Marketing leads

How much should a plumbing company spend on marketing?

How much a plumbing company should spend on marketing: the percent-of-revenue and cost-per-job methods compared, with a worked example and a monthly check.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. The question behind the question
  2. Method 1: percent of revenue
  3. Method 2: cost per booked job
  4. The two methods side by side
  5. Splitting the budget across channels
  6. Example: a five-truck shop
  7. Budget by month, not by year
  8. The monthly budget review
  9. Mistakes that waste the budget
  10. Frequently asked questions
  11. References
Marketing leads: How much should a plumbing company spend on marketing?Article coverMARKETING LEADSHow much should aplumbing company spendon marketing?Ava for PlumbersInsightsMarketing leads: How much should a plumbing company spend on marketing?Article coverMARKETING LEADSHow much should aplumbing companyspend on marketing?Ava for Plumbers

Key takeaways

  • SBA guidance suggests 7-8% of revenue for small businesses under $5 million, within a wide 2-20% range, assuming 10-12% margins[1]. Use it as a starting point, not an answer.
  • The cost-per-job method builds the budget from the jobs you need, your booking rate and what each channel costs per booked job.
  • Most plumbing, heating and AC firms are small: about 63% had receipts under $1 million in 2022[2], so a percentage of revenue can be a very small number in dollars.
  • Set the budget by month, not by year, because demand and staffing move with the seasons[3].

The question behind the question

'How much should I spend on marketing?' usually means 'how much can I spend before it stops paying?'. No percentage answers that by itself. What answers it is knowing how many jobs you need, how many your current sources already deliver, and what an extra booked job costs in each channel you could buy. The two methods below approach the same number from opposite directions. Use both, and when they disagree, find out why.

Start by deciding what counts as marketing. Include paid ads, lead platforms, the website and its hosting, call tracking, review tools, printed material, truck wraps spread over their life, agency fees, and the share of office time spent on marketing tasks. Leave out general overhead. If you don't define the line, last year's figure and this year's figure won't be comparable.

Method 1: percent of revenue

The top-down method sets marketing as a share of revenue. An SBA marketing planning tool notes that budgets vary widely, from 2% of sales to 20% while gearing up a new product or service, and says that as a general rule small businesses with revenue under $5 million should allocate 7-8% of revenue to marketing, split between brand development and promotion. It adds that this assumes margins in the range of 10-12%[1].

The method is simple and it forces discipline: spending rises with the business, not with a sales rep's pitch. Its weakness is that it says nothing about whether the spend works, and for small firms it can produce a figure too small to test any paid channel properly. In 2022, about 63% of plumbing, heating and AC contractor firms had annual receipts under $1 million, and about 17% had receipts under $100,000[2]. Average receipts per firm were about $2.9 million[4], but the average is pulled up by a small number of large firms.

Plumbing, heating and AC contractor firms by annual receipts, 2022Firms with employees. $100k to $1M and $5M or more derived from published totals. U.S. Census Bureau, Statistics of U.S. Businesses
Plumbing, heating and AC contractor firms by annual receipts, 2022Column chart. Under $100k: 17,681; $100k to $1M: 50,040; $1M to $5M: 29,692; $5M or more: 9,591.020,00040,00060,000Under $100k: 17,68117,681Under $100k$100k to $1M: 50,04050,040$100k to $1M$1M to $5M: 29,69229,692$1M to $5M$5M or more: 9,5919,591$5M or morePlumbing, heating and AC contractor firms by annual receipts, 2022Column chart. Under $100k: 17,681; $100k to $1M: 50,040; $1M to $5M: 29,692; $5M or more: 9,591.020,00040,00060,000Under $100k: 17,68117,681Under$100k$100k to $1M: 50,04050,040$100kto $1M$1M to $5M: 29,69229,692$1M to$5M$5M or more: 9,5919,591$5M ormore

Source: U.S. Census Bureau, 2022[2]

Show the data
ItemValue
Under $100k17,681
$100k to $1M50,040
$1M to $5M29,692
$5M or more9,591

Method 2: cost per booked job

The bottom-up method starts from the work you need. It asks how many extra booked jobs you need each month to fill the schedule, how many your free sources (repeat customers, referrals, your Business Profile) already provide, and what each paid channel costs per booked job. Multiply the gap by the cost per booked job and you have a budget tied to capacity.

  1. Set the capacity target

    Technician hours available per month, minus maintenance visits and callbacks, divided by average hours per job. That is how many jobs you can run.

  2. Subtract what you already get

    Average monthly jobs from repeat customers, referrals, members and unpaid search over the last six months.

  3. Find the gap

    Capacity minus existing jobs. If the gap is near zero, more marketing will mostly create waiting lists.

  4. Price the gap by channel

    Cost per booked job for each paid channel, from your own tracked calls and job records, not vendor dashboards.

  5. Check margin per job

    Average gross margin per job from each channel must comfortably exceed its cost per booked job, or the channel loses money even when it fills the schedule.

  6. Compare with the percentage

    If the bottom-up figure is far above the SBA-style range, check your cost per job; if far below, you may be underinvesting or near capacity.

The two methods side by side

Top-down and bottom-up marketing budget methods compared.
QuestionPercent of revenueCost per booked job
Starting pointLast year's or projected revenueJobs needed to fill capacity
Data neededRevenue onlyCapacity, job sources, cost per booked job by channel
StrengthSimple, keeps spend in proportionTies spend to real work and channel results
WeaknessIgnores whether channels workNeeds reliable tracking to be accurate
Best forEarly-stage shops and sanity checksShops with call tracking and job-source data
RiskSpending to a number in a full monthChasing a gap your team can't staff

Splitting the budget across channels

Once you have a monthly total, split it into three layers. The proportions depend on your stage, but the layers keep the budget from becoming a single bet on one platform.

  • Foundation: the website, Business Profile management, review requests, call tracking and reminders to past customers. These are small, steady costs that make every other channel work better, so fund them first and rarely cut them.
  • Demand capture: channels that put you in front of people already looking for a plumber, such as Local Services Ads and search ads. This is usually the largest and most variable layer, adjusted month by month to capacity.
  • Growth and testing: a smaller slice for trying something new, such as a partner program, a new service page set or a direct mail test to one neighborhood. Give each test a goal, a budget and an end date.
  • Reserve: an amount you hold back for weather events or a channel that suddenly performs well, released by decision rather than by default.

Write the split down and keep it for the year. When a vendor asks for more, you can see which layer it would come from and what it would replace.

Example: a five-truck shop

Example (fictional): a five-truck residential shop expects revenue of about 1.8 million dollars this year. At the SBA-style 7-8% rule, the marketing budget would be roughly 126,000 to 144,000 dollars a year, or about 10,500 to 12,000 dollars a month.

The bottom-up view in this example: the shop can run about 300 jobs a month. Repeat customers, referrals and its Business Profile deliver about 210. The gap is 90 jobs. Its tracked cost per booked job is about 95 dollars from Local Services Ads and about 140 dollars from search ads. Filling 60 jobs from the first and 30 from the second costs about 9,900 dollars a month, a little under the percentage figure. The owner sets the monthly budget at 10,000 dollars, keeps a small reserve for testing, and plans to raise spend in the busy months only if the office can still answer every call.

Budget by month, not by year

Demand and staffing move with the seasons. Employment at plumbing, heating and air-conditioning contractors rose from 1,305,900 in January 2026 to 1,357,800 in August 2026, a summer peak about 4% above the winter level[3]. Your own job counts will have their own pattern: frozen pipes in a cold snap, water heaters in early winter, outdoor lines in spring.

  • Use the last two years of booked jobs by week to see your own seasonal curve.
  • Raise paid spend ahead of the weeks you can staff and usually fill, and cut it when the schedule is already full.
  • Keep a reserve for weather events, when emergency demand jumps and costs per click can move.
  • Plan reminder campaigns for the slow weeks, since past customers are the cheapest jobs you can book.

The monthly budget review

  1. Spend by channel against plan.
  2. Booked jobs and revenue by channel from your job records.
  3. Cost per booked job and revenue per booked job by channel.
  4. Answer rate and booking rate on inbound calls, since a falling booking rate makes every channel look worse.
  5. Decisions: keep, raise, cut or stop each line, written down with a reason.

Fifteen minutes with these five lines each month prevents the most common budget failure: paying for a channel for a year because nobody looked. The monthly marketing spend review goes deeper into the routine.

Mistakes that waste the budget

  • Buying leads before you can answer every call; the cost per booked job doubles when half the calls go to voicemail.
  • Judging channels on clicks, impressions or 'leads' instead of booked, paid jobs.
  • Locking into long contracts with lead vendors before testing.
  • Spending on ranking promises; Google says there is no way to pay for a better local ranking in its map results, so what you buy is ads or work, not rank[5].
  • Cutting all marketing in a busy month and starting from zero when it slows down.

Which channels to fund at your size is covered in marketing priorities by stage. Before any paid spend, make sure your Google Business Profile is complete and within the service-area rules.

Frequently asked questions

What percentage of revenue should a plumbing company spend on marketing?

SBA guidance suggests 7-8% of revenue for small businesses under $5 million, within a wide 2-20% range and assuming 10-12% margins[1]. Check that figure against your cost per booked job and your capacity.

Should a new plumbing business spend more on marketing?

Often yes, as a share of revenue, because it has fewer repeat customers and referrals. SBA notes budgets can reach 20% while launching something new[1]. Keep spend within what you can answer and staff.

How do I calculate cost per booked job?

Divide what you spent on a channel in a period by the number of booked jobs that came from it, using tracked calls and job records rather than the vendor's lead count.

Does the marketing budget include the website and truck wraps?

Usually yes. Include anything whose main purpose is attracting or keeping customers, and spread long-life items like wraps over their useful life.

References

  1. U.S. Small Business Administration, SBA Ascent (2021). Create Your Marketing Plan (Strategic Marketing tool) (opens in a new tab) โ†‘

  2. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: Firms by industry and enterprise receipts size (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822001) (opens in a new tab) โ†‘

  4. U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ†‘

  5. Google Business Profile Help (2026). Tips to improve your local ranking on Google (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo