Key takeaways
- About 58% of plumbing, heating and AC contractor establishments had fewer than five employees in 2023, so in most shops the procedures live in the owner's head[1].
- Document first the processes that are frequent, risky or done differently by every person: call intake, water heater installs, gas and safety calls, quoting and job close-out.
- Use a one-page template: purpose, when it applies, steps, safety, quality checks and records.
- Build code and health rules into the steps, such as using only lead-free materials as federal law defines them[2].
- Test each SOP with a new hire, train it, audit it on real jobs and revise it.
Why small plumbing companies need SOPs
Most plumbing companies are small. In 2023, 64,871 of 111,207 plumbing, heating and air-conditioning contractor establishments, about 58%, had fewer than five employees, and about 89% had fewer than 20[1]. In a shop that size, the owner is the procedure manual. That works until the owner wants a day off, the business adds a second crew or a new CSR books a gas leak for next Tuesday.
Standard operating procedures, or SOPs, write down how your company does its most important work, so it is done the same way whoever is on shift. They make training faster, reduce callbacks and give you something to point to when a customer, inspector or insurer asks how you handle a situation.
Which processes to document first
Do not try to write a full operations manual in one go. Score each process on three questions: how often it happens, how bad a mistake would be and how differently your people do it today. Start with the ones that score high on two or three.
| Process | Why it comes first |
|---|---|
| Inbound call intake and emergency triage | Every job starts here; wrong triage sends a tech too late or to the wrong job |
| Gas smell and other safety calls | Rare but high risk; must be identical every time |
| Tank water heater replacement | Frequent, code-sensitive and a common callback source |
| Drain clearing and camera inspection | Frequent; quality and recommendations vary by tech |
| Quoting and presenting options | Directly drives revenue and complaints |
| Job close-out: photos, notes, payment, cleanup | Affects reviews, collections and warranty claims |
| Truck stock and restocking | Missing parts cause return trips |
| Injury or near-miss reporting | Required follow-up and a safety culture signal |
Safety-related procedures earn a place early even if they are rare. Specialty trade contractors recorded 2.3 recordable injury and illness cases per 100 full-time workers in 2024[3]; a written procedure for confined spaces, ladders and hot work is cheaper than one incident.
A one-page SOP template
- Title and version: the process name, version number and date.
- Purpose: one sentence on why this procedure exists.
- When it applies: the situations it covers and any it does not.
- Owner: the person responsible for keeping it current.
- Tools, parts and documents needed: what to have before starting.
- Steps: numbered, verb first, one action per step.
- Safety: hazards and required precautions, placed at the step where they apply.
- Quality checks: how the person confirms the work is right before leaving.
- Records: photos, notes, forms or readings to capture in the job file.
- Related items: links to training videos, checklists and other SOPs.
Keep each SOP to one page if you can, two at most. If a procedure needs more, it is probably two procedures. Write in plain language, add photos of what good looks like and store SOPs where techs can open them on a phone in the field.
Sample: tank water heater replacement
Here is how the template looks for a common job. Adapt the details to your local code, the equipment you install and your manufacturers' instructions.
Confirm the job
Check the work order: fuel type, capacity, location, venting and access. Confirm permit requirements for the jurisdiction and pull the permit if required.
Protect the home
Put down floor protection and shoe covers. Photograph the existing installation, including venting, gas or electrical connections and any code issues.
Shut down safely
Turn off gas or power and the cold water supply. For gas units, confirm the gas is off at the appliance valve before disconnecting. Drain the tank to a safe location.
Use compliant materials
Use only pipes, fittings, fixtures, solder and flux that meet the federal lead free definition: a weighted average of 0.25% lead across wetted surfaces, and 0.2% lead for solder and flux[2].
Install to code
Set the new heater, connect water, gas or power and venting per manufacturer instructions and local code, including expansion tank, relief valve discharge, seismic strapping and drain pan where required.
Set and test
Fill, purge air, check for leaks, light or power the unit and test venting and draft for gas units. Set the temperature according to manufacturer instructions, code and the customer's needs, and explain it. CDC notes Legionella bacteria grow in building water systems at 77 to 113 F[4], which is one reason not to set heaters too low; a mixing valve addresses scald risk at higher settings.
Close out
Take after photos, record model and serial numbers, explain operation and warranty to the customer, haul away the old unit and collect payment or a signature.
Office SOPs matter as much as field SOPs
Many callbacks and bad reviews start in the office: a job booked with the wrong address, an emergency booked for tomorrow, a quote sent without the options the tech discussed. Preparing cost estimates is one of the core duties BLS lists for plumbers[5], and it deserves an SOP that covers both the tech's part and the office's follow-up.
- Call intake: greeting, emergency questions, contact details read back, booking window and confirmation text.
- Quote follow-up: who sends it, how fast, how many follow-ups and when to close it out.
- Dispatch changes: how a tech is told about a change and how the customer is updated.
- Invoicing and collections: what is checked before an invoice goes out and what happens when payment is late.
Writing SOPs your team will use
Watch, then write
Ride along or sit with the person who does the process best and write down what they actually do. Then draft the SOP.
Test with a new person
Give the draft to someone who has not done the process and watch them follow it. Every place they hesitate needs a clearer step.
Train it
Walk the team through the SOP at a meeting, show the related training video and explain why each safety step is there.
Audit it on real jobs
Check a few jobs a month against the SOP using photos and notes. Look for steps that are always skipped; either they are unnecessary or they need more training.
Revise it
Update the SOP after audits, callbacks, code changes or new equipment, and bump the version number.
Pair SOPs with short videos from your training library and teach new leads to own them; see promoting a tech to lead or service manager. Procedures also help keep continuing education from fading once the class ends.
Where SOPs should live
An SOP is only useful if the tech can find it in the middle of a job. Keep the master copies in one shared place with the same structure as your training library, accessible from techs' phones, and link the relevant SOP from job types in your field software where possible. Print laminated versions of the few safety SOPs, such as gas smell response, for every truck. Keep older versions in an archive folder rather than deleting them, so you can see what the rule was at the time of a past job.
Mistakes when writing SOPs
- Writing what should happen instead of what the best person actually does.
- Long paragraphs instead of numbered steps.
- Leaving out the reason for a step, which is the first thing people skip when busy.
- Writing SOPs nobody owns, so they go out of date within a year.
- Copying a generic template from the internet without changing it to fit your equipment, code and customers.
Example: five SOPs in a quarter
Example (fictional): the owner of a seven-person shop wants to take a two-week vacation without the phone ringing. In one quarter, she writes five SOPs: call intake and triage, gas smell response, tank water heater replacement, drain clearing with camera inspection and job close-out. A new CSR and a second-year apprentice test each draft.
Example (fictional) results: the vacation goes ahead with two calls to the owner instead of daily ones. Water heater callbacks drop because the close-out step now requires photos of the relief valve discharge and venting. The next quarter's list covers quoting, truck restocking and injury reporting.
Frequently asked questions
What SOPs does a plumbing company need?
Start with call intake and emergency triage, gas and safety calls, your most common install (often tank water heaters), drain clearing, quoting and job close-out. Add truck stock, injury reporting and office processes next.
How long should an SOP be?
One page if possible, two at most, with numbered steps, safety notes where they apply, quality checks and the records to capture.
How do I get techs to follow SOPs?
Write them with the people who do the work, test them with a new hire, train them at team meetings, audit real jobs with photos and notes, and update them when something changes.
References
U.S. Census Bureau (2023). County Business Patterns 2023, U.S. national file (cbp23us) (opens in a new tab) โ
U.S. Environmental Protection Agency (2026). Use of Lead Free Pipes, Fittings, Fixtures, Solder and Flux for Drinking Water (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2024). Industries at a Glance: Specialty Trade Contractors (NAICS 238) (opens in a new tab) โ
Centers for Disease Control and Prevention (2026). Causes and How Legionella Spreads (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ