Sales memberships

Getting technicians to sell memberships

Talk tracks, timing and fair incentives that help plumbing technicians offer maintenance memberships without sounding like salespeople.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why technicians avoid the membership talk
  2. Tie the plan to what the tech just found
  3. When in the visit to mention it
  4. Talk tracks that sound like a technician
  5. Facts technicians can use without exaggerating
  6. Incentives that reward the right behavior
  7. Coaching it in four weeks
  8. Example: one week of offers
  9. Seasonal timing and promises you can keep
  10. Frequently asked questions
  11. References
Sales memberships: Getting technicians to sell membershipsArticle coverSALES MEMBERSHIPSGetting technicians tosell membershipsAva for PlumbersInsightsSales memberships: Getting technicians to sell membershipsArticle coverSALES MEMBERSHIPSGetting techniciansto sell membershipsAva for Plumbers

Key takeaways

  • Technicians offer memberships more often when the offer is tied to something they found in that house, not a generic club pitch.
  • Mention the plan after diagnosis or right after the repair; the invoice moment is for reminders, not persuasion.
  • Give each tech three short scripts that end in an easy no, and coach timing through ride-alongs rather than wording drills.
  • Pay spiffs on members who stay, and have payroll include them in the regular rate used for overtime[1].

Why technicians avoid the membership talk

Most technicians did not join the trade to sell. They fix things, and many have watched a pushy salesperson lose a customer's trust. When a service manager says “offer the membership on every call,” the tech hears “be that person.” The result is a membership program that grows only when the office remembers to mention it on the phone.

BLS lists communication as a key quality for plumbers because they talk with customers all the time[2]. That is the opening. A membership offer is a version of the explanation techs already give: what they found, what happens next, and what would prevent the next problem. Training should make the offer sound like that explanation, not like a pitch.

  • They don't know the plan well enough to answer a follow-up question about what it covers.
  • The offer feels like it belongs at the end, when the customer is paying and wants the visit over.
  • They worry the customer will think the repair was oversold to set up the plan.
  • Nobody has told them what happens after a yes: who schedules the first visit, who bills and who sends the agreement.
  • The incentive is either too small to notice or so large that it feels like a commission they would be embarrassed by.

Tie the plan to what the tech just found

The strongest membership offer is specific to the house. A generic “we have a club” line is easy to refuse. A sentence that links the plan to something the tech saw, such as a water heater full of sediment, a flapper starting to leak or a hose bib that froze last winter, gives the customer a reason that is about their own home.

Rule of thumb: if the technician cannot name one thing in this house that the annual visit would check, skip the offer on this call and note why in the job record.

This also protects trust. Customers can tell a recommendation from a quota. When techs offer the plan only for a real reason, the offers they do make land better, and the conversion rate measures fit rather than pressure. Check what to include in a plumbing maintenance plan so the visit actually covers what the tech is pointing to.

When in the visit to mention it

Where a membership mention fits in a standard service call
MomentWhat the tech saysWhat to avoid
ArrivalNothing about the plan yet. Confirm the problem and how pricing works.Opening with the membership before the repair is understood
Diagnosis“While I was under the sink I noticed the supply lines are original. Not urgent, but worth watching.”Turning every finding into a reason to buy
Presenting the repairShow member and non-member pricing side by side if the plan includes a repair discount.Hiding the non-member option or making it look like a penalty
After the work“This is the kind of thing the yearly visit catches early. Want me to explain how it works?”Reading a brochure aloud while the customer is trying to leave
Invoice and goodbyeLeave a one-page summary showing what the visit covers and how to cancel.Signing someone up without showing renewal and cancellation terms

The diagnosis and after-the-work moments usually convert best because the customer has just seen the technician's expertise. The invoice moment is for reminding, not persuading. If your plan includes repair discounts, the presentation moment matters too: a customer who sees the member price on today's job can judge the value in real terms instead of taking the tech's word for it.

Talk tracks that sound like a technician

Give techs three short scripts and let them put the words in their own voice. Each script should be under 40 words, include a question and end with an easy way to say no.

  1. The finding script: “Your water heater had a lot of sediment in it. I flushed it today, but it builds back up. Our yearly visit flushes it, tests the relief valve and checks the whole house. Want me to tell you what it includes?”
  2. The prevention script: “Today's leak came from a supply line that had been weeping for a while. On a yearly check we look at every one of those in the house. Some customers like that, some don't. Want the details?”
  3. The priority script, for after-hours calls: “You called us late tonight. Members move up the list when we're booked solid. If that matters to you, I can show you the plan before I go.”

Each script names a finding, a benefit and a question. None of them asks for the sale directly. If the customer declines, the tech says “No problem, it's on your invoice if you change your mind,” and moves on. The clean exit is part of the script, because it is what lets the tech make the next offer without dread. For cost pushback, use the patterns in handling price objections.

Facts technicians can use without exaggerating

Techs are more comfortable with a few real numbers than with scare stories. EPA estimates that an average household's leaks can waste more than 9,300 gallons of water a year, a faucet dripping once per second more than 3,000 gallons, and a showerhead leaking 10 drips a minute more than 500 gallons[3]. EPA also advises checking toilet flappers and replacing them at least every five years[3], which is a natural line item for a yearly visit.

What common household leaks can waste in a yearEPA estimates; each figure is a lower bound (more than).
What common household leaks can waste in a yearBar chart. An average household's leaks: 9,300 gallons; Faucet dripping once per second: 3,000 gallons; Showerhead leaking 10 drips a minute: 500 gallons.An average household's leaksAn average household's leaks: 9,300 gallons9,300 gallonsFaucet dripping once per secondFaucet dripping once per second: 3,000 gallons3,000 gallonsShowerhead leaking 10 drips a minuteShowerhead leaking 10 drips a minute: 500 gallons500 gallonsWhat common household leaks can waste in a yearBar chart. An average household's leaks: 9,300 gallons; Faucet dripping once per second: 3,000 gallons; Showerhead leaking 10 drips a minute: 500 gallons.An average household's leaksAn average household's leaks: 9,300 gallons9,300 gallonsFaucet dripping once per secondFaucet dripping once per second: 3,000 gallons3,000 gallonsShowerhead leaking 10 drips a minuteShowerhead leaking 10 drips a minute: 500 gallons500 gallons

Source: U.S. Environmental Protection Agency (WaterSense), 2026[3]

Show the data
ItemValue
An average household's leaks9,300 gallons
Faucet dripping once per second3,000 gallons
Showerhead leaking 10 drips a minute500 gallons

When a leak turns into damage, the cost is far larger. The Insurance Information Institute puts the average homeowners claim for water damage and freezing at about $15,400 for 2019 to 2023[4]. Use that number carefully: it is an average across all water losses, not a promise that the visit prevents one. The honest version is “small leaks are cheap to fix and expensive to ignore.”

Incentives that reward the right behavior

A membership spiff works when it is visible, paid quickly and tied to members who stay. Paying on signup alone invites agreements that cancel after the first billing cycle. A common structure is a small payment when the agreement is signed and a second when the member completes the first visit or the first renewal.

  • Pay on retained members, not just new ones, so the tech cares whether the customer feels the plan was worth it.
  • Keep the amount modest enough that no one feels pushed to oversell, and the same for every tech so nobody argues about territories.
  • Post a simple weekly board: offers made, offers accepted and members still active after 90 days.
  • Never pay on an agreement that was missing the renewal and cancellation terms.

Payroll check: under the Fair Labor Standards Act, compensation for performance generally has to be included in an hourly employee's regular rate, so spiffs can raise overtime pay[1]. Have your payroll provider set them up before the program starts.

Coaching it in four weeks

  1. Week 1: learn the plan

    Every tech can list what the visit includes, how often it happens, what members get on repairs and how to cancel. Quiz them in the morning meeting: five questions, two minutes.

  2. Week 2: practice the scripts

    Role-play the three talk tracks in pairs, with one person playing a skeptical homeowner. Swap roles. The goal is to make the easy-no ending sound natural.

  3. Week 3: ride-alongs

    A lead tech or manager rides with each technician for one day and gives feedback on timing, not wording. Most notes will be about bringing the plan up too late.

  4. Week 4: read the board

    Look at offers made per tech, not only sales. A tech with few offers needs help with timing; a tech with many offers and few yeses needs help linking the plan to findings.

Example: one week of offers

Example (fictional): a five-tech shop runs the program for a week. The techs complete 62 service calls and make 31 membership offers, about one on every second call, because they only offer when they can name a reason. Fourteen customers say yes. One tech made just two offers in 13 calls; his ride-along showed he waited until the invoice. After moving the mention to right after the repair, his next week had seven offers and four yeses.

The lesson is in the measures. Offers per call shows whether techs are comfortable. Acceptance per offer shows whether the offer is specific enough. Track both for a month before you change the incentive, or you will not know which problem you are paying to fix.

Seasonal timing and promises you can keep

Employment at plumbing, heating and AC contractors rose from January to July in 2025 and eased by December[5], a reminder that peak seasons stretch crews thin. Sell the plan all year, but schedule member visits in the shoulder months so they do not compete with emergency work. A member whose visit is cancelled twice for emergencies is unlikely to renew; see improving membership renewal.

Before techs sign customers up on tablets, check that every agreement meets your state's automatic renewal rules; auto-renewal laws for memberships covers what to disclose. Plumbers are often on call for evenings and weekends[2], so a plan that promises priority service must be one your on-call rotation can actually deliver at 10 at night.

Frequently asked questions

Should every technician offer the membership on every call?

No. Offer it when the tech can name a specific reason in that home. Still track offers per call, because a tech who never finds a reason may need coaching on timing.

How large should a membership spiff be?

Large enough to notice and small enough that nobody feels pushed to oversell. Many shops split it between signup and the first completed visit or renewal so that retention counts.

Do spiffs affect overtime pay?

For hourly employees, pay for performance generally counts toward the regular rate used to calculate overtime under the FLSA[1]. Confirm the setup with your payroll provider.

What if a customer thinks the repair was oversold to set up the plan?

Show the non-member price clearly and have the tech say the plan is optional. Customers who feel pressured rarely renew, so pressure shows up later as churn.

References

  1. U.S. Department of Labor, Wage and Hour Division (2019). Fact Sheet #56A: Overview of the Regular Rate of Pay Under the Fair Labor Standards Act (FLSA) (opens in a new tab) ↑

  2. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  3. U.S. Environmental Protection Agency (WaterSense) (2026). Fix a Leak Week (opens in a new tab) ↑

  4. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑

  5. U.S. Bureau of Labor Statistics (2025). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo