in an ordinary month

Profit rarely disappears in one dramatic loss. It leaks in small, repeated ways that each look too minor to chase. Walking through a normal month with the job list in hand usually turns up the same handful of leaks.

  • Parts used but never billed, especially on jobs closed in a hurry at the end of a long day.
  • Return visits logged as new jobs at no charge, so the original job's margin looks fine while the company pays twice.
  • Discounts given at the door without a reason code, which makes it impossible to tell goodwill from habit.
  • Overtime on routine work that could have been scheduled into the next day.
  • Trucks idling between distant jobs because the board was built by arrival order rather than geography.

None of these will show up on a year-end statement as a named line. They show up as a gross margin a few points lower than it should be and an owner who cannot explain why a busy year felt thin. A monthly look at margin by department, callbacks and discount codes catches most of them within weeks.

Questions to ask before trusting a benchmark

  • Who answered the survey, and how many shops of your size and type were in it?
  • Does the net profit figure include a market salary for the owner, or is it before owner pay?
  • Are residential service, new construction and commercial work mixed together?
  • Is the figure before or after interest, depreciation and taxes?
  • Which year is it from, and has the cost of labor and materials changed much since?

If the source cannot answer most of these, use the figure as a loose sanity check at most.

A monthly profit habit

  • Close the books by the tenth of the following month, with job costs coded consistently.
  • Review gross margin by department and overhead as a share of revenue, each against the last twelve months.
  • Recalculate normalized owner pay once a year, or whenever your role changes.
  • Revisit prices whenever labor or material costs move noticeably, not only in January.
  • Keep a short note of one-off items, such as a large insurance job or an equipment sale, so next year's comparison is honest.

If your bookkeeping is set up by department, most of this takes an hour a month. If it is not, setting it up properly, for example with a chart of accounts built around service, drain and replacement work, is the first job. The guide on connecting field software to your accounting explains how to stop retyping invoices.

Frequently asked questions

What is a typical net profit margin for a plumbing company?

There is no official federal benchmark for plumbing net margins. Private surveys publish ranges, but definitions differ, especially around owner pay. Compare your own normalized operating profit year over year first.

Does owner salary count as an expense when calculating profit?

For a fair picture, yes. Include a market wage for the roles the owner fills, then treat anything above that as the business's profit.

Why is my business profitable but always short of cash?

Profit and cash differ because of receivables, inventory, loan principal and equipment purchases. A profitable shop with slow-paying customers or heavy truck stock can still run short each month.

References

  1. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: Firms by industry and enterprise receipts size (opens in a new tab) โ†‘

  2. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  3. U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) โ†‘

  4. Federal Reserve Banks (2025). 2025 Report on Employer Firms: Findings from the 2024 Small Business Credit Survey (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics (2015-2025). Business Employment Dynamics: Establishment survival, Construction (Table 7) (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo