Key takeaways
- Continuing education rules are set by state boards and sometimes local jurisdictions; check each license your techs hold.
- Texas, for example, requires 6 hours of continuing professional education before renewing master, journeyman and tradesman-limited licenses, and 2 hours every three years for medical gas endorsements[1].
- The legal minimum is tiny next to the roughly 2,000 hours of on-the-job training an apprentice gets each year, so treat CE as a floor, not a plan[2].
- Budget training per tech as paid hours plus fees; private employers paid an average $46.89 per hour worked in total compensation in June 2026[3].
- Track every license, endorsement and renewal date in one place; a lapsed license can stop a tech from working.
How continuing education rules work
There is no national plumbing license, so there is no national continuing education rule. Licensing is set by states and, in some places, by cities or counties, and each sets its own renewal cycle, hour requirements and approved course providers. Some jurisdictions require a fixed number of hours every renewal; some require specific subjects such as code updates or law and rules; some have no CE requirement at all.
Texas is a useful example of how specific the rules can be. The Texas State Board of Plumbing Examiners says license holders must complete 6 hours of continuing professional education before they may renew, and it lists master plumber (with or without the responsible master plumber designation), journeyman plumber, tradesman plumber-limited and apprentice registrations with endorsements[1]. Apprentices are only required to take the 6 hours if they hold an endorsement, and medical gas endorsement holders must take 2 hours every three years[1].
Check the board's own website for each state and locality where your techs are licensed, and confirm that a course is from an approved provider before paying for it. Hours from an unapproved provider may not count.
Find the rules for your team
List every license and endorsement
For each tech, record license type, number, issuing state or city, expiration date and any endorsements such as medical gas, backflow testing, water treatment or gas fitting.
Look up each requirement
From the issuing board's website, note required hours, required topics, renewal cycle and whether online courses count.
Check local add-ons
Some cities and counties license separately or require their own registration. Note those renewals too.
Choose approved providers
Use the board's provider list. Trade associations, supply houses and manufacturers often offer approved classes.
Put renewals on a shared calendar
Set reminders 90 and 30 days before each expiration, owned by the office, not just the tech.
The minimum is not a training plan
Required CE hours keep a license active. They do not make a good technician. BLS says apprentices typically receive about 2,000 hours of paid on-the-job training a year, plus technical instruction in safety, local codes and regulations and blueprint reading[2]. A few hours of CE before renewal is a small fraction of the learning a tech needs to keep up with new equipment, code changes and customer expectations.
Source: U.S. Bureau of Labor Statistics, 2025[2]
Show the data
| Item | Value |
|---|---|
| Apprentice paid on-the-job training per year (typical) | 2,000 hours |
| Texas CPE required before each license renewal | 6 hours |
Skills also drive pay. O*NET's national data show plumbers earning about $21.22 an hour at the 10th percentile and $52.13 at the 90th[4]. Much of that spread reflects what a tech can do alone: diagnose, install specialty equipment, run commercial work. A training budget is how you move techs up that range inside your company instead of watching them do it elsewhere.
Building a training budget per tech
Budget training as two parts: the cost of the hours and the cost of the courses. The hours are usually the bigger part, because paid time in class is time not billed. Private employers paid an average of $46.89 per hour worked in total compensation in June 2026[3]; use your own loaded rate for each tech.
| Budget line | What it covers | Example yearly amount per tech |
|---|---|---|
| Required CE | Approved hours to renew licenses, at loaded wage plus course fees | Example: 6 hours plus fees |
| Code update class | New code adoptions in your jurisdiction | Example: one day every code cycle |
| Manufacturer training | Tankless and high-efficiency water heaters, fixtures, press systems | Example: one or two sessions |
| Specialty certification | Backflow testing, medical gas, drain camera and locating | Example: one certification for selected techs |
| Safety | Confined spaces, trenching, silica, ladder and vehicle safety | Example: quarterly toolbox talks |
| Customer skills | Explaining options, presenting quotes, handling complaints | Example: two coaching sessions |
Example: a tech with a loaded rate of $55 an hour who spends 30 hours a year in paid training costs $1,650 in time, before course fees. Multiply by the team and compare with what one stronger tech is worth in revenue, callbacks avoided and customers kept.
Topics worth paying for
- Code updates whenever your state or city adopts a new edition; inspection failures are expensive.
- Lead service line replacement and lead-safe work. EPA's Lead and Copper Rule Improvements, issued in October 2024, require drinking water systems to identify and replace lead pipes within 10 years, which will create steady replacement work in many areas[5].
- Water heater technology, including tankless, heat pump and high-efficiency gas units.
- Backflow prevention and testing, often a separate certification and a recurring revenue line.
- Drain diagnostics: cameras, locators and jetting.
- Safety, especially for apprentices and new hires.
- Customer communication, quoting and handling objections, which affect revenue as much as technical skill.
Matching training to each tech
Spreading the same courses across everyone wastes budget. Match training to where each tech is on the ladder and where the business is going.
- Apprentices and helpers: safety, basic code, joining methods and the classroom hours their apprenticeship requires.
- Newly licensed techs: diagnosis, water heater platforms you install most and customer communication.
- Senior techs: specialty certifications that open new services, such as backflow testing or medical gas, and mentoring skills.
- Leads and service managers: leadership, scheduling and coaching, so they can teach others.
- Office staff: the basics of what techs do, so CSRs book and describe jobs correctly.
Making training stick
Training that is not used within a few weeks fades. After every course, ask the tech for a five-minute summary at the next morning meeting and one change they will make on the job. Schedule a job that uses the new skill soon after the class, with a senior tech present if needed. For manufacturer training, add the key steps to your procedures and job checklists. Review in the next ride-along or call review whether the change actually happened.
Paying for training fairly
Pay for required CE and the time spent in it. It protects the company's license coverage as much as the tech's. For larger investments, such as a specialty certification or exam prep, some shops use a written payback agreement where the tech repays a declining share of the cost if they leave within a set period. Keep these reasonable, put them in writing before the course and check your state's rules on deductions and final pay; a payback deduction cannot cut pay below minimum wage.
Tie training to the pay ladder. A tech who completes a certification and uses it on the job should see it reflected in pay or commission rates. Otherwise the certificate becomes a line on a resume for the next employer.
When a license is about to lapse
If a renewal date is close and the hours are not done, act the same day. Book the next available approved course, online if the board accepts it, and move the tech's schedule to make room. Ask the board what happens if the license expires and how reinstatement works, and plan dispatch around it: a tech without an active license should not be sent on licensed work.
Track it in one place
Keep a single tracker for licenses, endorsements, CE hours, certificates and renewal dates, owned by the office manager. Store copies of completion certificates, because boards can audit CE. Review it monthly in the same meeting where you review the schedule; a tech whose license lapses cannot legally do licensed work, and that becomes a dispatch problem overnight.
Example: a five-tech shop's year
Example (fictional): a five-tech shop in Texas tracks seven licenses and two medical gas endorsements. The office books approved 6-hour CPE classes for each license holder two months before renewal, and schedules the medical gas class for the two endorsement holders in the third year of their cycle. Each tech also chooses one skill course: two pick tankless water heater training, one backflow certification, one drain camera training and one a customer communication workshop.
Example (fictional) results: no lapsed licenses, a new backflow testing service and fewer callbacks on tankless installs. The owner records each course in the training library so others can learn from it, and links the courses to the standard operating procedures they changed. For licensing rules in Texas specifically, see our Texas plumbing license guide.
Frequently asked questions
How many CE hours do plumbers need?
It depends on the state and license. Texas requires 6 hours of continuing professional education before renewing master, journeyman and tradesman-limited licenses, and 2 hours every three years for medical gas endorsements. Check your own board's rules.
Should the company pay for plumbers' continuing education?
Yes for required CE and the time spent in it, since licenses protect the company too. Larger investments can use a reasonable written payback agreement, subject to state rules.
How much should a plumbing company budget for training?
Budget paid training hours at each tech's loaded rate plus course fees. Required CE is a small part; code updates, manufacturer training, certifications, safety and customer skills make up most of a useful budget.
References
Texas State Board of Plumbing Examiners (2026). Training and Education: Continuing Professional Education (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2026). Employer Costs for Employee Compensation - June 2026 (opens in a new tab) โ
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 47-2152.00 - Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Environmental Protection Agency (2024). Lead and Copper Rule Improvements (opens in a new tab) โ