Licensing compliance

EPA lead-safe rules for plumbers in older homes

When EPA's lead-safe renovation rule applies to plumbers cutting walls in pre-1978 homes, the 6 and 20 square foot limits, and the job steps.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why a plumbing company is a renovation firm under this rule
  2. The minor repair exemption, read carefully
  3. Practices that are banned or restricted
  4. What a covered job requires on site
  5. Decide on the phone, not in the driveway
  6. Certification and paperwork
  7. Pricing and explaining lead-safe work
  8. Two examples from the field
  9. Frequently asked questions
  10. References
Licensing compliance: EPA lead-safe rules for plumbers in older homesArticle coverLICENSING COMPLIANCEEPA lead-safe rules forplumbers in older homesAva for PlumbersInsightsLicensing compliance: EPA lead-safe rules for plumbers in older homesArticle coverLICENSING COMPLIANCEEPA lead-safe rulesfor plumbers in olderhomesAva for Plumbers

Key takeaways

  • The RRP rule covers paid work that disturbs painted surfaces in homes, child care facilities and preschools built before 1978.
  • Small jobs are exempt only if they disturb 6 square feet or less of paint per room inside, or 20 square feet or less outside, without prohibited practices or window replacement.
  • Jobs in the same room within 30 days count together, so a series of small openings can add up to a covered renovation.
  • Firms need certification and workers need lead-safe training; open-flame burning of painted surfaces is banned outright.

Why a plumbing company is a renovation firm under this rule

Most plumbers do not think of themselves as renovators. EPA does, whenever the job disturbs paint. The Renovation, Repair and Painting rule, usually called RRP, applies to work in homes, child care facilities and preschools built before 1978, and it requires anyone paid to disturb painted surfaces there to be certified and their employees trained in lead-safe work practices[1]. Cutting into a plaster wall to reach a leaking drain, opening a ceiling under a bathroom, or removing painted trim to reroute a supply line all count.

The rule defines renovation broadly, as the modification of any existing structure or part of one that results in disturbing painted surfaces[2]. There is no special carve-out for plumbing, HVAC or electrical trades. The question is never 'is this a remodel?' but 'will we disturb paint, how much, and how?'

Lead matters because there is no safe level of exposure, and EPA sets the health goal for lead in drinking water at zero[3]. Dust from old paint is one of the main ways children are exposed in older homes, which is why the rule focuses on dust control and cleanup rather than on the paint itself.

The minor repair exemption, read carefully

The rule exempts minor repair and maintenance, and that is where most service calls fall. The exemption has four conditions, and all of them must be met[2].

  1. Inside, the work disturbs 6 square feet or less of painted surface per room.
  2. Outside, the work disturbs 20 square feet or less of painted surface.
  3. None of the prohibited or restricted work practices are used.
  4. The work does not involve window replacement or demolition of painted surface areas.
Painted area you can disturb under the minor repair exemptionApplies only if no prohibited practices, window replacement or demolition are involved.
Painted area you can disturb under the minor repair exemptionComparison. Interior, per room: 6 square feet; Exterior: 20 square feet.6 square feetInterior, per roomInterior, per room: 6 square feet20 square feetExteriorExterior: 20 square feetPainted area you can disturb under the minor repair exemptionComparison. Interior, per room: 6 square feet; Exterior: 20 square feet.6 square feetInterior, per roomInterior, per room: 6 square feet20 square feetExteriorExterior: 20 square feet

Source: Legal Information Institute, Cornell Law School (Code of Federal Regulations), 2026[2]

Show the data
ItemValue
Interior, per room6 square feet
Exterior20 square feet

Two details trip companies up. First, the 6 square foot limit is per room, measured as the painted area you actually disturb, including the area around your cut that gets chipped or scraped. A 2 by 3 foot access hole sits right at the limit, and a ragged plaster cut can easily exceed it. Second, jobs other than emergency renovations performed in the same room within the same 30 days are added together[2]. If you open a small access hole on Monday and return two weeks later to open another for the finish plumber, you may be over the limit for that room.

Practices that are banned or restricted

Using any of the restricted practices disqualifies a job from the minor repair exemption, and on covered jobs they are not allowed at all[4].

  • Open-flame burning or torching of painted surfaces is prohibited. When you sweat copper near painted trim or framing in an older house, shield the surface so the torch never burns paint.
  • High-speed machines that remove paint, such as sanders, grinders, power planers, needle guns and abrasive blasters, are prohibited on painted surfaces unless they have a shroud or containment system with a HEPA vacuum attachment collecting dust at the source.
  • Heat guns are allowed on painted surfaces only below 1,100 degrees Fahrenheit[4].

For plumbers the practical change is the cutting tool. An oscillating tool or rotary saw cutting through painted plaster creates exactly the fine dust the rule is aimed at. Fit a shroud with a HEPA vacuum, or score and cut by hand where you can.

What a covered job requires on site

When a job is covered, the rule sets out how the work area is marked, contained and cleaned[4]. The basics are simple enough to build into a standard kit for every older-home job.

  1. Post warning signs

    Before you start, post signs that define the work area and tell occupants to stay out.

  2. Contain the area

    Inside, cover the floor, including carpet, with taped-down plastic sheeting that extends 6 feet beyond the surfaces being worked on, or farther if needed to contain the dust. Close and cover doors and ducts in the work area.

  3. Work wet and shrouded

    Mist surfaces before scraping, use shrouded tools with HEPA collection, and keep debris on the plastic.

  4. Bag the debris

    Collect all paint chips and debris without spreading them and seal them in heavy-duty bags.

  5. Clean top to bottom

    Clean walls from the ceiling down with a HEPA vacuum or a damp cloth, then HEPA vacuum all remaining surfaces and objects in the work area before the final wet wipe.

  6. Verify and record

    A certified renovator performs the cleaning verification and the firm keeps records of the job.

Keep a lead-safe kit on any van that works older housing: plastic sheeting, tape, signs, a HEPA vacuum, a shrouded cutting tool, disposable coveralls, heavy-duty bags and wipes.

Decide on the phone, not in the driveway

The cheapest place to manage RRP is the booking call. If the person booking knows the house was built before 1978 and the job may involve opening a wall, they can send a certified tech with the right kit and put the containment time into the estimate. Add three questions to your intake for any job that may involve cutting drywall, plaster or painted surfaces.

RRP intake questions for jobs in older homes.
Intake questionIf the answer is yesIf unsure
Was the home built before 1978?Flag the job as possible RRPCheck the county property record before the visit
Will we need to open a wall, ceiling or painted trim?Estimate the painted area per roomAssume yes for hidden leaks and drain replacements
Does a child under six live in or regularly visit the home, or is it a child care facility?Plan full lead-safe practicesAsk directly and note the answer
Have we or anyone else opened walls in this room in the last 30 days?Add the areas togetherAsk the customer and check job history

Certification and paperwork

The rule has two layers. The firm itself must be certified by EPA or an authorized state, and at least one certified renovator must direct the work on each covered job, with other workers trained in lead-safe practices[1]. Renovator certification comes from an accredited training course, and refreshers are needed to keep it current. Some states run their own programs under EPA authorization, so check whether your state or EPA issues your certification.

Paperwork is where enforcement often lands, because it is easy to check after the fact. Keep, for each covered job, the pre-renovation education record given to the occupant, a record of who the certified renovator was, and the cleaning verification. File them with the work order so they can be found years later.

Pricing and explaining lead-safe work

Lead-safe work takes longer, and the customer should see why before the job starts, not on the invoice. Containment, shrouded tools, careful cleanup and the records add real time to a job that would otherwise be a quick access cut. Build a standard lead-safe add-on into your price book with a clear description, so every estimator quotes it the same way and nobody is tempted to skip it to win the job.

Explain it in plain terms. A short script works: 'Your home was built before 1978, so the paint in this wall may contain lead. Federal rules require us to set up plastic, use dust-collecting tools and clean with special vacuums when we open an area this size. It keeps the dust out of the rest of your home, especially if children live here or visit.' Most customers appreciate the care once they understand it.

Do not over-claim. You are not testing for lead unless you use an approved test kit or a certified inspector, and you should not tell customers that their paint is or is not lead-based without one. Treat pre-1978 paint as if it contains lead, follow the rule, and let the records show that you did.

Two examples from the field

Example one: a tech is called to a 1958 house for a slow leak behind a painted plaster bathroom wall. He cuts a 12 by 18 inch access panel, which is 1.5 square feet, using a scoring knife and a shrouded oscillating tool with a HEPA vacuum, and repairs the fitting. No restricted practices, well under 6 square feet, no other work in that room this month. The job fits the minor repair exemption, and he still lays plastic and cleans up carefully because it is good practice.

Example two: a week later the same customer books a vanity and shower valve replacement that requires opening a 4 by 3 foot section of the same wall. The new opening alone is 12 square feet, and it falls within 30 days of the first. This job is covered. The office schedules a certified renovator, adds containment time to the quote, and gives the homeowner the lead hazard pamphlet before work starts.

The same houses often have lead or galvanized service lines and old solder. If you are doing utility replacement work, remember that interior work at the foundation entry may disturb paint too. For dust from cutting concrete, see the separate rules on silica.

Frequently asked questions

Does the RRP rule apply to a plumber fixing a leak behind a wall?

It can. If the home was built before 1978 and you disturb more than 6 square feet of painted surface in a room, or use a prohibited practice, the job is covered. Small openings that meet all minor repair conditions are exempt.

Do separate small jobs in the same room count together?

Yes. Jobs other than emergency renovations performed in the same room within 30 days are counted together for the minor repair limits.

Can I use a torch near painted surfaces?

Open-flame burning or torching of painted surfaces is prohibited. Soldering is not banned, but shield painted surfaces so the flame does not burn the paint.

Who needs to be certified, the company or the tech?

Both layers apply. The firm must be certified, a certified renovator must direct each covered job, and other workers must be trained in lead-safe work practices.

References

  1. U.S. Environmental Protection Agency (2026). Lead Renovation, Repair and Painting Program (opens in a new tab) โ†‘

  2. Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 40 CFR 745.83 - Definitions (Residential Property Renovation) (opens in a new tab) โ†‘

  3. U.S. Environmental Protection Agency (2026). Basic Information about Lead in Drinking Water (opens in a new tab) โ†‘

  4. Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 40 CFR 745.85 - Work practice standards (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo