Key takeaways
- Set delay thresholds in advance so nobody has to decide on the spot whether a delay is worth a call.
- Text first from the number the customer already knows, then call when the customer has a decision to make.
- Give a new time, a reason in one line and a choice; never just say 'running behind'.
- Late arrivals are review material: 54% of review readers pay more attention to extremely negative reviews[1].
Late is forgivable; silence is not
Every plumbing shop runs late sometimes. A water heater fights back, a slab leak turns out to be two, a supply house line is long. Customers know this. What they do not forgive is waiting at home with no word, having taken time off work, while the window ticks past.
BLS lists communication as a key quality for plumbers because they talk to customers regularly[2]. For the office, the most frequent test of that skill is the late call. Getting it right is mostly about deciding the rules before the day starts, so the CSR or dispatcher is not improvising at 2:40 p.m. with three other lines ringing.
It also protects your reputation. Pew found 82% of US adults at least sometimes read online ratings or reviews before buying something for the first time[1], and review readers weigh the negative ones more heavily.
Source: Pew Research Center, 2016[1]
Show the data
| Review type | Pay more attention (%) |
|---|---|
| Extremely negative reviews | 54% |
| Extremely positive reviews | 43% |
Delay thresholds: when to say what
Measure delay against the start of the promised window, not against the tech's own estimate. Then match each band to an owner and a channel.
| Expected arrival vs window | Who contacts | Channel | What the message does |
|---|---|---|---|
| Inside the window | Nobody extra | Normal on-my-way text | Confirms name and ETA |
| Up to 30 min after the window opens | Dispatcher or CSR | Text | New ETA, one-line reason, reply option |
| 30 to 60 min late | Dispatcher | Text, then call if no reply | New ETA and a choice: wait or rebook |
| More than 60 min or unknown | Dispatcher or office manager | Call first | Honest picture, rebook offer with priority |
| Tech will not make it today | Office manager | Call before the window opens | Apology, firm new slot, a gesture you choose in advance |
Two rules make the table work. The dispatcher, not the tech, sends the message, because a tech on a job should keep working and should not be typing while driving. And the first message goes out as soon as dispatch can see the delay coming, which usually means when the previous job passes its booked slot.
Templates you can paste
Swap in your own business and staff names; the ones below are placeholders.
- Short delay (text): 'Hi Maria, this is Lakeside Plumbing. Your plumber, Dev, is finishing a job that ran long. New arrival time is about 2:40. Reply 1 if that works or 2 and we will call you.'
- Longer delay (text then call): 'Hi Maria, Dev is still on an urgent leak and won't reach you before 3:30. Would you like to keep today, or take the first slot tomorrow at 8? Either way we will hold it for you.'
- Phone version: 'I'm calling before your window starts because I would rather you hear it from me. Dev is held up on a leak repair. I can get him to you by about 3:30, or I can book you first thing tomorrow. Which is easier for you?'
- Cannot make it today: 'I'm sorry, we are not going to make it today. I have the 8 a.m. slot tomorrow held for you, and I've noted that you're first on Dev's list.'
- After the visit (optional): 'Thanks for your patience today, Maria. If anything about the repair isn't right, reply here and we'll sort it out.'
Never send 'running behind' on its own. Every late message carries a time, a short reason and something the customer can choose.
Text or call?
Lead with a text, sent from the same business number the customer already has. People screen calls: in Pew's survey, eight in ten Americans said they generally do not answer a cellphone call from an unknown number[3], and 67% said they let it go to voicemail and check whether a message was left[3]. A text lands even when a call would be ignored.
Use the same business number for every customer message, so a late text arrives in the same thread as the booking confirmation and the on-my-way text. Customers trust a thread they recognize, and your staff can see the history before they reply. If several people send messages, sign each one with a first name so the customer knows a person is behind it.
Smartphones are close to universal, at 91% of US adults[4], so a text with a reply option is the lowest-effort way for most customers to answer. Switch to a call when the customer has a real decision to make, when they have not replied, or when the job is an emergency they are anxious about. If the call goes to voicemail, leave a short message with the new time and say a text is on its way.
What to offer when the delay is long
Decide your offers before the season starts and write them into the dispatcher's notes, so the gesture is consistent and approved:
- The first slot of the next day, held and confirmed in writing.
- A narrower window next time, such as a first-call arrival.
- A waived trip or diagnostic charge, if you have one and the delay was yours.
- A different tech today, only if the replacement is qualified for the job.
- A follow-up call from the office manager for anyone who was let down twice.
Avoid offering discounts on the repair itself in the heat of the moment; it trains customers to complain and makes pricing inconsistent. For callers who are already angry, the steps in de-escalating angry callers apply.
Example: one afternoon window at risk
Example (fictional): at 1:20 p.m. the dispatcher sees that the morning water heater job is past its booked four hours. The next customer has a 2 to 4 p.m. window, 25 minutes away. Under the delay bands, the job is heading for the 30-to-60-minute band, so at 1:25 the dispatcher texts the new ETA and a choice.
Example, continued: the customer replies 1 and keeps the slot. At 2:50 the tech is on the way and the regular on-my-way text goes out with his photo. Total office time spent: about three minutes. The same delay handled with silence would have produced a 'where is the plumber?' call at 2:30, a rushed guess at an ETA and, quite possibly, a one-star review.
Who owns the late list
Delays slip through when everyone assumes someone else has told the customer. Give one person, usually the dispatcher, ownership of a simple late list for the day: every job currently past its booked slot, every customer whose window is now at risk, and whether each has been contacted. The list can be a filter on the dispatch board or a column on a whiteboard. What matters is that someone checks it every half hour through the afternoon.
Techs feed the list. Agree on one trigger: as soon as a tech can see a job will run more than fifteen minutes over, they send dispatch a one-word status or tap a button in the field app. Dispatch does the rest. Techs should never be the ones negotiating new times with the next customer while standing in the current customer's kitchen.
At the end of the day, the late list becomes the reason-code log. Five minutes of review at the morning huddle is enough to spot a pattern before it becomes a habit.
Mistakes that make a delay worse
- Giving a new ETA nobody has checked. A second missed time is far worse than the first.
- Blaming the previous customer by name or detail. 'A job ran long' is enough.
- Waiting until the window has closed to say anything.
- Calling from a tech's personal cell, which the customer will not recognize and may not answer.
- Promising the same tech tomorrow without checking the board.
- Letting a cheerful automated reminder go out for a visit you already know will be late.
Fix the cause, not just the message
Late messages treat the symptom. Track every late arrival with a reason code (job overran, emergency inserted, traffic, parts run, late start) and review the list monthly. Most shops find one or two causes dominate. Overruns point to job duration estimates that need updating; inserted emergencies point to a missing floating truck; long drives point to the zone plan.
Once the causes are under control, the late message becomes rare, and the routine on-my-way text does most of the communication work.
Frequently asked questions
How late is too late before calling a plumbing customer?
Set a rule in advance. A common one is a text as soon as the arrival will slip past the start of the window, and a phone call once the delay passes about 30 minutes or the customer has not replied.
Should the technician call the customer when running late?
Usually not. The dispatcher or CSR should send the update so the tech can keep working and is never typing while driving. The tech's job is to tell dispatch early when a job is overrunning.
What should a running-late text say?
The customer's name, the business name, the tech's name, a new arrival time, a one-line reason and a simple way to reply, such as 1 to keep the slot or 2 to talk.
Should we offer a discount when we are late?
Pick your gestures in advance, such as a held first slot tomorrow or a waived trip charge when the delay was yours. Ad hoc discounts on the repair make pricing inconsistent.
References
Pew Research Center (2016). Online Reviews (Online Shopping and E-Commerce) (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
Pew Research Center (2020). Most Americans don't answer cellphone calls from unknown numbers (opens in a new tab) โ
Pew Research Center (2026). Mobile Fact Sheet (opens in a new tab) โ