Key takeaways
- A line of credit is for timing gaps you can see coming and repay from known receipts, not for covering losses or buying long-life assets.
- It is the product small firms apply for most: 40% of loan, line and cash advance applicants sought a business line of credit[1].
- Size the line from your 13-week cash forecast: the largest expected gap plus a buffer, not the largest amount the bank will offer.
- Rates usually float over prime, which stood at 7.00% from September 17, 2026[2]; draw only what you need and repay as cash arrives.
What a line of credit does
A business line of credit is a revolving limit you can draw on, repay and draw again. Interest is charged only on the amount drawn, usually at a variable rate tied to the prime rate. It is the financial equivalent of a spare tire: useful for getting through a known rough patch, risky if you drive on it every day.
For a plumbing company, the classic use is timing. Work is done and paid for on one schedule; wages, suppliers and taxes are paid on another. A line of credit covers the weeks in between, so payroll does not depend on when a property manager's accounts payable department gets around to your invoice.
When it is the right tool
- Seasonal build-up. Hiring and stocking ahead of freeze season or summer replacement demand, repaid as that season's work is collected.
- Weather surges. A hard freeze fills the board, and much of that work is paid slowly through insurance. Water damage and freezing claims ran at 1.50 per 100 insured homes a year over 2019 to 2023[3], so a surge in your area can mean weeks of slow receivables.
- Large job materials. Buying equipment and materials for a commercial job or repipe before progress payments arrive.
- Slow-paying accounts. Covering the gap while commercial, home warranty or insurance invoices work through approval.
- Bridging a planned purchase. Paying a deposit on equipment while a term loan closes, then repaying the line from the loan.
When it is the wrong tool
- Covering recurring losses. If jobs lose money, borrowing makes the hole deeper.
- Buying vans or equipment you will keep for years. Use a term loan or lease that matches the asset's life.
- Funding owner draws the business cannot afford.
- Paying one debt with another, month after month.
- Replacing a cash reserve permanently. A line can be reduced or frozen by the bank, often when you need it most.
A good test: before each draw, name the specific receipt that will repay it and the week you expect it. If you cannot, the draw is probably covering a problem, not a timing gap.
How small firms use credit
Lines of credit are the most common financing product small businesses apply for. In the Federal Reserve Banks' survey of small employer firms, 40% of loan, line of credit and cash advance applicants sought a business line of credit, more than any other product. Of those applicants, 47% were fully approved, 28% partially approved and 24% denied[1].
The reasons firms gave for seeking financing match the uses above: 56% wanted to meet operating expenses and 40% wanted credit available for future use as needed[1]. The second reason is the smart one. A line arranged while the business is healthy, and left mostly undrawn, is far easier to get than one requested in the middle of a cash crunch.
Why plumbing cash needs a cushion
Demand and staffing move with the seasons. Employment at plumbing, heating and AC contractors ran from 1,305,900 in January 2026 to 1,357,800 in August 2026, a summer level about 4% above winter[4]. Labor is the largest steady outflow; payroll equalled about 27% of receipts at plumbing, heating and AC contractors in 2022[5]. When receipts lag the work, payroll is the bill that cannot wait, and that is the gap a line of credit is meant to cover.
What it costs
Most lines carry a variable rate quoted as a margin over prime. The bank prime loan rate was 7.50% at the start of 2025, 6.75% at the start of 2026 and 7.00% from September 17, 2026[2]. Add any annual fee, unused-line fee or draw fee to the interest when you compare offers.
Example: a fictional shop draws $60,000 for eight weeks during a winter surge at a 10% annual rate. Interest is roughly $60,000 times 10% times eight fifty-seconds, or about $920. That is a modest price for keeping payroll on schedule and staying current with the supply house; the same $60,000 carried all year would cost about $6,000.
Sizing the line
Start from the cash forecast
Use a rolling 13-week forecast to find the lowest expected balance in a normal year, including payroll, supplier payments, taxes and insurance renewals.
Find the largest gap
Measure how far the lowest point falls below your cash floor, such as two payrolls.
Add a buffer
Add a margin for a surge or a large customer paying late. A third on top of the expected gap is a reasonable start.
Check repayment
Confirm that receipts in the following weeks repay the peak draw within the line's clean-up period, if it has one.
Review yearly
Revisit the size each year with the budget, and ask for an increase before the busy season, not during it.
Example: one winter's draws
Example: a fictional eight-truck shop with a $100,000 line uses it through a cold January.
| Week | Event | Draw or repayment | Balance |
|---|---|---|---|
| 1 | Freeze, overtime payroll, extra stock | Draw $45,000 | $45,000 |
| 3 | Insurance jobs invoiced, not yet paid | Draw $20,000 | $65,000 |
| 6 | Two property-management payments arrive | Repay $30,000 | $35,000 |
| 8 | Insurance payments arrive | Repay $35,000 | $0 |
Example, continued: each draw had a named source of repayment, and the line was back to zero within two months. The shop paid interest on an average balance of about $44,000 for eight weeks, kept every technician paid on time and took on surge work its competitors turned away.
Alternatives to compare
A bank line is not the only way to cover a seasonal gap, and it is worth comparing the options honestly before signing.
- Cash reserves. Building a reserve from strong months is the cheapest cushion of all, and nobody can freeze it.
- Supplier terms. Longer payment terms or a higher credit limit at the supply house cover material-heavy surges at no interest if you pay on time.
- Deposits and progress billing. On larger jobs, collecting a deposit or billing in stages shrinks the gap before it starts.
- Business credit cards. Useful for small, short gaps paid off within the grace period; expensive if balances carry.
- Merchant cash advances. Fast but often very costly, with repayment taken from daily card receipts; read the total cost carefully before using one.
Most shops end up using a combination: a reserve for ordinary dips, supplier terms for materials and a line of credit held in reserve for the bigger, rarer gaps that a freeze or a slow-paying commercial client can create.
Terms to read before signing
- Rate and index: the margin over prime and how often it resets.
- Fees: annual, unused-line, draw and early-termination fees.
- Clean-up period: some lines require a zero balance for a set number of days each year.
- Collateral: often a lien on receivables, inventory or all business assets.
- Personal guarantee: usually required for small businesses.
- Covenants: minimum balances, financial reporting or limits on other borrowing.
- Renewal: when the line is reviewed and what can cause the bank to reduce or freeze it.
Ask the bank what financial statements it will want each year and when. Lenders renew lines more readily for borrowers who send clean, timely numbers, which is another reason to keep bookkeeping current and organized by department, as covered in the guide to departmental profit and loss.
Rules for using it well
- Draw for a named reason and record it in the cash forecast.
- Repay from the receipts you named, as soon as they arrive.
- Review the balance weekly in the cash meeting.
- If the balance has not returned to zero in a full season, find out why before drawing more.
- Keep chasing receivables; a line is not a substitute for collecting what you are owed. See collecting unpaid invoices.
Apply when you do not need the money, ideally after a strong season with clean financial statements. For longer-term needs, compare the line with SBA loans and equipment financing, which match the repayment to the life of what you buy.
Frequently asked questions
How large a line of credit does a plumbing company need?
Size it from your cash forecast: the largest expected seasonal gap below your cash floor, plus a buffer for a surge or a late payer. Bigger is not better if you will be tempted to use it for the wrong things.
Is a line of credit better than a term loan?
For short timing gaps, yes. For vans, equipment or a buyout you will repay over years, a term loan or lease that matches the asset's life is usually better.
When should I apply for a line of credit?
Before you need it, ideally after a strong season with clean financial statements. Banks are more willing to lend to a business that does not urgently need the money.
References
Federal Reserve Banks (2025). 2025 Report on Employer Firms: Findings from the 2024 Small Business Credit Survey (opens in a new tab) โ
Board of Governors of the Federal Reserve System, via Federal Reserve Bank of St. Louis (FRED) (2026). Bank Prime Loan Rate (DPRIME) (opens in a new tab) โ
Insurance Information Institute (2019-2023). Facts + Statistics: Homeowners and renters insurance (opens in a new tab) โ
U.S. Bureau of Labor Statistics, Current Employment Statistics (2026). All employees, plumbing, heating, and air-conditioning contractors, not seasonally adjusted (CEU2023822001) (opens in a new tab) โ
U.S. Census Bureau (2022). Statistics of U.S. Businesses 2022: U.S. and states, 6-digit NAICS (opens in a new tab) โ