Key takeaways
- A dispatch board is only useful if it matches reality. Every rule below exists to keep the board honest at any moment of the day.
- Use one lane per tech plus lanes for unassigned work, holds, returns and parts on order, and limit status colors to six or fewer.
- Every hold gets an owner and an expiry time; expired holds are released automatically at the morning review.
- Tech hours are scarce: construction had 298,000 job openings in September 2026, up from 206,000 a year earlier[1]. A clean board gets more paid work out of the crew you have.
What the board is for
The dispatch board answers four questions at a glance: where is every tech, what are they doing, what is waiting, and what has been promised to whom. Whether it is a whiteboard, a spreadsheet or a field-service system, it fails the moment it stops matching reality. A job marked in progress that finished an hour ago, a hold nobody remembers, a tech shown in the north when they are stuck in traffic in the south: each of these leads to a wrong promise on the phone.
Plumbers travel to worksites every day[2], so the board is also the main tool for limiting drive time and keeping arrival windows. And because good techs are hard to find, every hour lost to a bad board is an hour of skilled labor you cannot easily replace.
Source: U.S. Bureau of Labor Statistics, 2026[1]
Show the data
| Item | Value |
|---|---|
| September 2025 | 206 thousand |
| September 2026 | 298 thousand |
Hiring will not fix a messy board. Construction job openings rose from 206,000 to 298,000 between September 2025 and September 2026, an openings rate of 3.4%[1]. When every shop is competing for the same techs, the ones who get the most paid hours out of their existing crew have an edge, and that starts with knowing exactly where everyone is.
Give the board one owner
A board that everyone can change and nobody owns drifts fast. Name one person, usually the dispatcher or service manager, as the owner for each day. Techs update their own statuses and notes, and the office books jobs into the unassigned lane, but only the owner moves jobs between lanes, creates holds and changes promised windows. When the owner is out, the handover is explicit: a named stand-in, told in writing.
This is not about control for its own sake. When a customer calls to ask where the plumber is, the person answering needs to trust what the board says. That trust only exists if changes come through one place.
Set up the lanes
- One lane per tech, in the same order every day, ideally grouped by zone or skill.
- Unassigned: booked jobs without a tech yet. This lane should be empty by mid-morning.
- Holds: time reserved for a likely job, a quote follow-up or a customer who has not confirmed. Each hold shows an owner and an expiry time.
- Emergency reserve: capacity kept open for same-day urgent calls, described in holding emergency slots open.
- Returns: jobs that need a second visit, with the reason.
- Parts on order: jobs that cannot be scheduled until a part arrives, with the expected date.
Avoid adding lanes for every special case. If a lane is empty most days, fold it into another one.
Keep status colors simple
| Status | Color | Meaning | Changed by |
|---|---|---|---|
| Scheduled | Gray | Booked and confirmed, not started | Dispatcher |
| En route | Blue | Tech driving to the job, customer has an ETA | Tech |
| On site | Green | Tech working at the address | Tech |
| Waiting | Amber | On site but blocked: approval, access or parts | Tech |
| Complete | Dark gray | Work done, invoice sent or ready | Tech |
| Problem | Red | Running late past the window, customer issue or safety concern | Tech or dispatcher |
Six statuses are enough for almost every shop. More colors make the board harder to read, and techs stop updating statuses they do not understand. Red should be rare and should always mean someone needs to act.
Rules for holds
- Every hold has an owner, a reason and an expiry time written on it.
- Holds for unconfirmed customers expire at a fixed time, such as 4 p.m. the day before.
- Holds for likely jobs, such as a pending quote, last no more than two business days.
- Expired holds are released at the morning review without discussion.
- No more than a set share of any tech's day can be holds, so the board does not fill with maybes.
Holds feel harmless because they cost nothing to create. In practice they are the main reason a board looks full when it is not. A dispatcher who sees a tech's afternoon blocked by two holds will tell a caller there is nothing until tomorrow, and the job goes to a competitor. When a hold expires and the time is released at 8 a.m., that slot can be sold to the first caller of the day instead.
What every job card must show
- Customer name, address and ZIP code, with access notes.
- The arrival window promised, not just the start time.
- The problem in plain words and the job type.
- Skills, license or equipment needed, so the right tech gets it.
- Estimated duration, so the dispatcher can see whether the day fits.
- Payment notes, such as a deposit taken or a commercial purchase order.
Communication is one of the key qualities BLS lists for plumbers, because they deal with customers regularly[3]. A complete job card means the tech arrives already knowing what the customer was told.
The morning review
Close yesterday
Every job from yesterday ends complete, return or problem. Nothing stays on site or en route overnight.
Bring in the night
Add overnight calls from the after-hours log, with promised slots placed first.
Release expired holds
Remove holds past their expiry and move the time to unassigned or emergency reserve.
Check each lane
Confirm the first job, the drive between jobs and that the day fits the hours available. Move jobs between lanes to cut drive time.
Confirm with customers
Send arrival window confirmations by text for the day's jobs.
Brief the techs
A short message to each tech with their first job and anything unusual.
Fifteen to twenty minutes is enough once the habit is set. See the morning handoff after overnight calls for the night part of this routine.
Midday check and board hygiene
At around midday, check every lane against the clock. Any tech running more than an hour behind is a decision point: move their afternoon job to another tech, call the customer with a new window, or approve overtime. Doing this at midday rather than at 3 p.m. leaves room to fix it.
- Techs update their own status from the phone; the dispatcher does not guess.
- Nothing is scheduled by a side conversation; if it is not on the board, it is not booked.
- Job durations are updated when a job runs long, so the next day's estimates improve.
- Red statuses get a response within fifteen minutes.
- The board is reviewed by a second person once a week for stale items.
Measure board health weekly
- Share of jobs where the tech arrived inside the promised window.
- Number of holds that expired without becoming jobs.
- Time of day the unassigned lane was first empty.
- Jobs left in an open status overnight.
- Red statuses and how long each took to resolve.
Five numbers, checked every Friday, tell you whether the rules are holding. If one gets worse for two weeks running, find the rule behind it and fix that, rather than adding a new lane or color.
Example: a board that drifted
Example: a fictional six-tech shop notices customers complaining about missed windows. A look at the board shows eleven holds, five of them more than a week old, and two techs still shown on site from the previous afternoon. The dispatcher releases the stale holds, adds expiry times to every new hold and starts the morning review. Within a month, the unassigned lane is empty by 10 a.m. most days, and complaints about windows fall to one or two a week.
Whiteboard, spreadsheet or software?
A whiteboard works for two or three techs in one office. It fails when the dispatcher is out, when techs cannot see it from the field and when you want to measure anything. A shared spreadsheet is a step up but has no live status from the field. Field-service software gives techs status updates on their phones, sends customer texts and keeps a history, which is what makes the rules above enforceable. Whatever you use, a dispatcher earns a median of $50,340 a year[4], and the board is where most of that time goes; give them a tool that does not fight them. For assigning work within the board, see matching technicians to jobs by skill and cutting drive time between jobs.
Frequently asked questions
What should a plumbing dispatch board show?
Every tech's lane and current status, unassigned jobs, holds with owners and expiry times, emergency reserve capacity, return visits and jobs waiting on parts.
How many status colors should a dispatch board use?
Six or fewer: scheduled, en route, on site, waiting, complete and problem. More colors make the board harder to read and update.
How do I stop holds from clogging the schedule?
Give every hold an owner, a reason and an expiry time, and release expired holds at the morning review without discussion.
When should the dispatcher review the board?
Every morning before the first jobs, at midday to catch techs running behind, and weekly with a second person to clear stale items.
References
U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Survey, Table 1: Job openings levels and rates by industry (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) โ
O*NET OnLine (U.S. Department of Labor), BLS 2025 wage data (2025). National Wages 43-5032.00 - Dispatchers, Except Police, Fire, and Ambulance (opens in a new tab) โ