Key takeaways
- Spring is when winter's damage shows: a frost-free sillcock that split in January often leaks inside the wall only when the hose is first turned on.
- Outdoor water is a big share of use, up to 60% of household water in arid regions, so leaks and controller settings matter to customers' bills.
- Bundle the visit: hose bib check, irrigation start-up and leak test, and backflow testing where your water utility requires it.
- Run the campaign on a calendar tied to your last frost date, with consent-based texts and a simple booking path.
Why outdoor water deserves its own campaign
Outdoor water is easy to overlook in a plumbing business because it is seasonal and often handled by landscapers. It is also where a lot of water goes. EPA estimates residential outdoor water use at nearly 8 billion gallons a day, mainly for landscape irrigation[1], and in arid regions outdoor use can be as much as 60% of total household water use[2]. When something leaks outdoors, it usually leaks for a long time before anyone notices.
EPA's figure for a small irrigation leak makes the point: a leak 1/32 of an inch in diameter can waste about 6,300 gallons of water a month[3]. A spring check that catches one is easy for a homeowner to value, and it opens the door to the other outdoor work a plumbing company does well.
Outdoor work also fits the calendar well. It arrives after the freeze season and before summer storms, in weeks that are often quieter for indoor repairs, and much of it can be scheduled by neighborhood. A shop that owns spring outdoor water fills those weeks with planned, routable visits instead of waiting for the phone.
The three problems spring reveals
The Red Cross lists hose bibs and sprinkler supply lines among the pipes that freeze most often[4]. The damage from those freezes is usually discovered in spring, not winter.
| Problem | How the customer notices | What you do |
|---|---|---|
| Split frost-free sillcock | Water inside the wall or basement only when the hose is on | Replace the sillcock, check the wall cavity, fit a vacuum breaker |
| Split standard hose bib or supply line | Spray or drip at the faucet, ice damage visible | Replace with a frost-free model sized to the wall |
| Cracked irrigation backflow assembly | Water pouring at the assembly on start-up | Repair or replace, then test where required |
| Leaking irrigation lines or valves | Soggy patches, high water bill, meter moving with everything off | Leak test, locate and repair or refer |
| Controller set for last summer | Watering in rain or at midday, high bills | Adjust schedule or offer a weather-based controller |
Tell customers: the first time you use the hose this spring, check inside the wall behind the faucet. A frost-free faucet that froze with a hose attached can split out of sight.
Backflow testing: the anchor service
Irrigation systems connected to drinking water need backflow protection, and many water utilities require the assemblies to be tested by a certified tester, often every year. That requirement gives you a natural reason to contact customers each spring and a visit that can include everything else on the outdoor checklist. Check your utility's cross-connection program for the testing interval, the forms it accepts and whether it notifies customers directly; some utilities publish lists of certified testers, and getting on that list is free marketing.
- Keep a list of every assembly you test, with its location, type, serial number and due date.
- Send reminders a few weeks before the due date, before the utility's notice arrives.
- File test reports promptly in the format the utility requires, and give the customer a copy.
- Quote repairs on failed assemblies in writing and retest after repair.
Smart controllers and the savings story
EPA says WaterSense labeled irrigation controllers can save a home up to 15,000 gallons of water a year, and labeled faucets and aerators about 700 gallons a year[5]. For customers with big lawns or high summer bills, a weather-based controller is often the most useful upgrade you can offer outdoors. In some states irrigation system work needs its own license, so check what your plumbing license covers before you sell controller installs or zone repairs.
Source: U.S. Environmental Protection Agency, WaterSense, 2026[5]
Show the data
| Item | Value |
|---|---|
| Irrigation controller (up to) | 15,000 gallons |
| Faucets and aerators | 700 gallons |
Present controller upgrades as an option, not a cure. The savings depend on how badly the old schedule was set, the size of the landscape and local watering rules. Show the customer their current schedule, explain what a weather-based controller would change and let them decide.
A spring campaign calendar
Six weeks before your average last frost
Build the target list: backflow assemblies due, customers with irrigation, homes where you replaced split hose bibs before.
During Fix a Leak Week
EPA's annual Fix a Leak Week ran March 16 to 22 in 2026[3]; use it for a leak-check offer that includes outdoor faucets and the meter test.
Two weeks before last frost
Send the spring start-up offer: hose bib check, irrigation start-up and leak test, backflow test where due.
After last frost
Schedule start-ups by neighborhood to keep routes tight; send a reminder to check inside walls when the hose first goes on.
Early summer
Follow up on high-bill complaints with leak detection, and offer controller upgrades to customers with heavy outdoor use.
The Fix a Leak Week date comes from EPA's WaterSense program[3], and many local water utilities promote it, which makes your message feel timely rather than salesy.
Messages and consent
Texts work well for seasonal reminders, but they are regulated. FCC rules require telemarketers to obtain prior express written consent before robocalling consumers, and AI-generated voices are held to the same standard[6]. Treat automated promotional texts with the same care: collect clear consent when customers book, keep reminders and promotions on separate lists, and include an opt-out in every message.
Template: [Company] here. Spring check time: we'll test your backflow, check outdoor faucets for winter splits and leak-test your irrigation in one visit. Reply BOOK or call [number]. Reply STOP to opt out.
On the visit: a 30-minute outdoor checklist
- Record the meter reading with all fixtures off and watch for movement.
- Open each hose bib with a hose attached and check inside the wall or basement behind it.
- Test the backflow assembly where due and inspect it for freeze damage.
- Run each irrigation zone briefly and look for geysers, soggy areas and misaligned heads.
- Check the controller schedule and rain sensor, and suggest seasonal settings.
- Photograph findings and give a written list of repairs with prices.
Pricing and packaging the visit
Customers respond better to one clear spring visit than to a menu of small services. Price the bundle as a single flat visit that covers the backflow test where due, the hose bib check and the irrigation leak test, and quote repairs found on the visit separately. Keep the bundle the same across the season so CSRs can explain it in one sentence. For customers without irrigation, offer a shorter outdoor faucet and leak check, and for members, include the spring check in the agreement so it books itself.
Make booking easy
- Give the campaign its own short page that repeats the offer, lists what is included and has one booking button.
- Offer time windows by neighborhood so customers pick from slots that keep routes tight.
- Ask the questions that matter at booking: irrigation or not, backflow due date if known, any leaks seen, gate access and pets.
- Send a reminder the day before with what to expect, including that water may be off briefly.
- Answer the phones during campaign weeks; a reminder text that prompts a call nobody answers wastes the campaign.
Commercial and multifamily outdoor accounts
Apartment complexes, homeowner associations, churches and office parks often have several backflow assemblies and large irrigation systems on one site. They are worth a separate approach: a single annual agreement for testing every assembly, a spring start-up and a fall shut-down, with a site map and test report for each device. Property managers value a vendor who tracks the due dates for them and files reports with the utility on time, and one site can produce as many tests as dozens of homes.
Example: a spring campaign for a mid-size shop
Example (fictional): a shop that tests about 400 backflow assemblies a year sends reminders in early March, bundling the test with a hose bib check and irrigation leak test. It runs a Fix a Leak Week offer to past customers and schedules start-ups by neighborhood once the last frost passes. The bundle raises the average ticket on backflow visits because technicians find split sillcocks and leaking valves, and the shop adds smart controller installs for customers who complained of high bills.
Plan the rest of the year with plumbing demand by month, fill quiet weeks with slow season revenue, and see backflow testing certification for the tester requirements.
Frequently asked questions
Why does my outdoor faucet leak inside the wall in spring?
A frost-free faucet that froze with a hose attached can split inside the wall. The leak only appears when the faucet is opened, often on the first spring use.
How often does an irrigation backflow preventer need testing?
It depends on your water utility or state program, and many require annual testing by a certified tester. Check the local cross-connection rules.
How much water can an irrigation leak waste?
EPA says a leak just 1/32 of an inch in diameter can waste about 6,300 gallons a month.
Can a plumber install irrigation controllers?
Often, but some states license irrigation work separately. Check what your plumbing license covers before selling irrigation installs.
References
U.S. Environmental Protection Agency, WaterSense (2026). Outdoor water use: WaterSense (opens in a new tab) โ
U.S. Environmental Protection Agency, WaterSense (2026). Statistics and Facts (opens in a new tab) โ
U.S. Environmental Protection Agency, WaterSense (2026). Fix a Leak Week (opens in a new tab) โ
American Red Cross (2026). How to prevent and thaw frozen pipes (opens in a new tab) โ
U.S. Environmental Protection Agency, WaterSense (2026). About WaterSense (opens in a new tab) โ
Federal Communications Commission (2024). FCC declaratory ruling on AI-generated voices under the TCPA (opens in a new tab) โ