Call handling

Switching answering services without dropping calls

Change answering services without a night uncovered: overlap period, forwarding cutover, number ports, scripts, test calls and two weeks of checks.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing8 min read

On this page
  1. Where switches go wrong
  2. List everything that is moving
  3. Build in an overlap
  4. Pick the cutover moment
  5. Moving a number the old service controls
  6. Rewrite the scripts and run test calls
  7. Cutover day, step by step
  8. The first two weeks
  9. If the new cover is an SI Employee
  10. Frequently asked questions
  11. References
Call handling: Switching answering services without dropping calls1 business day: FCC limit for completing a simple number port; non-simple ports get four business daysCALL HANDLINGSwitching answering serviceswithout dropping calls1 business dayFCC limit for completing asimple number port; non-simpleports get four business daysAva for PlumbersInsightsCall handling: Switching answering services without dropping calls1 business day: FCC limit for completing a simple number port; non-simple ports get four business daysCALL HANDLINGSwitching answeringservices withoutdropping calls1 business dayFCC limit for completing a simplenumber port; non-simple ports get fourbusiness daysAva for Plumbers
Figure source: Legal Information Institute, Cornell Law School (Code of Federal Regulations), 2026[1]

Key takeaways

  • Never end the old service before the new one is answering; the FCC gives the same advice for changing phone companies[2].
  • Cut over on a weekday morning with the office fully staffed, not on a Friday, before a holiday or in a forecast freeze.
  • If the old service holds a number on your listings, start the port early: simple ports take one business day, non-simple ones up to four[1].
  • Run eight test calls before go-live, then review every call against its recording for the first week.

Where switches go wrong

Answering-service switches rarely fail on the new provider's first good call. They fail in the gap: the old contract ends on the 1st, the new service is still learning the scripts, the forwarding on one line was never changed, and the first freeze night of the season lands in between.

Plumbing makes that gap expensive. BLS notes that plumbers are often on call for emergencies, so evening and weekend work is common[3], which means the calls that matter most arrive when nobody is in the office to notice a broken forward. Water damage and freezing claims averaged $15,400 across 2019 to 2023[4]. A caller with water coming through a ceiling dials the next plumber within minutes and remembers who did not answer.

The FCC's advice for changing phone companies applies here almost word for word: do not end your service with your existing company before starting new service with another[2]. Plan for both answering services to be live at once, then hand over on a date you choose rather than one a contract chooses for you.

List everything that is moving

Before you sign the new service, write down every path a call can take into the old one. Most offices find at least one they forgot: a second line, a tracking number on an old ad, or the owner's cell forwarding straight to the service after five rings.

Example inventory. Add a row for anything else that touches the phones, such as a separate commercial line.
ItemWhere it lives nowWho changes itCheck before cutover
Call forwardingPhone system or carrier settings on each lineOffice manager or phone vendorEvery line and every mode: all calls, after-hours schedule, busy and no-answer
Numbers the service providedThe old service's carrier accountOld service, through a port to your carrierAccount name, list of numbers, port PIN
Scripts and instruction sheetThe old service's systemYou, rewritten for the new providerJob types, ZIP codes, fees you share, wake rules
On-call rotaSpreadsheet or dispatch softwareDispatcherPrimary, backup and owner numbers for the next four weeks
Message deliveryThe old service's settingsNew service, at setupWho gets urgent and routine messages, and how
Call history and recordingsThe old service's portalOld service, on requestExport of the last 12 months before access ends

Forwarding is where most switches leak, because each line can have several modes and each mode its own setting. Call forwarding for a business line explains unconditional, busy and no-answer forwarding, and why a forwarded call sometimes lands in the wrong voicemail.

Build in an overlap

Give yourself two weeks in which both services can answer. The old one stays under contract and set up, ready to take calls back within minutes if the new one stumbles. The new one answers live from cutover day. Check the old contract's notice clause before setting dates: if it needs 30 days' written notice, send it so the end date falls at least two weeks after cutover, not on cutover day. Answering service contract terms covers the clauses that decide this.

Example: a four-week switch
  1. Week โˆ’2

    Sign, send the instruction sheet, request the data export and any port

  2. Week โˆ’1

    Build scripts and run eight test calls on a test number

  3. Day 0, 9 a.m.

    Change forwarding with the office fully staffed

  4. Days 1โ€“7

    Review every call against its recording; old service on standby

  5. Day 14

    Old contract ends after two clean weeks

Example timeline. Move the dates to suit your contracts, but keep the overlap.

Pick the cutover moment

Cut over on a Tuesday or Wednesday morning, with the office fully staffed and the dispatcher at the board. On an average weekday in 2025, 80.5% of employed people worked, against 30.3% on an average weekend day or holiday[5]. Your own team follows the same pattern, so a problem that starts on a Saturday waits for someone to notice it.

Avoid Fridays, the days before a holiday weekend and any week with a hard freeze in the forecast. Pipes in unheated basements, crawl spaces, attics and garages, and pipes against uninsulated outside walls, are the ones that freeze most often[6], and the first cold night of the season fills the phones with exactly the calls a half-configured service handles worst. Do not change answering services in the same fortnight as your field service software either; one change at a time keeps problems traceable.

Moving a number the old service controls

If callers dial a number the old service provided, from a listing, an ad or a van wrap, that number has to come with you, or every one of those calls keeps going to the provider you are leaving. Start the port two weeks out. FCC guidance is that once you request service from a new company, the old company cannot refuse to port your number even if you owe money for a balance or termination fee[2]. Under FCC rules a simple port must be completed within one business day and a non-simple port within four, unless a longer period is requested[1].

Time allowed to complete a number port under FCC rulesUnless the new provider or the customer asks for a longer period.
Time allowed to complete a number port under FCC rulesComparison. Simple port: 1 business days; Non-simple port: 4 business days.1 business daysSimple portSimple port: 1 business days4 business daysNon-simple portNon-simple port: 4 business daysTime allowed to complete a number port under FCC rulesComparison. Simple port: 1 business days; Non-simple port: 4 business days.1 business daysSimple portSimple port: 1 business days4 business daysNon-simple portNon-simple port: 4 business days

Source: Legal Information Institute, Cornell Law School (Code of Federal Regulations), 2026[1]

Show the data
ItemValue
Simple port1 business days
Non-simple port4 business days

Have the paperwork ready before you ask: the account holder's name and service address exactly as the old provider holds them, the account number, any port-out PIN, the full list of numbers to move and a recent bill. A mismatch in any of those can get the request rejected, and every rejection costs days you planned to spend testing.

A simple port request has to reach the current provider between 8 a.m. and 1 p.m. local time to be eligible for activation at midnight the same day[1], so file in the morning and never schedule a port for a Friday. If the number sits inside the old service's own account rather than yours, those rules may not reach it, and you need the provider's written release. Keep the old service answering the ported number until the port completes and a test call reaches the new service.

Rewrite the scripts and run test calls

Do not copy the old scripts across unread. Rewrite them from your current rules: the job types you take and decline, the ZIP codes you cover, the fees you are willing to quote, and who is woken for what. Start from your after-hours call scripts and a written instruction sheet, check the urgent list against what counts as a plumbing emergency, and run these calls to a test number before any real call is forwarded.

  1. Burst pipe at 2 a.m. Does the on-call tech get the call, and how fast?
  2. On-call tech does not answer. Does the backup get it, and what is the caller told?
  3. Address outside your service area. Is it declined politely, with no promise made?
  4. Routine drain cleaning next week. Is it booked, or taken as a request, exactly as agreed?
  5. โ€œHow much is a service call?โ€ Is your approved wording read, and nothing more?
  6. A caller who speaks Spanish. Is the call handled and the message usable in English?
  7. An existing customer upset about yesterday's job. Does it reach the person you chose?
  8. A wrong number or a sales call. Is it closed without waking anyone?

Score each message against its recording: address, ZIP code, callback number, the problem in the caller's words, and urgency. Fix the scripts, then run the failed calls again until they pass.

Cutover day, step by step

  1. 9:00 Change forwarding

    Switch the main line first, then each other line and mode on the inventory. Write down the time of each change.

  2. 9:10 Call from outside

    From a mobile on a different carrier, call every number. Confirm the new greeting, then check the message arrives where it should.

  3. 9:20 Test busy and no-answer

    Call while the office line is busy and again while it rings out, so overflow paths reach the new service too.

  4. Midday: first real calls

    Read every message and listen to the first few recordings. Fix script slips the same day.

  5. Evening: the first night

    The owner or manager keeps a phone on. Call the main line once after closing to confirm the after-hours schedule switched.

  6. Next morning: the handoff

    Review every overnight call against its recording before dispatch starts; the morning handoff sets the routine.

The first two weeks

For the first week, review every call. In week two, review every urgent call and a sample of the rest. Keep a short log of misses: wrong routing, missing fields, slow delivery. If the same miss happens twice, fix the script that day; if it happens three times, ask whether the new service can do what you need. Only then let the old contract run out.

Brief the techs as well. Whoever is on call should know which service now rings them, which number it calls from and what an urgent message looks like, and should save that number in their phone. A 2 a.m. call from an unfamiliar number is easy to dismiss as spam, and that is a miss no script can fix.

The effort pays because night and weekend calls carry real money. The Example below estimates the monthly value of the after-hours calls a switch puts in play.

ExampleExample: the value riding on after-hours calls during a switch
Example: worked figures
InputExample
Night and weekend calls a week20
Share from new customers (%)45%
Share that would book (%)50%
Average job value$500
After-hours calls a month87
From new customers39
Bookings if answered19
Monthly after-hours value$9,743

How it is worked out: After-hours calls a week ร— 4.33 weeks ร— new-customer share ร— booking rate ร— average value.

Assumptions

  • Average job value of $500, the median homeowner spend on plumbing fixture projects in the 2023 American Housing Survey.[7]
  • Water damage and freezing claims averaged $15,400 over 2019 to 2023, which is why urgent callers move on fast when nobody answers.[4]
  • Call counts and shares are placeholders. Take them from the old service's last three monthly reports.

Example. Divide the monthly figure by 4.33 to see what one week of broken forwarding puts at risk.

In this Example the shop's night and weekend calls are worth about $9,700 a month in jobs, roughly $2,250 a week. A forward left pointing at a cancelled service for one week puts most of that at risk, which is the whole case for the overlap.

If the new cover is an SI Employee

The same plan works when the new cover is an SI Employee. It answers forwarded calls all day, after hours on a schedule, or as overflow when lines are busy, using the greeting, questions, ZIP codes and on-call path you approve, and setup includes test calls for a burst pipe, an out-of-area caller and a routine booking before a single real call is forwarded. One detail catches people out: a call cannot be transferred back to the same line that forwarded it, so the on-call path needs a cell or a second number, not the office main line. You can hear a call first on the try page.

Whichever service you move to, carry your routing rules across intact. The commercial contractor example gives each book of accounts its own service line and supervisor; a switch that flattened that into one on-call number would page the wrong person on the first urgent call. The answering service checklist helps you confirm the new provider can carry rules like that.

Frequently asked questions

How long should the overlap be?

Two weeks is a workable minimum: one week to review every call and one to confirm the fixes held. Extend it if the first week turns up repeated misses.

Can the old service refuse to release our number?

Between phone companies, FCC guidance is that the old company cannot refuse to port a number because money is owed[2]. If the number sits in the service's own account, the contract's release clause decides how fast you get it, so ask early.

Should we tell customers we changed services?

Not if the greeting, the number and the promises stay the same. Do update your website and voicemail if anything about how urgent calls are handled has changed.

What if the new service fails on cutover day?

Switch forwarding back to the old service, which is why it stays live during the overlap. Note what failed, fix it on a test number and pick a new morning.

When is the worst time to switch?

Fridays, the day before a holiday weekend and any week with a hard freeze forecast. Plumbers are often on call nights and weekends[3], and that is when a broken forward does the most damage.

References

  1. Legal Information Institute, Cornell Law School (Code of Federal Regulations) (2026). 47 CFR 52.35 - Porting Intervals (opens in a new tab) โ†‘

  2. Federal Communications Commission (copy archived by the U.S. Court of Appeals for the First Circuit Library) (2019). Porting: Keeping Your Phone Number When You Change Providers (FCC consumer guide, archived copy) (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ†‘

  4. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ†‘

  5. U.S. Bureau of Labor Statistics (2025). American Time Use Survey, Table 4: Employed persons working and time spent working on days worked, 2025 (opens in a new tab) โ†‘

  6. American Red Cross (2026). Frozen Pipes (opens in a new tab) โ†‘

  7. U.S. Census Bureau and U.S. Department of Housing and Urban Development (2023). Home Improvements (2023 American Housing Survey infographic) (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo