Reviews customer experience

Handling manufacturer warranty claims for customers

Handling manufacturer warranty claims for plumbing customers: checking coverage, documenting failures, disclosing labor charges and water heater claims.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Who pays for what
  2. Disclose labor charges before you start
  3. Check coverage before the truck rolls
  4. Document the failure
  5. The claim, step by step
  6. Water heaters: claim or replace?
  7. Resulting water damage
  8. What customers should know about tie-ins
  9. Who handles the paperwork
  10. Example: a leaking tank at year six
  11. Frequently asked questions
  12. References
Reviews customer experience: Handling manufacturer warranty claims for customersArticle coverREVIEWS CUSTOMER EXPERIENCEHandling manufacturerwarranty claims forcustomersAva for PlumbersInsightsReviews customer experience: Handling manufacturer warranty claims for customersArticle coverREVIEWS CUSTOMER EXPERIENCEHandling manufacturerwarranty claims forcustomersAva for Plumbers

Key takeaways

  • A manufacturer warranty usually covers the product, not your labor. Many limited warranties say outright that the customer pays labor charges[1].
  • Disclose labor, trip and handling charges in writing before you start the warranty work.
  • Document everything: model and serial plate, install date, proof of purchase and photos of the failure.
  • Water heaters are the most common claim. Most storage units last 10–15 years and water heating is about 18% of home energy use, so a failure is also a decision point[2].
  • Resulting water damage is usually an insurance matter; average water damage and freezing claims are $15,400[3].

Who pays for what

Customers often hear “it’s under warranty” and assume the visit will be free. Usually it will not be. The manufacturer’s warranty typically covers the part or the unit; your company’s workmanship warranty covers your installation; and the labor to diagnose, remove and replace a failed part is often the customer’s cost unless the manufacturer’s terms say otherwise.

The FTC’s guide to federal warranty law shows how this looks in practice. Its sample limited warranties include one that covers parts “but not labor to install the parts” and another that states “You must pay any labor charges”[1]. The exact terms vary by manufacturer and product, so read the actual warranty for the unit in front of you.

Typical patterns only. The warranty document decides.
SituationPart or unitLaborWho explains it
Failed part, unit you installed, within your workmanship periodManufacturerYou, if the failure is workmanship; otherwise per the termsTech on site
Failed part, unit installed by othersManufacturer, if registered and in termCustomer, unless the warranty includes laborOffice before the visit
Tank leak on a water heater in warrantyManufacturer replacement tank or creditCustomer, unless labor coverage appliesOffice and tech
Unit out of warrantyCustomerCustomerTech with options

Disclose labor charges before you start

The biggest source of warranty-related complaints is a bill the customer did not expect. Preparing cost estimates is a core plumber duty[4]; on warranty jobs, the estimate should separate what the manufacturer covers from what the customer pays. Do this in writing before any work.

  • Office script when booking: “The manufacturer’s warranty may cover the part. Our visit, the diagnosis and the labor to replace it are usually not covered by the manufacturer. Our tech will confirm the costs before doing any work.”
  • Tech script on site: “The new part is covered by the manufacturer. The labor to swap it out is [amount], and that’s what you’d pay today. Would you like me to go ahead?”
  • If you charge for paperwork or handling of the claim, say so and say how much, up front.

Never describe a job as “free under warranty” unless you have confirmed in writing that both the part and the labor are covered.

Check coverage before the truck rolls

  1. Collect details on the call

    Brand, model, approximate install date and who installed it. Ask the customer to photograph the rating plate if they can.

  2. Look up the terms

    Check the manufacturer’s warranty period for the part and whether registration was required.

  3. Confirm proof of purchase

    Find your own invoice if you installed it, or ask the customer for theirs.

  4. Set expectations

    Tell the customer what may be covered and what they will likely pay, before booking.

  5. Order or reserve parts

    If the supplier or distributor handles warranty parts, check stock so the tech is not sent twice.

Document the failure

  • Photo of the model and serial number plate, readable.
  • Photo or short video of the failure: the leak, the error code, the failed component.
  • Notes on installation: venting, expansion tank, pressure, anything a manufacturer might ask about.
  • Date of the visit and the tech’s name.
  • Copy of the original invoice or proof of purchase.
  • Any authorization or claim number from the manufacturer or distributor.

Store it all against the job in your field software. Manufacturers and suppliers sometimes ask for the failed part back, and a missing photo can mean a denied claim that your company or the customer then has to absorb.

The claim, step by step

  1. Diagnose and confirm the part has failed, not something upstream such as high pressure or bad gas supply.
  2. Contact the manufacturer or distributor through its warranty channel and get an authorization if one is required.
  3. Collect the replacement part or unit from the supplier, or order it.
  4. Install, test and photograph the finished work.
  5. Return the failed part if required, tagged with the claim number.
  6. Invoice the customer only for what you disclosed, and give them a copy of the claim details.
  7. Register the new part or unit with the manufacturer if that is required for its own warranty.

Water heaters: claim or replace?

Water heater tanks are the warranty claim plumbers see most. Context helps the customer decide. Most storage water heaters last 10–15 years, while tankless units can last more than 20[2]. Water heating is the second largest energy expense in the home and typically accounts for about 18% of energy use[2].

Water heating’s typical share of home energy useU.S. Department of Energy, Energy Saver Guide
Water heating’s typical share of home energy useDonut chart. Water heating: 18%.Water heating: 18%18%
  • Water heating 18%

Source: U.S. Department of Energy, 2022[2]

Show the data
ItemValue
Water heating18%

So when a tank fails and a warranty replacement is available, the customer has a real choice: a like-for-like replacement under warranty, paying labor, or an upgrade to a more efficient unit. Present both with prices. Do not suggest any tax credit unless you have checked the current rules: the federal energy efficient home improvement credit, which covered 30% of qualified costs within annual caps, applied to improvements made through December 31, 2025[5][6].

18%

typical share of home energy use that goes to water heating[2]

Resulting water damage

When a tank or supply line fails, the bigger cost is often the water on the floor. The average homeowners insurance claim for water damage and freezing was $15,400 over 2019–2023[3]. Read the manufacturer’s warranty before saying anything about damage; many limit coverage to the product. Encourage the customer to contact their insurer, document the damage with photos before cleanup, and keep the failed unit until the insurer and manufacturer have said they do not need it.

If the failure might involve your installation, treat it as a potential damage claim against your company too: notify your own insurer and avoid admitting fault on the spot. The steps are in complaint handling and service recovery offers.

What customers should know about tie-ins

Customers sometimes worry that using a different plumber, or non-branded parts elsewhere in the system, will void a manufacturer’s warranty. Under federal law, a warrantor generally cannot require the use of a particular brand of product or service to keep warranty coverage, with narrow exceptions such as items provided free under the warranty[1]. Manufacturers can still require correct installation to code, so the quality of the install matters.

Who handles the paperwork

Warranty claims eat office time: calls to distributors, photos, authorization numbers and return tags. Assign one person to own them, keep a simple claim tracker with status and dates, and review open claims weekly. Customers judge you on the whole process, not just the repair, so text updates while waiting for a part are worth the minute they take.

  • Tracker fields: customer, job number, brand and model, serial number, claim or authorization number, date filed, part status, date installed, failed part returned (yes or no), amount billed to the customer.
  • Weekly check: any claim open more than a week gets a call to the distributor and a text to the customer.
  • Monthly check: which brands and parts fail most often, and whether that should change what you recommend.

Example: a leaking tank at year six

Example (fictional): a customer calls about water around a six-year-old tank installed by another company. The office asks for a photo of the rating plate, finds the tank is within the manufacturer’s tank warranty, and explains that the tank may be replaced under warranty but labor, haul-away and code upgrades are the customer’s cost. The tech confirms the leak, photographs the plate and the failure, and gives two written options: warranty replacement plus labor, or a higher-efficiency unit at full price.

In this example the customer chooses the warranty replacement. The office obtains the authorization, the supplier provides the tank, and the invoice matches the estimate exactly. The customer’s insurer handles the small amount of floor damage. Six weeks later the customer calls the same shop for a drain problem. See workmanship warranty terms and satisfaction guarantee wording.

Frequently asked questions

Does a manufacturer warranty cover the plumber’s labor?

Often not. Many limited warranties cover only the part or unit, and some state that the customer pays labor. Check the warranty for the specific product.

What do I need to file a water heater warranty claim?

The model and serial number, install date, proof of purchase, photos of the failure and any registration details. Some manufacturers require an authorization number and the failed part back.

Should plumbers charge for handling warranty paperwork?

Some do. If you charge, disclose the amount before work starts and put it on the estimate.

Will using another plumber void a manufacturer warranty?

Federal law generally bars warrantors from requiring a particular brand of service to keep coverage, but proper installation to code can still be a condition.

References

  1. Federal Trade Commission (2026). Businessperson's Guide to Federal Warranty Law (opens in a new tab) ↑

  2. U.S. Department of Energy (2022). Energy Saver Guide: Tips on Saving Money and Energy in Your Home (opens in a new tab) ↑

  3. Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) ↑

  4. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab) ↑

  5. Internal Revenue Service (2023-2025). Energy Efficient Home Improvement Credit (opens in a new tab) ↑

  6. Internal Revenue Service (2025). Energy Efficient Home Improvement Credit (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo